COLAMY 2219 User manual

E-MAIL
[email protected]
WEB
colamyhome.com
TEL
800-507-2215
INSTRUCTION MANUAL
Model No.: 2219
COLAMY promises to repair or replace any COLAMY chair that is found to be defective in material or workmanship within one year from the date of original purchase so long as you,
the original purchaser, still owns it. This is your sole and exclusive remedy. This warranty is subject to the provisions below.
ASSEMBLY VIDEO
LIMITED WARRANTY
LIMITED WARRANTY CAUTION: COLAMY DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE
TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE
PRODUCT.
This warranty does not apply and no other warranty applies to:
EXCLUSIONS
Normal wear and tear, which are to be expected over the course of ownership.
Misuse, abuse, or excessive use of the product.
Modications or attachments to the product that are not approved by COLAMY.
Products that were not installed, used, or maintained in accordance with product
instructions and warnings.
Products used for rental purposes or unauthorized retail activities.
Seating Usage: Normal use for seating is identied as the equivalent of a single shift, forty-
(40) hour workweek. To the extent that a seating product is used in a manner exceeding this,
the applicable warranty period will be reduced in a pro-rata manner.
We adopt a 30-day return policy which means that all products purchased on this website may
be returned to us within the timeframe. You need to contact us within 30 days after the product(s)
came into your possession and the product(s) must be returned to us without any undue delays.
RETURN POLICY
Returned products must be returned in the same condition as they were sent and they must
be sent in their original packaging.
If the product is not faulty, (i.e. if you changed your mind or if you are unhappy with
the product for some other reason), the cost of shipping will fall on you. And it is your
responsibility that the package arrives safely to us so we recommend that you use a courier
service where it is possible to track the shipment.
If the product is faulty when you receive it, please contact us and we will help you out.
We reserve the right to give a partial refund in cases when the product(s) is not in an unused
condition, is damaged or has missing parts, not due to our error.
To request a return, please ll out the contact form on our website and attach a copy of your invoice
as proof of purchase and the reason for your return in the message.
Then we will provide the return address for the product as soon as possible.
Once the returned product has been received by us and inspections have been completed, a
specic disposition will be provided to you.
HOW RETURNS WORK
In addition, if the return is approved, the refund amount will be automatically credited to your
original payment method.

Note 1: Arm rests are labeled with an "L" (left) or "R" (right) to show which sides they should be
placed on.
Note 2: Tight all the bolts to 70%, make sure it have space to adjust, than tight all the bolts to 100%.
Back Cushion *1
Bolts M8*16mm *4
Lift *1
Seat Cushion *1
Bolts M8*57mm *4
Lift Cover *1
Arms *2
Plastic Caps *4
Casters *5
Star Base *1
Bolts M8*16mm *4
Plastic Caps *4
Bolts M8*57mm *4
Wrench *1
Wrench *1
Wrench *1
1
1
9
10
10
9
1
11
8
5
6
5
2
2
9
6
3
10
7
4
8
10
9
11
11
11
Pneumatic Seat Height
Adjustment
Tilt Angle Adjustment
Convenient Hidden Footrest
Pulling the lever upwards enables
height adjustment of the seat, then
the seat can be locked at a xed
height by releasing the lever.
Simply pull up the lever and recline
back to adjust the tilt angle, and then
push down to lock the backrest.
Simply pull out the footrest by
hand and kick it back by your feet
to retract
PRODUCT FEATURES
ASSEMBLY PARTS AND TOOL
ASSEMBLY INSTRUCTIONS
WARNING SAFETY INFORMATION
WEIGHT CAPACITY FOR SEATING: 400LBS
Sit in the center of the
chair with your back
against the backrest
Do not push the chair around
when a person is sitting in it
Do not sit at the front edge
of the chair
Do not push down on the
backrest when a person is
reclined
Do not stand on the chair
Do not place all your weight
on the backrest only
Do not use the chair with more
than one person
BEFORE YOU GET STARTED, A FEW POINTERS:
PLEASE MAKE SURE ALL THE PARTS ARE INCLUDED. MISSING PARTS? [email protected]
Mind the important safety
information
Having a friend to help makes
assembly extra-easy
Turn the Star Base(4) upside down, then press the Casters(7) into the holes at the end of
each base leg.
Push the seat cushion down onto the lift rmly until the connection is secure.
Insert the Lift(5) into the center hole of the Star Base, the Lift Cover(6) should be placed
over the Lift.
Attach the Arms(3) to the Seat Cushion(2) and Back Cushion(1) with FOUR M8*57mm
Bolts(9), using the Wrench(11).
Attach the Back Cushion(1) and Seat Cushion(2) with FOUR M8*16mm Bolts(8), tighten all
the bolts with the Wrench(11).
Press the Plastic Caps(10) into the Arms holes to cover the bolts.
Step 1 Step 4
Step 2 Step 5
Step 3
Step 6
7
4
Note 1: Tight all the bolts to 70%, make sure it have space to adjust, than tight all the bolts to 100%.
Please read the instructions carefully and follow the assembly steps.
To ensure proper assembly, please follow all steps and use all parts provided. Not following
this warning may result in serious injury to you or others.
To prevent misalignments, keep the screws loose and do not tighten them until they are all
in their correct positions.
Avoid overtightening or forcing the screws, as this could cause them to break, strip, or
damage the threads of the holes.
Using the wrong size of screws for a particular part could cause damage to the screw or the
part.
Please lubricate all moving parts regularly and tighten all bolts and screws every 6 months,
or as needed.