Coby CETW571 User manual

User Manual Manual de usuario
CETW571
EN
ES
...
...
01
12

EN 1
User Manual
S M L
1 2

EN 2
Overview
CETW571 True wireless stereo earbuds
Multi-Function Button (MFB)
Lid of Charging port
Ear tip Ear tip
Status LED Indicator
Charging
Tone notication
Steady red
Slowly ashing red
O󰀨, LED light is o󰀨
Earbuds
Low battery
Charging
Fully charged

EN 3
Press and hold the MFB (Multi-Function Button) on your
earbud for 2 seconds to power it on.
Press and hold the MFB (Multi-Function Button) on your
earbud for 5 seconds to power it o󰀨.
Powering on
Powering o󰀨
ON
O󰀨
Flashes blue three times and then alternately
ashes red and blue.
Flashes red three times and then be o󰀨.
Power on tone notication
Power o󰀨 tone notication
Powering on/o󰀨
Pairing
1. True Wireless stereo connection
When the Earbuds are turned on, it will automatically enter
True Wireless stereo pairing mode.
Alternately ashing
red and blue on both
earbuds
Enter True Wireless
stereo pairing mode

EN 4
Left earbud: slowly ashing blue
Right earbud: alternately ashing
red and blue
Connected tone notication
When True Wireless
Stereo connection is
successful (the right
earbud is connected
to the left earbud).
After a successful True Wireless stereo connection, your
CETW571 will automatically enter Bluetooth pairing mode with
your media device.
Turn on Bluetooth in your device’s settings and search for
“CETW571”, then tap “CETW571” to connect.
2. Bluetooth connection with your device
ON
Slowly ashing blue (both
earbuds)
The earbuds will automatically be paired with your last
sucessfully connected media device next time they are
turned on.
Connected to a device
(Successfully paired with
your media device).
Not connected to any
device
Both earbuds will auto-
matically shut down after 3
minutes
Connected tone noti-
cation

EN 5
Controls
Phone call mode
Music mode
Voice Assistant mode
Press the MFB three times on
the right earbud.
Press the MFB twice on either
earbud.
Press and hold the MFB for 1.5-2
second on either earbud.
Press and hold the MFB for 2
seconds on either earbud.
Press the MFB once on either
earbud.
Press the MFB once on either
earbud.
Press the MFB twice on the left
earbud.
Press the MFB twice on the right
earbud.
Press the MFB three times on
the left earbud.
Volume down
Answer/End
a call
Reject
a call
Exit
Activiate Siri
/other voice
assistant
Volume up
Play/Pause
Next track
Previous track L
L
R
R
X1
X1
X2
X2
X2
1.5-2’’
2’’
X3
X3

EN 6
Troubleshooting
Problem Solution
Your earbuds aren’t
connecting to each
other. The Earbud
LED Indicators on
both earbuds are
alternating between
red and blue lights.
Double press the Multi-Function
Button on either earbud to man-
ually initiate true wireless stereo
connection.Please allow up to
30 seconds to connect if you are
in a public area with interfering
signals.
Your earbuds are
connected to each
other, but you cannot
connect to my device
(phone, laptop, tablet
etc.)
Ensure the earbuds are not cur-
rently connected to another de-
vice. If they are, open Bluetooth
settings on those devices and tap
“Forget device” on “CETW571”.
Conrm the device you would like
to pair with is Bluetooth enabled,
please refer to that device’s user
manual to conrm.
There is no response
on the CETW571
earbuds.
Firstly, check whether the bat-
teries in earbuds are depleted, if
they are, charge the earbuds. If
they are not, reset the earbuds
by pressing and holding the
Multi-Function Button for about 8
seconds.
You can only hear
sound on one
earbud.
Reset the earbuds by pressing
and holding the Multi-Function
Button for about 8 seconds.
?

EN 7
Model Name CETW571
Power Input 5 V/1A
Charging time 2 hours
Playtime Up to 4 hours
Battery capacity 40mAh
Battery Type Rechargeable Lithium-ion
Range 10m / 33 ft
Bluetooth version V 5.0
Weight 11.6g
Specications
Specications are subject to change without notice.
I

Specications
Specications are subject to change without notice.
Safety Precautions
1. Avoid dropping.
2. Do not disassemble this device.
3. Do not expose this device to rain or moisture or submerge
in water.
4. Ideal temperatures are 0°C to 35°C. Avoid extreme
temperatures.
5. Keep the device away from excessive heat, such as sun-
shine, re or the like.
6. Do not use the device outdoors during thunderstorms.
7. Use original or certied cables.
8. Do not use any corrosive cleaner/oil to clean.
9. Keep out of reach of children. It contains small parts which may
be a choking hazard.
10. Observe local laws and regulations while using the device.
11. To prevent damage to your device’s parts or internal cir-
cuits, do not use it in dusty, smoky, damp or dirty environments.
12. Do not use, store or transport the device where ammables
or explosives are stored. Using your device in these environments
increases the risk of explosion or re.
EN 8
Hearing Safety
1. To avoid hearing damage, do not listen for extended periods
at high volume.
2. Do not turn the volume so high that you’re unable to hear
your surroundings.
3. Do not use earphones while driving.
4. You should use caution or temporarily discontinue use in po-
tentially hazardous situations.

