Cobra SC201 User manual

INTRODUCTION..................................................................................................................... 3
SC 201 SMART DASH CAM FEATURES................................................................................ 3
PRODUCT SERVICE AND SUPPORT .................................................................................... 4
WHAT’S IN THE BOX ............................................................................................................. 4
OPTIONAL ACCESSORIES – available at www.cobra.com................................................... 4
HARDWARE INTERFACE ....................................................................................................... 5
INSTALLATION ....................................................................................................................... 7
OPERATION ........................................................................................................................... 8
INITIAL SETUP ....................................................................................................................... 9
DRIVE SMARTER®APP CONNECTION ................................................................................. 9
CONNECTION INSTRUCTIONS............................................................................................. 9
REAL-TIME DRIVER ALERTS................................................................................................. 9
HEADS-UP NAVIGATION ..................................................................................................... 10
VIDEO SCREEN.................................................................................................................... 10
STATUS BAR ICONS ............................................................................................................ 11
VIDEO SETTINGS................................................................................................................. 12
VIDEO AND PHOTO PLAYBACK MODE.............................................................................. 12
VOICE ANNOUNCEMENTS ................................................................................................. 12
MEMORY CARD STORAGE................................................................................................. 13
SAFETY FEATURES ............................................................................................................. 14
GENERAL SETTINGS........................................................................................................... 16
FIRMWARE UPDATES.......................................................................................................... 20
SPECIFICATIONS ................................................................................................................. 21
TROUBLESHOOTING .......................................................................................................... 22
FAQ....................................................................................................................................... 22
TRADEMARKS ACKNOWLEDGEMENT, WARNINGS,
and REGULATORY INFORMATION...................................................................................... 23
LIMITED 1-YEAR WARRANTY ............................................................................................. 24
Contents
2

Introduction Introduction
Congratulations! You made the smart choice by purchasing an SC Series Dash Cam from Cobra.
SC Series cameras provide peace of mind by continuously recording the road in crystal-clear video.
With cutting edge features, phenomenal video quality, and an industry-leading focus on user experience,
SC Dash Cams are the best solution to record your ride. This Owner’s Manual covers the SC 201.
SC 201 SMART DASH CAM FEATURES
•Front and Cabin-View
1080P Full HD Video Resolution for Both Views
• Enhanced Night Vision
Crystal-Clear Video of Your Cabin, Day or Night
• Heads-Up Navigation
Plan Routes & Easily View Upcoming Turns
• Real-Time Driver Alerts
Get Red Light & Speed Camera and Other Alerts
• Dual-Band Wi-Fi
Flawless Connectivity with 2.4 and 5Ghz Support
• Embedded GPS
Location and Speed Information
• 2” Display
View One or Both Camera Views on Screen
• 140° Field of View
• Includes 16GB MicroSD Card
Display Interface Supports the Following Languages:
- English
- Spanish
- French
- German
PRODUCT SERVICE AND SUPPORT
For any questions about operating or installing this new Cobra product, PLEASE CONTACT COBRA
FIRST…do not return this product to the retail store. The contact information for Cobra will vary depend-
ing on the country in which you purchased and utilize the product. For the latest contact information,
please go to www.cobra.com/support.
WHAT’S IN THE BOX
• SC 201 Smart Dash Cam
• 16GB MicroSD Card
• Adhesive Mount
• Vehicle Power Charger
• Micro USB Data Cable
• Quick Start Guide
OPTIONAL ACCESSORIES – available at www.cobra.com
• Hardwire Kit: CA-MICROUSB-003 – Wires your dash cam directly into the fuse box for a quick and
clean installation without any dangling wires.
3 4

Introduction Installation
HARDWARE INTERFACE
5
Adhesive Mount
Connector
MicroSD Card Slot
Power Button
Micro USB Port
Adhesive Mount
Connector
MicroSD Card Slot
Power Button
Micro USB Port
TOP VIEW
BOTTOM VIEW
DISPLAY

POWERING ON THE DEVICE
The device will power on automatically when plugged in and can also be powered by PRESSING AND
HOLDING the Multifunction button until the display activates (when connected to power).
LOOP RECORDINGS
Once the MicroSD card is full, the camera will continuously overwrite the oldest footage recorded with
recent recordings. To protect a clip so that it will not be overwritten, press the Multifunction button so
that the clip is moved into the locked content partition.
