CobraCo FB-6200 User manual

Model FB-6200 Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS
Please read and follow ALL instructions before assembling
or using this product.
•ALWAYS use MESH COVER when
fire is lit.
•NOT FOR USE BY CHILDREN.
•The FIRE TUB is HOT! DO NOT TOUCH
or allow children near FIRE TUB while it is in use.
•DO NOT use on wood deck or any other flammable surface.
•DO NOT use in the vicinity of flammable objects or indoors.
•Screen Handle will be HOT when in use. Use a heat-proof
barbeque mitt or poker tool to grasp handle.
•Approved items for burning: wood, self-starting fire logs,
paper & charcoal.
•Bowl will not warp from heat, but you may place sand in the
bottom, if desired.
•DO NOT put on VINYL COVER until FIRE TUB is completely cooled & embers
extinguished.
Cast Iron Fire Pit with Screen &
Vinyl Cover
WARNING! CARBON MONOXIDE HAZARD
Burning charcoal inside can kill you. It gives off carbon monoxide, which has
no odor. NEVER burn wood or charcoal inside homes, vehicles or tents.
Copyright © 2006, C obraCo Mfg., Inc. * Lake Zurich, IL 60047
FOR OUTDOOR USE ONLY! FOR OUTDOOR USE ONLY!

Parts Included*:
A. 1 Cast Iron Fire Bowl
B. 2 Side Mesh Panels-A
C. 2 Side Mesh Panels-B
D. 1 Top Mesh Panel
E. 4 eg Assemblies
F. 2 Top Rings-A
G. 2 Top Rings-B
H. 16 Screws
* Please check enclosed p arts shipped with the Fire
Tub. If an y part s ar e missing, do not return the item
to your retailer . Please contact us first for
replacement parts. Please use Email (for quickest
response) cu [e-mail] or call:
CobraCo® Manufacturing, Inc. at [phone] x37
(Customer Service)
ASSEMBLY INSTRUCTIONS
(Tools Required – Not Included: 1 Phillips Head Screwdriver & 1 Wrench)
1. Assemble Top Ring-A (F) and Top Ring-B (G) to the Leg Assemblies (E) with supplied
Screws (H).
2. Put the Cast Iron Fire Bowl (A) on the stand.
3. Assemble the Side Mesh Panel-A (B) to the right and left side of the Cast Iron Fire Bowl (A)
with supplied Screws (H).
4. Assemble the Top Mesh Panel (D) to the Side Mesh Panel-A (B) with supplied Screws (H).
5. Assemble the Side Mesh Panel-B (C) to the front and back side of the Cast Iron Bowl (A).
NOTE: Your FIRE TUB is made of cast metal, you may
find roughness on the surface and the design. This “one
of a kind” look enhances the beauty of the product and is
not a defect.
NOTE: Finish will never look the same after burning.
NOTE: Add at least 1” of sand to the bottom of the Fire
Tub. This will distribute the heat more evenly.
Copyright © 2006, C obraCo Mfg., Inc. * Lake Zurich, IL 60047
Made in China and/or Indi a
A
B
E
C
D
F,G