EN 9
FCC Statement
FCC ID: 2AMSOCETW571
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including inter-
ference that may cause undesired operation.
Warning: Changes or modications not expressly approved by
the party responsible for compliance could void the user’s au-
thority to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment o󰀨 and
on, the user is encouraged to try to correct the interference by
one or more of the following measures: (1) Reorient or relocate
the receiving antenna. (2) Increase the separation between the
equipment and receiver. (3) Connect the equipment into an
outlet on a circuit di󰀨erent from that to which the receiver is
connected. (4) Consult the dealer or an experienced radio / TV
technician for help.
FCC Radiation Exposure Statement:

EN 10
Disclaimer
All information, design and specications contained in this
manual were correct at the time of this publication. As the
product goes under continuous upgrades and changes, how-
ever, the nal device may have slight di󰀨erences. The contents
of this manual are subject to change without prior notice, and
Coby will not be liable for any errors contained herein or for
incidental or consequential damages in connection with the
furnishing performance or use of this manual.
Notice
This symbol means the product must not be discarded as
household waste, and should be delivered to an appropri-
ate collection facility for recycling.
Follow local rules and never dispose of the product and
rechargeable batteries with normal household waste.
Correct disposal of old products and rechargeable batter-
ies helps prevent negative consequences for the environ-
ment and human health.
This product complies with the radio interference
requirements of the European Community.
The device has been evaluated to meet general RF exposure
requirement.
The device can be used in portable exposure condition without
restriction.
COBY COPYRIGHT 2022 ALL RIGHTS RESERVED.
COBY IS A REGISTERED TRADEMARK OF CBY HOLD-
INGS, LLC. MANUFACTURED BY SUMMIT ELECTRONICS
LLC. USED UNDER LICENSE. CBY HOLDINGS, LLC DOES
©

EN 11
The Bluetooth
®
word mark and logos are registered trademarks
owned by the Bluetooth SIG, Inc. and any use of such marks by
Fesco Distributors, Inc. is under license. Other trademarks and
trade names are those of their respective owners.
®
NOT MANUFACTURE THIS PRODUCT OR PROVIDE ANY
MANUFACTURER’S WARRANTY OR SUPPORT. THE
BLUETOOTH®WORD MARK AND LOGOS ARE REGIS-
TERED TRADEMARKS OWNED BY THE BLUETOOTH
SIG, INC. AND ANY USE OF SUCH MARKS BY SUMMIT
ELECTRONICS LLC IS UNDER LICENSE. OTHER TRADE-
MARKS AND TRADE NAMES ARE PROPERTY OF THEIR
RESPECTIVE OWNERS.
WARNING: CANCER AND REPRODUCTIVE HARM -
WWW. P65WARNINGS.CA.GOV.

ES 12
Visión general
Auriculares estéreo inalámbricos verdaderos
CETW571
Botón multifunción (MFB)
Tapa del puerto de carga
Punta de oído Punta de oído
Indicador LED de estado
Cargando
Noticación de tono
Rojo jo
Rojo parpadeando
lentamente
La luz LED está
apagada
Auriculares
Batería baja
Cargando
Completamente cargado

ES 13
Mantenga presionado el MFB (botón multifunción) en su
auricular durante 2 segundos para encenderlo.
Mantenga presionado el MFB (botón multifunción) en su
auricular durante 5 segundos para apagarlo.
Encendiendo
Apagando
EN
Apagado
Parpadea en azul tres veces
y luego alterna en rojo y azul.
Parpadea en rojo tres veces
y luego se apaga
Encendido
noticación de tono
Apagado
noticación de tono
Encendido / apagado

ES 14
Emparejamiento
1. Verdadera conexión estéreo inalámbrica
Cuando los auriculares están encendidos, entrarán au-
tomáticamente en el modo de emparejamiento estéreo True
Wireless.
Parpadeando alternativa-
mente en rojo y azul en
ambos auriculares
Auricular izquierdo: azul
parpadeando lentamente
Auricular derecho: rojo
y azul parpadeando
alternativamente
Noticación de tono
conectado
Ingrese True Wireless
modo de emparejamiento
estéreo
Cuando la conexión True
Wireless Stereo se realiza
correctamente (el auricular
derecho está conectado al
auricular izquierdo).