EMERGENCY RECORDINGS
An Emergency Recording is triggered when the Multifunction button is pressed or when the G-Sensor
registers a significant impact (hard braking or collision). Emergency Recordings create locked files
that are not overwritten by Continuous Loop Recording. To ensure that important footage is not lost
surrounding an incident, the prior video clip is locked if the incident happens within 30 seconds of the
beginning or end of a clip.
THE MicroSD MEMORY CARD
The device comes with a MicroSD memory card. To remove the MicroSD card, press firmly on the
MicroSD card to push it further into the slot. There will be a click and the MicroSD card will pop out on
release. Extract the card and replace as necessary by inserting a card into the slot and pressing until it
locks in place. This camera is compatible with MicroSD cards up to 128GB. Please be sure to format the
card in-camera before use. Class 10 high-endurance cards from reputable brands are recommended for
constant video recording of a dash camera.
NAVIGATING MENUS
When in a menu, press or to navigate to the menu item you want to select or change and then
press to select or change the option associated with that item. Pressing at any time will exit the
menu without saving changes.
VOLUME ADJUST
Models with LCD displays allow the user to select “Volume” in the setting menu to and adjust volume of
notifications and voice announcements. Both products with LCD displays and without allow for volume
adjustment using the Drive Smarter App.
Installation
7 8
MOUNT
To install the Adhesive Windshield Mount, slide the dash cam onto the mount. Remove protective
film from camera lens and display. Find the spot on your windshield where you would like to mount the
camera and confirm the placement. Reminder, this is an adhesive mount, so it is important to mount
correctly the first time. Next, peel the plastic film off the 3M adhesive and press the mount FIRMLY onto
the windshield.
POWER
Plug one end of the supplied 12V Vehicle Power Adapter into your vehicle’s cigarette lighter, and the
other end into the micro USB port. The unit will automatically turn on and start recording. To manually
power on the device PRESS AND HOLD the Power button until the display activates.
Note: A Hardwire Kit is available at www.cobra.com for a more permanent installation that allows for
discrete routing of the power cable and recording while your vehicle is off.
DRIVE!
Your dash cam is designed for easy operation. After powering the camera will instantly begin loop
recording. When the MicroSD Card is full the oldest footage will be deleted to make way for the new. If
you witness something that you do not want deleted simply press the Emergency Record button and it
will be saved.
Operation

Operation
9 10
Operation
INITIAL SETUP
When first powered on, the device will show you the video stream and automatically begin loop recording.
When the dash cam is first turned on, we recommend to pair with the Drive Smarter App to
download the latest firmware and ensure your camera contains the latest bug-fixes. Please follow
the directions below to pair the app with the camera.
DRIVE SMARTER®APP CONNECTION
Your dash cam uses a Bluetooth®connection to the Drive Smarter app. Smartphone integration
allows for:
• Cloud Video Management: Viewing your camera’s footage from the phone without having to
connect the camera or MicroSD card to a computer. From here you can download videos and
save them to your phone
• Live-View: Viewing a live-stream into the camera when within proximity of the camera’s Wi-Fi
network.
• Mayday Notification: Drive Smarter’s Mayday Notification feature allows you to create an
emergency contact and auto-upload your location and send a text message or email to your
contact when the camera’s G-Sensor detects a severe impact/collision.
• Over-The-Air Firmware Updates: Have the latest features and bug-fixes loaded to your camera
via the mobile application.
CONNECTION INSTRUCTIONS
1. Start the Drive Smarter App and log in/create an account.
2. Follow the instructions in the Drive Smarter App to create a vehicle and connect the camera
3. When complete, a chime will sound on the camera and it will appear as Connected in the Drive
Smarter App.
REAL-TIME DRIVER ALERTS
Connecting to the Drive Smarter App enables your camera to receive real-time driver alerts about what is
on the road ahead including:
Red Light Camera Live Police Caution Area Speed Camera Speed Trap
HEADS-UP NAVIGATION
Connecting your camera to the Drive Smarter app will also enable you to receive Heads-Up Navigation
instructions on the camera display.
Simply connect your SC201 to Drive Smarter, find a route in the app, and drive using the camera
for guidance!
VIDEO SCREEN
The Video Screen is the home screen for the device. With the SC 201, based on settings, you can have
one view or two (picture-in-picture) views.
