Cockpit Smart Plug 16A User manual

USER MANUAL EN.
Cockpit Smart Plug 16A
Add/Remove User Manual
Before starting adding your module, please complete set up procedure
for your COCKPIT gateway.
For more information about COCKPIT gateway set up procedure, please
refer to the COCKPIT gateway User Manual.
Type: Smart Plug 16A Date: 24.05.2019
Ordering code: CKNHYD Document: COCKPIT_Smart Plug 16A_Add.Rem_v1_eng 1

Adding Smart Plug 16A
1
2
3
4
2
1. Click “Home Setup” tab
located in the bottom of
Cockpit@Home app.
2. Click „Manage devices”.
3. Click „HELP” button. It will
open the window with the
list of instructions (for
adding devices).
4. Select „Smart Plug 16A”.
5. Read the instruction for
adding Smart Plug 16A
module.
6. After having read the
instructions, click the arrow
button (twice) to exit the
instructions section.
6

3
7. Click gear button on the top of
the screen.
10. Connect Smart Plug 16A
module to the power supply
to start auto inclusion
procedure or press and hold
the Service button S between
2 and 6 seconds (if module
was connected to power
supply for more than 2
minutes before press “Find
devices” button).
9. COCKPIT gateway will start
“Add new devices mode”.
7
8
8. Select “Find devices” option.

4
14. Name the device (e.g. Smart
Plug) and select room (e.g.
Kitchen) for the Smart Plug 16A
module. When you are done,
click “DONE” button.
15
15. You will be directed back to
the screen where you can
see all added devices. Press
arrow button to proceed.
14
11. After adding process
complete, the list of devices
appears with Smart Plug 16A
module present on it.
12. Click on “settings” icon located
next to the Smart Plug 16A
module name.
13. Select “Edit” option.
12
13

5
16. Adding procedure for Smart Plug
16A module is now completed.
You will be redirected to “Home
Setup” screen.
17. To locate newly added device,
click “Devices” tab on the bottom
of the screen.
18. If device is not shown on the list,
choose the proper room by
pressing „Device by location”
button.
17
18

Removing Smart Plug 16A
1
2
3
4
6
1. Click “Home Setup” tab located
in the bottom of Cockpit@Home
app.
2. Click „Manage devices” button.
3. Click on “settings” icon located
next to the Smart Plug 16A
module name.
4. Select “Delete” option.
5. COCKPIT gateway will start
“Exclude device mode”.
6. Connect the Smart Plug 16A
module to the power supply
and remove it from the system
by pressing and holding the
Service button S between 2
and 6 seconds.

7
9. Removing procedure for Smart
Plug 16A module is now
completed. You will be
redirected to “Home Setup”
screen.
7. When the device / node have
been removed, appropriate
information will appear on the
screen. Click “OK” button to
finish the process.
7
8. You will be directed back to the
screen with list of devices,
where Smart Plug 16A module
is not present anymore.
Press arrow button to proceed.
8

COCKPIT Smart Home d.o.o. Nova Gorica
Ulica Klementa Juga 007
5250 Solkan
Slovenia
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]
Web: www.yourcockpit.biz
8