ES 15
Después de una conexión estéreo True Wireless exitosa, su
CETW571 ingresará automáticamente al modo de empareja-
miento Bluetooth con su dispositivo multimedia.
Encienda Bluetooth en la conguración de su dispositivo y
busque “CETW571”, luego toque “CETW571” para conectarse.
2. Conexión Bluetooth con su dispositivo
Azul parpadeando
lentamente (ambos
auriculares)
Los auriculares se emparejarán automáticamente con
su último dispositivo multimedia conectado correcta-
mente la próxima vez que se enciendan.
Conectado a un dispositivo
(Emparejado exitosamente
con su dispositivo multi-
media).
No conectado a ningún
dispositivo
Ambos auriculares se
apagarán automáticamente
después de 3 minutos.
Noticación de tono
conectado
ON

ES 16
Control S
Modo de llamada telefónica
Modo música
Modo asistente de voz
Presione el MFB tres veces en
el auricular derecho.
Presione el MFB dos veces en
auricular.
Mantenga pulsado el MFB duran-
te 1.5-2 segundo en cualquiera
de los auriculares.
Mantenga pulsado el MFB duran-
te 2 segundos en cualquiera de
los auriculares.
Presione el MFB una vez en
auricular.
Presione el MFB una vez en
auricular.
Presione el MFB dos veces a la
izquierda auricular.
Presione el MFB dos veces a la
derecha auricular.
Presione el MFB tres veces en
el auricular izquierdo.
Bajar volumen
Responder /
Finalizar
una llamada
Rechazar
una llamada
Salida
Activar Siri
/ otro asis-
tente de voz
Sube el
volumen
Reproducir
pausar
Siguiente
pista
Pista anterior L
L
R
R
X1
X1
X2
X2
X2
1.5-2’’
2’’
X3
X3

ES 17
Solución de problemas
Problema Solución
Tus auriculares no se
conectan entre sí. Los
indicadores LED de los
auriculares en ambos
auriculares alternan entre
luces rojas y azules.
Presione dos veces el botón multi-
función en cualquiera de los auriculares
para iniciar manualmente la verdadera
conexión estéreo inalámbrica. Espere
hasta 30 segundos para conectarse si
se encuentra en un área pública con
señales de interferencia.
Sus auriculares están
conectados entre sí, pero
no puede conectarse a mi
dispositivo (teléfono, com-
putadora portátil, tableta,
etc.)
Asegúrese de que los auriculares no
estén conectados actualmente a otro dis-
positivo. Si es así, abra la conguración
de Bluetooth en esos dispositivos y toque
“Olvidar dispositivo” en “CETW571”.
Conrma que el dispositivo con el que te
gustaría emparejar está habilitado para
Bluetooth; consulta el manual del usuario
de ese dispositivo para conrmar.
No hay respuesta en los
auriculares CETW571.
En primer lugar, compruebe si las bat-
erías de los auriculares están agotadas,
si lo están, cargue los auriculares. Si no
es así, reinicie los auriculares presionan-
do y manteniendo presionado el botón
multifunción durante aproximadamente
8 segundos.
Solo puede escuchar el
sonido en un auricular.
Restablezca los auriculares presionan-
do y manteniendo presionado el botón
multifunción durante aproximadamente
8 segundos.
?

ES 18
Nombre del modelo CETW571
Entrada de alimentación 5 V/1A
Tiempo de carga 2 hora
Tiempo de juego Hasta 4 horas
Capacidad de la batería 40mAh
Tipo de Batería Iones de litio recargables
Abarcar 10m/33 ft
Versión de bluetooth V 5.0
Peso 11.6g
Especicaciones
Las especicaciones están sujetas a cambios sin
previo aviso.
I

ES 19
Precauciones de seguridad
1. Evite las caídas.
2. No desmonte este dispositivo.
3. No exponga este dispositivo a la lluvia ni a la humedad ni lo
sumerja en agua.
4. Las temperaturas ideales son de 0 ° C a 35 ° C. Evite las
temperaturas extremas.
5. Mantenga el dispositivo alejado del calor excesivo, como la
luz solar, el fuego o similares.
6. No utilice el dispositivo al aire libre durante tormentas
eléctricas.
7. Utilice cables originales o certicados.
8. No utilice ningún limpiador / aceite corrosivo para limpiar.
9. Manténgase fuera del alcance de los niños. Contiene piezas
pequeñas que pueden representar un peligro de asxia.
10. Respete las leyes y normativas locales al utilizar el
dispositivo.
11. Para evitar daños a las partes o circuitos internos de su dispos-
itivo, no lo use en ambientes polvorientos, con humo, húmedos o
sucios.or explosives are stored. Using your device in these environ-
ments increases the risk of explosion or re.
12. No utilice, almacene ni transporte el dispositivo donde se alma-
cenen inamables o explosivos. El uso de su dispositivo en estos
entornos aumenta el riesgo de explosión o incendio.
Seguridad auditiva
1. Para evitar daños auditivos, no escuche durante períodos
prolongados a un volumen alto.
2. No suba el volumen tanto que no pueda oír lo que le rodea.
3. No utilice auriculares mientras conduce.