VIDEO SCREEN BASICS
When first powered on, the display will show you what the camera sees.
Note that the button functions are different depending on whether the unit is currently recording or not.
When first turned on or connected to power, the dash camera is in Loop Recording mode.
Loop recording must be stopped for the unit to enter the Settings Menu.
drivesmarter.com/downloads
Drive Smarter®
drivesmarter.com/downloads
Drive Smarter®

Operation Operation
11 12
STATUS BAR ICONS
AIndicates when camera is loop recording
Hazard icon appears in status bar if an Emergency Recording is in progress. The videos is being
locked.
BIndicates the recording time of the current clip
CIndicates resolution of current recording
DIndicates loop clip time (1 minute, 2 minutes, 3 minutes)
EIndicates whether the microphone is active or muted
FIndicates if Motion Detection is enabled
GIndicates that WiFi is enabled on the dash cam, WiFi connection is possible if paired with a phone
HRed icon indicates that GPS is on, but there is no satellite lock. Green GPS icon indicates that the
GPS has a satellite lock.
IIndicates that Bluetooth is enabled, Bluetooth connection is possible if paired with a phone
JIndicates that Parking Mode is enabled
VIDEO SETTINGS
Video Resolution:
This setting allows you to set the following resolutions on your SC 201. Higher resolutions will give you a
clearer image but take up more space on the memory card.
The available resolutions are:
• 1080P Full HD 1920x1080 30 Frames per Second
• 720P HD 1280x720 60 Frames per Second
• 720P HD 1280x720 30 Frames per Second
A B C D E F G H I J
VIDEO SETTINGS continued
Loop Clip Time:
This setting allows you to control the duration of each individual movie clip on the device. Video clips can
be set to durations of 1 minute, 2 minutes, or 3 minutes.
VIDEO AND PHOTO PLAYBACK MODE
This device stores video and pictures on its removable MicroSD Card. Playback mode will allow you
to review the saved video and photos and play back the video with sound. To select a video or photo
for playback navigate with the arrows and select with the OK key. The Back key will return you to the
previous screen.
Photos can be viewed and deleted. It is not necessary to lock photo files – they are not overwritten by
continuous loop recording.
VOICE ANNOUCEMENTS
Your camera can warn you when you are approaching red-light and speed-cameras, user-reported
police, radars detected in the area, accidents, and more from our community of users. When connected
to the Drive Smarter App, your camera can tell you what kind of threat you are approaching (For
example: “Police Spotted Ahead” or “Accident Ahead”) to help keep you safe on the road.

Operation Operation
13 14
MEMORY CARD STORAGE
LOOP RECORDINGS:
Once the MicroSD card is full, the camera will continuously overwrite the oldest footage recorded with
recent recordings. To protect a clip so that it will not be overwritten, press the Emergency Record/
Favorites Button so that the clip is moved into the locked content partition.
EMERGENCY RECORDINGS:
An Emergency Recording is triggered when the Emergency Record/Favorites Button is pressed
or when the G-Sensor registers a significant impact (hard braking or collision). Emergency Recordings
create locked files that are not overwritten by Continuous Loop Recording. To ensure that important
footage is not lost surrounding an incident, the adjacent clip is locked if the incident happens within 30
seconds of the beginning or end of a clip.
PHOTOS:
Photos are automatically saved in the Locked partition of the MicroSD card.
You may be occasionally asked to “Format the MicroSD Card” by the camera. This will
delete all MicroSD card content and to help the memory card continue operating properly.
Please save all important footage by downloading via the Drive Smarter app or by
manually uploading to your PC before doing this.
NORMAL EVENTS FAVORITES PHOTOS
66% Loop Recording 34% Locked Content
SAFETY FEATURES
The SC Series Dash Cams come with several safety features designed to protect you and your vehicle.
You can adjust the level of protection that fits you via camera and Drive Smarter App settings.
G-Sensor Impact Detection:
Your dash cam includes a built in G-Sensor which allows the device to determine when the car has been
in a collision. If it detects a collision, it automatically locks the recording being made at the time of the
accident. Additionally, if the event occurs within 30 seconds of the start or end of a clip, the adjacent
recording will also be locked so you always have at least 30 seconds saved from before and after the
event. You can use this setting to set the sensitivity of the G-Sensor from 1-3 or turn it off. Level 1 is
the easiest to activate the G-sensor. Level 3 will only lock videos when the most severe impacts are
detected. Locked videos created as a result of a G-sensor impact detection are stored in the Events
folder on the MicroSD card.
