Cockpit CKNPBD User manual
USER MANUAL EN.
Cockpit RS Room Sensor
Add/Remove User Manual
Before starting adding your module, please complete set up procedure
for your COCKPIT gateway.
For more information about COCKPIT gateway set up procedure, please
refer to the COCKPIT gateway User Manual.
Type: RS Room Sensor Date: 07.06.2019
Ordering code: CKNPBD Document: COCKPIT_RS Room Sensor_Add.Rem_v1_eng 1
Adding RS Room Sensor
1
2
3
4
2
1. Click “Home Setup” tab
located in the bottom of
Cockpit@Home app.
2. Click „Manage devices”.
3. Click „HELP” button. It will
open the window with the
list of instructions (for
adding devices).
4. Select „RS Room Sensor”.
5. Read the instruction for
adding RS Room Sensor
module.
6. After having read the
instructions, click the arrow
button (twice) to exit the
instructions section.
6
3
9. COCKPIT gateway will start “Add
new devices mode”.
10. Add RS Room Sensor Sensor
module by pressing LED
button.
7. Click gear button on the top of
the screen.
8. Select “Find devices” option.
8
9
LED button
UP button
DOWN button
4
14. Name the device (e.g. RS Room
Sensor) and select room (e.g.
Living room) for the RS Room
Sensor module. When you are
done, click “DONE” button.
15
15. You will be directed back to
the screen where you can
see all added devices. Press
arrow button to proceed.
14
11. After adding process
complete, the list of devices
appears with RS Room Sensor
module present on it.
12. Click on “settings” icon located
next to the RS Room Sensor
module name.
13. Select “Edit” option.
12
13
5
16. Adding procedure for RS Room
Sensor module is now completed.
You will be redirected to “Home
Setup” screen.
17. To locate newly added device,
click “Devices” tab on the bottom
of the screen.
18. If device is not shown on the list,
choose the proper room by
pressing „Device by location”
button.
17
18
Removing RS Room Sensor
1
2
3
4
6
1. Click “Home Setup” tab located
in the bottom of Cockpit@Home
app.
2. Click „Manage devices” button.
3. Click on “settings” icon located
next to the RS Room Sensor
module name.
4. Select “Delete” option.
5. COCKPIT gateway will start
“Exclude device mode”.
6. Read the instruction for
remove RS Room Sensor
module.
7
7. Remove the module by holding
down 3 buttons (LED, UP, DOWN)
for 5 seconds.
8. When the device / node have
been removed, appropriate
information will appear on the
screen. Click “OK” button to
finish the process.
8
10. Removing procedure for RS
Room Sensor module is now
completed. You will be
redirected to “Home Setup”
screen.
9. You will be directed back to the
screen with list of devices,
where RS Room Sensor module
is not present anymore.
Press arrow button to proceed.
9
LED button
UP button
DOWN button
Other Cockpit Accessories manuals
