Coby CHBT835 User manual
User Manual
Overview
Adjustable headband
Next Track /
Volume up
Play / Pause /
Power on / o
Previous Track /
Volume down
Type-C charging port
AUX-In Jack
LED Indicator
Built-in microphone
EN 1
Charging
To charge, connect one end of the supplied USB-C charging cable to the
Type-C charging port of the headphone, and connect the other end to a
USB power source, such as your laptop's USB charging port.
EN 2
LED light turns o
Steady red
Charging
Fully charged
Press and hold the “Play/Pause/Power” button for 2 seconds to turn the
headphone on.
Powering on
ON
O
Alternating ashing blue and red
Flashing red three times
Power on tone notication
Power o tone notication
Powering on/o
Press and hold the “Play/Pause/Power” button for 6 seconds to turn the
headphone o.
Powering o
Bluetooth connection with your device
When the headphone is turned on, it will automatically enter Bluetooth
pairing mode with your media device.
Turn on Bluetooth in your device’s settings and search for “CHBT835”, then
tap “CHBT835” to connect.
EN 3
Alternating ashing red and blue
on the left earbud.
The headphones will automatically be paired with your last sucess-
fully connected media device next time it is turned on.
Pairing mode
Connected to a device
(Successfully paired with your
media device). Connected tone notication
ON
Slowly ash blue
Controls
Music mode
Press the “Next Track / Volume Up” button +V /
Press the “Play / Pause” button / once.
Press and hold the “Previous Track / Volume Down”
button /V-
Press and hold the “Next Track / Volume Up” button
+V /
Press the “Previous Track / Volume Down” button /V-
Volume down
Volume up
Play / Pause
Next track
Previous track
Phone call mode
Voice Assistant mode
Press and hold the “Play / Pause” button / for 2
seconds
Press and hold the “Play / Pause” button / for 2
seconds
Press the “Play / Pause” button / once.
Press the “Play / Pause” button / twice.
Answer/End
a call
Reject a call
Exit
Activiate Siri
/other voice
assistant
EN 4
Source Input Mode
AUX mode
To connect the headphones with your media device via aux cable, plug one
end of the aux cable into the aux port of the headphones, and the other end
into the aux port of your media device. Then you can stream any audio sound
from your media device to the headphones.
Notes:
· The user does not need to power on the headphones to use the aux mode.
· Once plugged in, the powered-on headphones will automatically power o.
· In AUX mode, the user can control the music only from the media device.
Source input device
EN 5
Model Name CHBT835
Power Input 5 V/1A
Charging time 1.5 hours
Playtime 8 hours
Battery Type Rechargeable Lithium-ion
Range 10m / 33 ft
Bluetooth version V 5.0
Specications
Specications are subject to change without notice.
I
Safety Precautions
1. Avoid dropping.
2. Do not disassemble this device.
3. Do not expose this device to rain or moisture or submerge in water.
4.
Ideal temperatures are 0°C to 35°C.
Avoid extreme temperatures.
5. Keep the device away from excessive heat, such as sunshine, re or
the like.
6. Do not use the device outdoors during thunderstorms.
7. Use original or certied cables.
8. Do not use any corrosive cleaner/oil to clean.
9. Keep out of reach of children. It contains small parts which may be a choking
hazard.
10. Observe local laws and regulations while using the device.
11.To prevent damage to your device’s parts or internal circuits, do not use
it in dusty, smoky, damp or dirty environments.
12. Do not use, store or transport the device where ammables or explosives
are stored. Using your device in these environments increases the risk of
explosion or re.
Safety Statement
Hearing Safety
1. To avoid hearing damage, do not listen for extended periods at high vol-
ume.
2. Do not turn the volume so high that you’re unable to hear your surround-
ings.
3. Do not use earphones while driving.
4. You should use caution or temporarily discontinue use in potentially haz-
ardous situations.
FCC Statement
FCC ID: 2AMSOCHBT835
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause un-
desired operation.
Warning: Changes or modications n ot e xpressly a pproved b y t he party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the separation be-
tween the equipment and receiver. (3) Connect the equipment into an outlet
on a circuit dierent from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio / TV technician for help.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
EN 6
COBY COPYRIGHT 2022 ALL RIGHTS RESERVED. COBY IS A
REGISTERED TRADEMARK OF CBY HOLDINGS, LLC. MANUFAC-
TURED BY SUMMIT ELECTRONICS LLC. USED UNDER LICENSE.
CBY HOLDINGS, LLC DOES NOT MANUFACTURE THIS PRODUCT OR
PROVIDE ANY MANUFACTURER’S WARRANTY OR SUPPORT. THE
BLUETOOTH®WORD MARK AND LOGOS ARE REGISTERED TRADE-
MARKS OWNED BY THE BLUETOOTH SIG, INC. AND ANY USE OF
SUCH MARKS BY SUMMIT ELECTRONICS LLC IS UNDER LICENSE.
OTHER TRADEMARKS AND TRADE NAMES ARE PROPERTY OF
THEIR RESPECTIVE OWNERS.
WARNING: CANCER AND REPRODUCTIVE HARM - WWW.
P65WARNINGS.CA.GOV.