Parking Mode & Motion Detection:
Parking Mode uses the Motion Sensor and G-Sensor to monitor while your vehicle is parked. The idea
is that when you are parked, the dash cam will be “sleeping”, but it will monitor surroundings for motion
along with G-Sensor impacts. If it detects motion or if it detects an impact, then the unit will wake up
and start recording.
The camera will enter parking mode after 5 minutes. If there is no motion is during this period, the
display will turn off and the recording will stop (the camera monitors for g-sensor impacts or motion).
If motion is detected or if a G-sensor impact above Level 1 is triggered, the unit will wake up and start
saving 1 minute clips for as long as activity is being detected.
Notes:
• Parking Mode only works properly if the dash cam is powered. Either the Cigarette Lighter Socket
must remain on with the ignition off, or the dash cam must be hardwired to a constant power
source (please check www.cobra.com for available accessories).
• If you park where there is lots of activity which keeps triggering the motion sensor, then the
unit might never time out and enter the sleep state. For this you can use the “Auto Surveillance
Shutoff” setting to prevent unnecessary recording.
If leaving your vehicle off for more than 48 hours (or less if your battery is old) please use the “Auto
Surveillance Shutoff” setting to set a time-limit on Parking Mode and prevent your battery from
being drained.
• You can choose to have your camera monitor for impacts and/or motion by controlling the
‘Parking Mode’ and ‘Motion Detection’ settings separately.

OperationOperation
15 16
SAFETY FEATURES continued
Lane Departure Warning
The Lane Departure Warning System (LDWS) provides audible and visual warnings as you approach
a lane boundary. It will indicate whether you are departing the lane to the left or to the right. Note that
this feature relies solely on analyzing video of the road ahead and, therefore, works best on clearly
marked roads with good visibility. This feature is for informational purposes only. See the Trademark
Acknowledgement, Warnings, and Regulatory Information section below for the full legal disclaimer for
using this feature.
Forward Collision Warning
The Frontal Collision Warning System (FCWS) provides audible and visual warnings if you are quickly
approaching an obstacle in the road ahead. Note that this feature relies solely on analyzing video of the
road ahead and therefore works best with good visibility. This feature is for information purposes only.
See the Trademark Acknowledgement, Warnings, and Regulatory Information section below for the full
legal disclaimer for using this feature.
Speed Alert
The Speed Alert system uses the GPS included in your camera to monitor your speed. In the ADAS
Settings menu, you can set a speed limit for yourself. If the camera detects that you are driving faster
than your pre-set speed limit, it will alert you with an audible tone and by flashing the alert on the camera
display.
GENERAL SETTINGS
Video Resolution:
Allows you to select the desired video resolution for loop recordings and emergency videos. Smaller (1 min)
files are easier to transfer to your phone and share.
Loop Clip Time:
Loop recordings and emergency videos can be saved in 1 min, 2 min, or 3 min clips depending on your
preference. Smaller (1 min) files are easier to transfer to your phone and share.
Wi-Fi:
Allows enabling/disabling WiFi connection on the device and viewing the camera’s WiFi name and password.
GPS:
GPS can be disabled if needed. Enabling this setting allows your recordings to have an exact GPS location
stamped on the footage. This also always allows you to know the location of your vehicle if the camera is
wired via a hardwire kit and connected to a WiFi hotspot is installed in the car.
Bluetooth®:
Allows you to disable Bluetooth if needed. Bluetooth is enabled by default. Note: The camera will not be
able to connect to the Drive Smarter App if Bluetooth is disabled.
Display:
Setting allows you to choose the feeds that are displayed on the screen while the camera is powered.
Choose Front view, cabin view, or Picture in Picture (Front View and Cabin View).
Date / Time:
• Enable “Automatic” mode to have date / time settings based on the camera’s GPS signal. Having
the correct date and time ensures that timestamps associated with your videos are accurate. In
this mode, you will still have to ensure that you have picked the correct “Time Zone” and enabled
or disabled “Daylight Savings” based on your location.
• To manually set the date and time, cursor down to “Manual”, and select it. You will now be able to
enter Date and Time information.
Voice Commands:
Voice Commands can be toggled on/off in this setting.
