COLAMY 2181 User manual

E-MAIL
[email protected]
WEB
colamyhome.com
TEL
800-507-2215
INSTRUCTION MANUAL
Model No.: 2181
COLAMY promises to repair or replace any COLAMY chair that is found to be defective in material or workmanship within one year from the date of original purchase so long as you,
the original purchaser, still owns it. This is your sole and exclusive remedy. This warranty is subject to the provisions below.
This warranty does not apply and no other warranty applies to:
EXCLUSIONS
Normal wear and tear, which are to be expected over the course of ownership.
Misuse, abuse, or excessive use of the product.
Modications or attachments to the product that are not approved by COLAMY.
Products that were not installed, used, or maintained in accordance with product
instructions and warnings.
Products used for rental purposes or unauthorized retail activities.
Seating Usage: Normal use for seating is identied as the equivalent of a single shift, forty-
(40) hour workweek. To the extent that a seating product is used in a manner exceeding this,
the applicable warranty period will be reduced in a pro-rata manner.
We adopt a 30-day return policy which means that all products purchased on this website may
be returned to us within the timeframe. You need to contact us within 30 days after the product(s)
came into your possession and the product(s) must be returned to us without any undue delays.
RETURN POLICY
Returned products must be returned in the same condition as they were sent and they must
be sent in their original packaging.
If the product is not faulty, (i.e. if you changed your mind or if you are unhappy with
the product for some other reason), the cost of shipping will fall on you. And it is your
responsibility that the package arrives safely to us so we recommend that you use a courier
service where it is possible to track the shipment.
If the product is faulty when you receive it, please contact us and we will help you out.
We reserve the right to give a partial refund in cases when the product(s) is not in an unused
condition, is damaged or has missing parts, not due to our error.
To request a return, please ll out the contact form on our website and attach a copy of your invoice
as proof of purchase and the reason for your return in the message.
Then we will provide the return address for the product as soon as possible.
Once the returned product has been received by us and inspections have been completed, a
specic disposition will be provided to you.
HOW RETURNS WORK
In addition, if the return is approved, the refund amount will be automatically credited to your
original payment method.
ASSEMBLY VIDEO
LIMITED WARRANTY
LIMITED WARRANTY CAUTION: COLAMY DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE
TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE
PRODUCT.

Casters *5
Seat Cushion *1
Bolts M6*25mm *4 Bolts M8*25mm *4
Bolts M8*25mm *4
Bolts M6*25mm *4
Bolts M8*35mm *2
Bolts M8*35mm *2
Bolts M8*35mm *4
Bolts M8*35mm *8 Plastic Caps *8 Wrench *1
Wrench *1
Wrench *1
Wrench *1
Wrench *1
Plastic Caps *8
Wrench *1
Star Base *1
Back Cushion *1
Lift *1
Arms*2 Lift Cover *1
Seat Plate *1
1
5
9
2
6
10
10
9
11
11
11
3
7 8
11
4
12 13
13
13
13
13
12
13
Tight
Loose
Pneumatic Seat Height
Adjustment
Seat Back Locking Mechanism
Rock Tension Adjustment
Pulling the lever upwards enables
height adjustment of the seat, then
the seat can be locked at a xed
height by releasing the lever.
Simply press the lever down to lock
the seat in an upright position.
Simply adjust the knob
counterclockwise to tighten the tension
of rocking. Or loosen the tension by
turning the knob clockwise whenever
needed.
PRODUCT FEATURES
ASSEMBLY PARTS AND TOOL
ASSEMBLY INSTRUCTIONS
WARNING SAFETY INFORMATION
WEIGHT CAPACITY FOR SEATING: 400LBS
Sit in the center of the
chair with your back
against the backrest
Do not push the chair around
when a person is sitting in it
Do not sit at the front edge
of the chair
Do not push down on the
backrest when a person is
reclined
Do not stand on the chair
Do not place all your weight
on the backrest only
Do not use the chair with more
than one person
BEFORE YOU GET STARTED, A FEW POINTERS:
PLEASE MAKE SURE ALL THE PARTS ARE INCLUDED. MISSING PARTS? [email protected]
Mind the important safety
information
Having a friend to help makes
assembly extra-easy
Turn the Star Base(2) upside down, then press the Casters(1) into the holes at the end of
each base leg, insert the Lift(3) into the center hole of the Star Base(2), the Lift Cover(8)
should be placed over the Lift(3).
Attach the Arms(7) to the Seat Cushion(5) with FOUR Bolts M8*35mm(11) by using the
Wrench(13).
Lay the Back Cushion(6) on the seat of the chair with the top of the cushion toward the
front. Attach the Back Cushion to the Arms(7) with TWO Bolts M8*35mm(11) screwed to the
LOWER holes by using the Wrench(13).
Rotate the back of the chair up, then secure it with the TOP TWO Bolts M8*35mm(11)
with the Wrench(13). Adjust the balance on each side of the chair, and fully tighten all the
bolts at this step.
Press the Plastic Caps(12) into the Arms holes to cover the bolts.
Align the Seat Plate(4) over the pre-drilled holes underneath the Seat Cushion(5), make
sure that the front of the Seat Plate is facing the front of the Seat Cushion. Attach the Seat
Plate to the Seat Cushion using FOUR Bolts M8*25mm(10), tighten all the bolts with the
Wrench(13), being careful not to miss-thread the bolts or damage the seat.
Align two control handles of the Seat Plate(4) over the pre-drilled holes underneath
the Seat Cushion(5), attach these two handles to the Seat Cushion using FOUR Bolts
M6*25mm(9), tighten all the bolts with the Wrench(13).
Turn the Seat Cushion(5) upright and align the center hole of the Seat Plate over the
Lift(3), then push the Seat Cushion down onto the Lift rmly until the connection is secure.
Step 1 Step 5
Step 6
Step 7
Step 8
Step 2
Step 3
Step 4
3
2
1
8
4
4
5
3
11
11
11
11
7
7 7
10
9
9
5
5
front
front
Note 1: Arm rests are labeled with an "L" (left) or "R" (right) to show which sides they should be
placed on.
Note: Avoid tightening all the bolts to 100% at this stage and leave some space for adjustments in the
next steps.
Note 2: Do not tighten all the bolts to 100%, make sure it has space to adjust in the next steps.
1212
6
6
Please read the instructions carefully and follow the assembly steps.
To ensure proper assembly, please follow all steps and use all parts provided. Not following
this warning may result in serious injury to you or others.
To prevent misalignments, keep the screws loose and do not tighten them until they are all
in their correct positions.
Avoid overtightening or forcing the screws, as this could cause them to break, strip, or
damage the threads of the holes.
Using the wrong size of screws for a particular part could cause damage to the screw or the
part.
Please lubricate all moving parts regularly and tighten all bolts and screws every 6 months,
or as needed.