iRADAR should appear under
Devices.
Note: Your iPhone/iPod touch
may take 30 seconds to 1
minute to recognize the device.
It will initially appear as
“Headset” and will then
turn into iRADAR.
If you cannot see the device, try restarting
both iRadar and your iPhone/iPod touch and
re-do steps 1 through 5.
Press iRADAR, then
press Pair.
The LED on the detector unit will flash blue.
When pairing has been
completed, it will turn
solid blue.
Bluetooth Pairing Tips
If you are having trouble initializing or
maintaining your Bluetooth connection take
the following steps:
1) Turn off your Cobra iRadar detector device,
wait 30 seconds, and then turn it back on.
On your iPhone/iPod Touch, turn Bluetooth
Off and then On again.
2) If you are still not connected, go to the
Bluetooth Settings menu on your iPhone/
iPod Touch. Press the button to the
right of iRADAR and then press “Forget
this Device”. Wait approximately 30
seconds for iRADAR to appear under
Devices and then press iRADAR to
reinitialize pairing.
Cobra iRadar App
Dashboard
Display speedometer,
compass and car
battery voltage.
View Map
View user-marked locations,
red light camera locations
in your area and GPS-based
speed & direction of travel.
Settings
Configure your Cobra
iRadar settings.
Note: All radar/laser/red light
camera detector settings will
be inactive if you are not
paired with Cobra iRadar or
are out of range.
To download the App, enter the App Store on
your iPhone/iPod touch and search for “Cobra
iRadar” and follow the onscreen instructions.
Now open the App and
enjoy using iRadar! For more detailed information
on iRadar App features, view
the tutorial; which can be
found at the bottom of the
map legend page.
For more information on iRadar accessories,
go to: www.cobrairadar.com.
3) If iRADAR does not appear under Devices or
you experience an intermittent Bluetooth con-
nection, completely turn off both your iPhone/
iPod Touch and iRadar detector unit, wait 30
seconds, and then turn them back on.
4) If iRADAR still does not appear, switch the
unit into Android mode and then back to
iOS mode.