Microphone:
The microphone can be enabled or disabled via settings or on the main screen. When disabled your
recorded videos will be silent.

Operation
Motion Detection:
Enabling Motion Detection allows your camera to monitor movement around the camera (changes in light)
which can be used to record any suspicious activity around the vehicle when parked. This setting screen
allows you to choose which of the available cameras should be used to monitor for activity. If leaving your
vehicle off for more than 48 hours (or less if your battery is old) please use the “Auto Surveillance Shutoff”
setting to set a time-limit on Motion Detection and prevent your battery from being drained.
Note: For Motion Detection to work the camera needs to be connected via hardwire kit (part: CA-
MICROUSB-003) or be plugged into an ‘always on’ Cigarette Lighter Socket. You can check if your vehicle
has an ‘always on’ CLA adapter online or in the vehicle’s owner’s manual.
Parking Mode:
Enabling Parking Mode allows your camera to monitor for changes in its internal G-Sensor/
accelerometer. Bumps, Collisions, and break-ins can trigger the G-Sensor to save valuable footage from
the moment of impact. If leaving your vehicle off for more than 48 hours (or less if your battery is old)
please use the “Auto Surveillance Shutoff” setting to set a time-limit on Motion Detection and prevent
your battery from being drained.
Note: For Parking Mode to work the camera needs to be connected via hardwire kit (part: CA-
MICROUSB-003) or be plugged into an ‘always on’ Cigarette Lighter Socket. You can check if your vehicle
has an ‘always on’ CLA adapter online or in the vehicle’s owner’s manual.
Surveillance Auto Shutoff:
If leaving your vehicle off for more than 48 hours (or less if your battery is old) please use the “Auto
Surveillance Shutoff” setting to set a time-limit on Motion Detection and Parking Mode to prevent your
battery from being drained.
G-Sensor:
You can use this setting to set the sensitivity of the G-Sensor from 1-3 or turn it off. Level 1 is the easiest to
activate the G-sensor. Level 3 is the setting which will only lock videos when the most severe impacts are
detected. Level 1 is recommended for most users.
Watermark (Date/Time, Speed, GPS, Driver ID Video Stamp
The watermark settings allow you to toggle having the date/time, speed, GPS coordinates, the Cobra logo
and a custom Driver ID be stamped into the bottom of all recorded video.
Driver ID Watermark:
This setting allows you to associate a Driver ID with the camera (for example: John, Employee 12, etc). This
allows you to set the name of the driver which will be stamped on the footage as part of the watermark.
Exposure:
Allows you to adjust how light or dark videos and images will appear on the camera.
Operation
17 18
Button Beep:
Turns the sound on or off for button presses. Note: this only affects normal button presses. Error
messages or Voice Announcements are not affected by this setting.
Screen Saver:
Allows you to set a duration after which the device’s display turn off with the camera still recording. This
setting is useful to avoid distracted driving and having a bright LED screen when driving at night.
Interior Night Vision:
The interior camera’s infrared LEDs allow for clear recording at night. You can set this to be always on, off,
or select Auto to allow the camera to detect low-light conditions and automatically enable Interior Night
Vision recording.
Language:
This setting allows you to pick the on-screen language for the camera unit. Driver Assistance (ADAS):
ADAS features allow you to receive warnings when you are in danger of colliding with an object in front of
you (Forward Collision Warning), drifting out of your lane (Lane Departure Warning), and Speeding beyond a
limit you can pre-set for yourself (Speed Alert). You can toggle each of these alerts on/off within this menu.
To use ADAS features, please ensure that the camera’s vision system is properly calibrated, and that the
dash camera is properly oriented relative to the road ahead.
To Calibrate:
Cursor over the “Calibration” item and press “OK” to select.
For a properly mounted dash camera,
• The vertical line would appear to divide the windshield into equal parts.
• The horizontal line would align with the front edge of your vehicle’s hood if your hood is visible.
Real-Time Driver Alerts:
This setting allows the user to program real-time driver alerts acquired from the Drive Smarter network.
Here you can choose to have the camera make a voice announcement when there is a red-light camera
or speed-camera ahead, or to simply display the warning on the LCD display. You can also choose to turn
notifications from the unit off completely and simply follow along using the Drive Smarter App.
