CobraCo FRSTAR-369 User manual

IMPORTANT SAFETY INSTRUCTIONS
Please read and follow all instructions before assembling or using this product.
36” FIRE RING
OWNER’S MANUAL
MODEL: FRSTAR-369
NOTE: Your fire tub is made of solid copper that is hammered to achieve an authentic rustic appearance.
This "one of a kind" look enhances the beauty of the product and is not a defect.
NOTE: Finish will not look the same after burning.
NOTE: Add at least 1 inch of sand to the bottom of the fire tub. This will distribute the heat more evenly.
• NOT FOR USE BY CHILDREN.
• The FIRE RING IS HOT! DO NOT TOUCH or allow
children near FIRE TUB while it is in use.
• DO NOT use on wood deck or any other flammable surface.
• DO NOT use in the vicinity of flammable objects or indoors.
• DO NOT USE on ot near combustibled and/or flammable
materials, including houses, buildings, trees and vehicles.
• NEVER LEAVE THIS PRODUCT UNATTENDED WHILE IN USE!
• Have fire-extiguishing materials nearby when using this
product.
• Always wear protective gloves when handling this product
to avoid injury from sharp edges and hot surfaces.
• Always use this product in well ventilated and open areas
to avoid carbon monoxide build-up that could result in
serious injury or death.
• Approved items for burning: wood, self-starting fire logs,
paper & charcoal.
WARNING! CARBON MONOXIDE HAZARD
Burning charcoal inside can kill you. It gives off carbon monoxide, which has no odor.
NEVER burn wood or charcoal inside homes, vehicles, or tents.
Copyright© 2011, CobraCo® Mfg., Inc.
Woodstream® Corporation
69 N. Locust Street Lititz, PA 17543, USA
FOR OUTDOOR USE ONLY! FOR OUTDOOR USE ONLY!
DO NOT use this unit on a wood deck or other
combustible surfaces such as dry grass,
leaves, mulch, etc. DO NOT use this near heat
sensitive or combustible structures such as
vinyl or wood siding.
CAUTION! Some parts may contain sharp
edges. Wear protective gloves as necessary.
Read and follow all Safety Statements,
Warnings, Assembly Instructions and Use &
Care Directions before attempting to
assemble unit.
DO NOT allow small children near flame. Hot
embers can fly out of the fire tub in windy
conditions. Adequate fire extinguishing
material should be readily available.

Made In China and/or India
Copyright© 2011, CobraCo® Mfg., Inc.
Woodstream® Corporation
69 N. Locust Street Lititz, PA 17543, USA
FRSTAR-369 36” FIRE RING
Assembly Instruction
1. Carefully remove the 4 quarter ring panels.
2. Set the pieces together to form a circle.
3. Attach each panel with 3 bolts and nuts to secure (see Diagram 1).
NOTE: THIS FIRE RING has been powder-coated and may discolor slightly during use due to high temperatures.
Parts Included:
A. Die-cut Metal Panels (4)
B. Bolts (12)
C. Nuts (12)
FINSIHED ASSEMBLED UNIT
Diagram 1