Disclaimer
All information, design and specications contained in this manual were
correct at the time of this publication. As the product goes under continuous
upgrades and changes, however, the nal device may have slight dierenc-
es. The contents of this manual are subject to change without prior notice,
and Coby will not be liable for any errors contained herein or for incidental
or consequential damages in connection with the furnishing performance
or use of this manual.
EN 7
©
EN 8
SUMMIT ELECTRONICS LLC One Year Limited Warranty
WARRANTY SUMMIT ELECTRONICS LLC LIMITED WARRANTY (“Warranty”)
― For product Categories Listed in Chart Below (as applicable, “Product”)
Before returning your Product for service under this Warranty, please (i)
read the instruction manual carefully. If you are still having trouble with your
Product, please contact Technical Support at support@summitcegroup.
com.
Warning: Some Products may contain components that are small enough to
be swallowed. Please keep out of reach of children.
Subject to the terms and conditions herein, SUMMIT ELECTRONICS LLC
(hereinafter called “SUMMIT ELECTRONICS LLC”) warrants to the original
purchaser of the Product (“Customer”) that for the applicable Warranty Pe-
riod listed below, the Product will be free from defects in material or work-
manship under normal, non-commercial use (“Defects”).
Warranty Period encompasses, as listed below, separate “Coverage Periods”
for Parts and Labor, each Coverage Period for one year, to begin from the
original date of Customer purchase. If Customer returns a defective Product
(or any component thereof) during the applicable Warranty Period, SUM-
MITELECTRONICSLLC will, at its option, during the specied Coverage Pe-
riods for Parts and Labor (as applicable) either: (i) repair the Product (or, as
applicable, any component thereof) or (ii) replace the Product (or, as appli-
cable, any component thereof) with a new or refurbished Product (or, as ap-
plicable, any component thereof), in either case free of charge to Customer
for Parts and/ or Labor (as applicable) during the specied Coverage Period
only, and excluding applicable shipping charges (noted below), for which
the Customer is responsible. The foregoing states the Customer’s exclusive
remedy and SUMMIT ELECTRONICS LLC’s sole liability for breach of the lim-
ited warranty contained herein.
This Warranty specically excludes any Product (or, as applicable, any com-
ponent thereof) that has been subject to or Defects resulting from: (a) any
neglect or misuse by a Customer, an accident, improper application, viola-
tion of operating instructions for the product, any other Customer-induced
damage, or the alteration or removal of any product serial number: (b) any
modication or repair to Product (or, as applicable, any component thereof)
by any party other than SUMMIT ELECTRONICS LLC or a party authorized
in writing by SUMMIT ELECTRONICS LLC; (c) any damage to Product (or, as
applicable, any component thereof) due to power surges, incorrect electrical
voltage, misconnection 17 to any device, or malfunction of any device used
with the Product (or, as applicable, any component thereof); (d) cosmetic
damage to the Product (or, as applicable, any component thereof) caused
by normal wear and tear; (e) shipping damage that occurs while the Product
is in transit; (f) damage caused by heat sources, sunlight, electromagnet-
ic conditions, or other climatic conditions; or (g) any acts of God. Product
is sold to Customer for personal, non-commercial use only. Product is not
warranted for Customer’s commercial or rental use.
In addition, Product is not warranted against failure, and should not be
used by Customer for any application where (i) there is a risk that any data
stored on Product will be breached or otherwise compromised, or (ii) the
data stored on Product is relied upon for medical or lifesaving applications.
SUMMIT ELECTRONICS LLC disclaims any Warranty for any of the foregoing
uses to the fullest extent permitted by law. Customer assumes any and all
risks associated with such uses of Product and agrees to indemnify SUM-
MIT ELECTRONICS LLC for any damages claimed against SUMMIT ELEC-
TRONICS LLC for such uses. EXCEPT FOR EXPRESS WARRANTIES STATED
ABOVE AND TO THE MAXIMUM EXTENTPERMITTED BYLAW, THE PROD-
UCTS ARE PROVIDED “AS IS”, AND SUMMIT ELECTRONICS LLC DISCLAIMS
ALLOTHER WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED
WARRANTY(I) OF ERCHANTABILITY, (II) OF FITNESS FOR APARTICULAR
PURPOSE, OR (III) OF NON-INFRINGEMENT OF THIRD-PARTY RIGHTS. TO
THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
WILL SUMMIT ELECTRO- NICS LLC BE LIABLE TO CUSTOMER OR ANY
THIRD PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL,
EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION,
ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF ANY DATA
OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF LI-
ABILITY (INCLUDING NEGLIGENCE) AND EVEN IF SUMMIT ELECTRONICS
LLC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, SUMMIT
ELECTRONICS LLC’S AGGREGATE LIABILITY TO CUSTOMER FOR ACTUAL
DIRECT DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO
THE CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE
PRODUCT CAUSING THE DAMAGES, IF ANY. This Warranty gives Customer
specics rights, and Customer may also have other rights that vary from
jurisdiction to jurisdiction. To obtain Warranty service, Customer must email
SUMMIT ELECTRONICS LLC Technical Support prior to making a Product re-
turn. Customer must include with Product return the following items (failure
to enclose any of these items may result in a delay in the processing of your
Warranty claim): (i) a dated sales receipt that indicates the place of pur-
chase, model number of Product, and amount paid; (ii) a detailed descrip-
EN 9
Table of contents
Languages:
Other Coby Wireless Headphones manuals