Drive Smarter Services:
These settings allow you to select which videos you would like auto-uploaded to the Drive Smarter App
for sharing/review. You can also choose to have Incident Reports sent to your insurance provider, as well
as Mayday alerts sent to your Emergency Contact if a severe G-Sensor event is detected. Certain devices
which support Heads-Up Navigation also allow you to turn this feature on and off here.
Speed Units
Choose between miles/hour or kilometers/hour as the speed unit stamped in the watermark.

Operation Firmware Updates
Ensure the camera is connected to a constant power source during the update process. Failure to
do so could result in your unit becoming non-functional. Your vehicles cigarette lighter socket or a
household outlet work best.
Using the Drive Smarter App
• View the current firmware version under the About menu item on the dash cam:
- Stop loop recording
- Press the MENU button, cursor down to the ABOUT item
- Note the firmware version shown on the screen
• Power up your camera by connecting to constant power source such as your vehicles CLA
adapter or a household outlet.
• When you Connect your camera, the app will check if a newer firmware update is available on the
server.
• Press ‘Download’ on the notification to download the latest Firmware.
• Follow the instructions on the Drive Smarter Mobile Application. If successful, the camera’s LED’s
will begin blinking while the firmware is being installed.
• To check that the Firmware update was successful, you can check the ‘About’ screen in your
camera’s settings menu.
Using a Mac or PC
For optimal performance, check www.drivesmarter.com periodically for software updates.
• View the current firmware version under the About menu item on the dash cam:
- Stop loop recording
- Press the MENU button, cursor down to the ABOUT item
- Note the firmware version shown on the screen
• Connect the dash cam to your computer using the included USB to Micro-USB cable.
• Power on the dash cam and select Connect to Computer using the record/select button.
• The camera will be listed in Windows Explorer/Finder.
• Download the update file from www.drivesmarter.com and save it to your computer. It will end with
“.bin” as the file extension. Note: You do not need to double click or open this file on the computer.
• Copy/paste or drag the update file you downloaded .bin file into the root directory of the Camera’s
MicroSD Card.
• Wait for the file to transfer and then safely disconnect the dash cam from the computer. The dash
cam will turn off.
• Plug the Micro USB cord into a reliable power source such as your home’s outlet or your vehicle’s
CLA adapter. The dash cam will turn on and automatically boot into the Firmware Update Menu.
• Follow the directions on the camera display to update firmware if the unit has one. Units without
displays will update automatically.
• You can check if your camera is up to date by checking the firmware in your camera’s ‘About’
setting submenu in the camera or via the app.
19 20
Volume:
Allows you to raise and lower the volume of notifications and button beeps from your camera.
WDR:
Enabling Wide Dynamic Range allows your camera to accurately capture footage in very bright conditions.
Enabling this feature is recommended for most recording conditions.
GPS Format:
Choose between Decimals and Degrees as the GPS format that is stamped in the watermark.
Frequency:
Choose between 50Hz and 60Hz as your operating frequency if you are experiencing flickering in your video.
Format Reminder:
Choose the recurrence at which you are reminded to format the MicroSD card. Formatting the MicroSD
card frequently ensures your videos are protected and the MicroSD card is saving content properly.
Delete Videos Reminder:
Set this to be periodically reminded to free up locked video content so that the camera does not run out of
“Emergency Recordings” and “Favorites” space.
Restore Defaults:
Resets the device to factory settings. Note: restoring defaults will NOT erase data on your memory card.
Format MicroSD Card:
Allows you to format the inserted MicroSD Card. NOTE: This action will permanently delete all data on the
card. It is recommended to format any new card and periodically format existing cards.
About
You can use this setting to view your cameras electronic serial number including FCC ID number and
Industry Canada number. You can also view the manufacture part number and firmware version.

Camera Specications Troubleshooting
If your unit does not appear to be operating properly, please follow these troubleshooting steps:
• Make sure the power cord is properly connected.
• Make sure the socket of your vehicle’s cigarette lighter is clean and free of corrosion.
• Make sure the power cord’s cigarette lighter adapter is firmly seated in your cigarette lighter.
• Make sure you have downloaded the latest firmware to your unit.
FAQ
• Where do I mount/position my dash camera on the windshield?
a. Power on your dash cam so you can see the camera’s view while mounting. We recommend
centering your camera and mounting under the rear-view mirror. If your unit has a display, you can
use the camera’s “Calibrate” feature found in the ADAS menu to line up your view. SC100 users can
use the Drive Smarter app to get a live-view of what the camera is seeing to help with mounting.
• What is the largest MicroSD card size I can use in my camera?
a. We recommend using a minimum Class 10 or U1 card from a reputable vendor up to the
following sizes.
Model SC 100 SC 201 SC 200 SC 200D SC 400 SC 400D
Max MicroSD Card Size 128GB 256GB 256GB 256GB 256GB 256GB
Important: When using a MicroSD card for the first time please format the card in the camera by using
the camera menu or the Drive Smarter app.
• Why is my unit not powering up?
a. Please ensure your unit is properly connected. If you have turned the unit off, press and hold the
power button to turn on again.
If you are using Parking Mode and Motion Detection Mode with a
hardwire kit, the unit might not “wake up” when you enter your vehicle. Simply begin driving and
when your unit detects this it will wake up and begin recording.
• Why do recordings of the cabin/vehicle’s interior appear black and white?
a. This is normal operation of the Infrared LED night-vision camera. Infrared recording allows the
camera to accurately record your vehicle’s cabin in low-light conditions. You can turn Infrared
recordings off in the settings menu.
• How do I use Parking Mode and Motion Detection?
a. Parking Mode and Motion Detection can be turned on in the camera’s settings. These two features
will monitor your vehicle automatically when the unit is connected directly to the car’s vehicle via
hardwire kit (check for availability at www.cobra.com).
Note: When the car is parked your unit will go into a low-power “standby”/sleeping state where it monitors
for activity. The unit will automatically wake up when it detects significant motion or driving.
• Why is my unit not getting a GPS Lock (GPS icon is red)?
a. The GPS inside the device locks in with the satellite best when you are on the road. You may not
be able to get a GPS lock while in your garage, parking structures, or if testing the camera in your
home.
Features / Models SC 100 SC 201 SC 200* SC 200D* SC 400* SC 400D*
Video Resolution Full HD (1080P) Full HD (1080P)
Front & Cabin
QHD+ (1600P)
QHD+ (1600P) Front Only
Full HD (1080P) Front & Rear
UHD (4K)
UHD (4K) Front Only, UHD (4K)
Front + Full HD (1080P) Rear
Camera Views Front or Rear Front & Cabin Configurable Accessory
Cams* Front & Rear Cam Included Configurable Accessory Cams* Front & Rear Cam Included
Field of View 140° 140° Front/120° Cabin 140° 140° Front/120°
Rear and Cabin 140° 140° Front/120° Rear and Cabin
Display — 2” LCD 3” LCD 3” LCD 3” Touchscreen 3” Touchscreen
SD Card Included 8 GB 16 GB 8 GB 16 GB 16 GB 32 GB
Bluetooth®Connectivity X X
Dual Band Wi-Fi XXXXXX
Built-In GPS X X X X
Embeds Time and Location on Video X X X X X X
Heads-Up Navigation & Trip Planning — — — — —
Real-Time Driver Alerts with the Drive Smarter®App — X — — — —
Emergency Mayday Alert X X
Incident Reports
Parking Mode X X
Extreme Temperature Protection
Cloud Video Management X X
Advanced Driver Assistance Systems (ADAS) — – X X — —
Hands-Free Voice Commands — —
Accessory Camera Compatible — — X X X X
Alexa Built-In — — — — X X
3-Camera Capable — — — —
* Configurable Accessory Cams include Rear-View & In-Cabin Cameras available for SC 200, SC 200D, SC 400 and SC 400D
SC 100
SC SERIES SMART DASH CAMS
21 22

Trademarks Acknowledgment, Warnings, and
Regulatory Information
©2021 Cobra Electronics Corporation. Cobra and the snake design are proprietary trademarks of Cobra
Electronics Corporation, USA. Other trademarks and trade names are those of their respective owners.
Cobra Electronics Corporation™ is a trademark of Cobra Electronics Corporation, USA.
The Driver Awareness Alert display feature is subject to US Patent Numbers 8,842,004 and 8,970,422 and
additional pending US Patent Applications.
Warning! The forward collision warning system (FCWS) feature, when available and turned on, is for limited
informational purposes only. The FCWS does NOT replace a driver’s responsibility to use safe driving
judgment, comply with all traffic regulations and observe all road and driving conditions at all times. The
FCWS uses the camera to provide a warning of upcoming vehicles [and large objects] and, as a result,
may have reduced or no functionality in low visibility or certain weather conditions.
Driver is responsible for the safe operation and control of the vehicle. Do not substitute your driving
judgment with the information provided by this feature. Escort disclaims liability for injuries, damages, or
death arising from use of this feature.
Warning ! The Lane Departure Warning System (LDWS) feature, when turned on, is for limited
informational purposes only. The LDWS does NOT replace a driver’s responsibility to use safe driving
judgment, comply with all traffic regulations and observe all road and driving conditions at all times. The
LDWS uses the camera to provide a determine if the vehicle is drifting toward or departing from designated
lane markings and, as a result, may have limited functionality in low visibility or certain weather conditions
or when driving on unmarked or poorly marked roads.
Driver is responsible for the safe operation and control of the vehicle. Do not substitute your driving
judgment with the information provided by this feature. Escort disclaims liability for injuries, damages, or
death arising from use of this feature.
NOTE: This device complies with part 15 of FCC rules: Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received including interference that may cause undesired operation.
CAUTION: Modifications or parts not approved by Escort Electronics Corporation may violate FCC Rules
and void authority to operate this equipment. This device complies with RSS-310 of Industry Canada.
Operation is subject to the condition that this device does not cause harmful interference.
CAN ICES-3B/NMB-3B.
DISPOSAL OF ELECTRONICS EQUIPMENT: This product may contain hazardous substances that
could impact health and the environment if not disposed of properly.
The crossed out wheeled bin symbol indicates that the product should not be disposed of along
with household waste. It should be handed over to an applicable collection point for the recycling
of electrical equipment. By ensuring that this product is disposed of correctly you will help/prevent
potential negative impact on the environment.
If you need more information on the collection, reuse and recycling systems, please contact your local
civic office or the shop where it was originally purchased.
23 24
Limited 1-YearWarranty
Warranty Terms:
Cobra warrants your product against all defects in materials and workmanship for a period of one (1)
year from the date of original purchase.
Cobra, at our sole discretion, will repair or replace your product (with the same or comparable
product) free of charge.
Cobra will not pay shipping charges that you incur for sending your product to us. Products received
COD will be refused.
To make a warranty claim, we will require proof or purchase in the form of an invoice or receipt. No
proof of purchase is required for factory direct purchases.
Warranty Exclusions: Warranty does not apply to your product under any of the following
conditions: 1. The serial number has been removed or modied. 2. Your product has been subjected
to misuse or damage (including water damage, physical abuse, and/or improper installation). 3. Your
product has been modied in any way. 4. Your receipt or proof-of-purchase is from a non-authorized
dealer or internet auction site including E-bay, U-bid, or other non-authorized resellers.
LIMITATION OF WARRANTY: EXCEPT AS EXPRESSLY PROVIDED HEREIN, YOU ARE
ACQUIRING THE PRODUCT “AS IS” AND “WHERE IS”, WITHOUT REPRESENTATION OR
WARRANTY. COBRA SPECIFICALLY DISCLAIMS ANY REPRESENTATION OR WARRANTY
INCLUDING, BUT NOT LIMITED TO THOSE CONCERNING THE MERCHANTABILITY AND
SUITABILITY OF THE PRODUCT FOR A PARTICULAR PURPOSE. COBRA SHALL NOT BE
LIABLE FOR CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT
LIMITATION, DAMAGES ARISING OUT OF THE USE, MISUSE OR MOUNTING OF THE
PRODUCT.
The above limitations or exclusions shall be limited to the extent they violate the laws of any
particular state. Cobra is not responsible for products lost in shipment between the owner and our
service center.
General Warranty Information
Each product we manufacture is covered by our factory warranty. While each product may have
unique components and policy, the general guideline below will apply to most Cobra products.
All Cobra products purchased factory-direct or from our Authorized Resellers will come with a full
one to three (1-3) year warranty from the date of the original retail purchase (see policy statement
above for full warranty details and exclusions).
Standard accessories packaged with each model will have a one-year factory warranty.
Accessory items have a one-year factory warranty.
Shipping to our facility is not covered in our warranty. Return shipping is included within the US.
This warranty is non-transferrable.
For the sake of clarity, ‘repair or replace the Product or its defective part’ does not include removal
or installation work, costs or expenses which include but are not limited to labor costs or expenses.
Cobra will not be responsible for lost packages.