ColDesi Spangle Elite User manual

User’s Manual
User’s ManualUser’s Manual
User’s Manual

Spangle Elite
technics - 2 -

Spangle Elite
- 3 -
Contents
1. Safety Instructions ............................................................................................................................. 13
2. Installation and Checklists ............................................................................................................... 15
3. Operation Method and Individual Features Related to asic Operation ............................ 17
3-1) Individual equipment part names and features ............................................................................................ 17
3-2) Exchanging the Press Unit ..................................................................................................................................... 1
3-3) Material Installation .................................................................................................................................................. 1
3-4) Self-Test ......................................................................................................................................................................... 19
4. How to run Spangle Elite program ............................................................................................... 21
4-1) Start Screen .................................................................................................................................................................. 21
4-2) Preparation ................................................................................................................................................................... 24
4-3) Loading Design ........................................................................................................................................................... 25
4-4) Design Set up .............................................................................................................................................................. 27
4-5) Sending design ........................................................................................................................................................... 32
4-6) Running, Stopping the Work ................................................................................................................................ 32
4-7) Off-set Setup and How to use Origin-set ........................................................................................................ 33
4- ) Color Off-set Setup ................................................................................................................................................... 34
5. Error Occurrence and Measures ................................................................................................... 35
6. Modification Method for Essential Parts of Machine Operation ......................................... 37
7. Maintenance and Checklists .......................................................................................................... 43
※ Consumables .................................................................................................................................... 44

Spangle Elite
-4 -

Spangle Elite
- 5 -
CONTENTS
◉ Machine Dimension
※ Spangle Elite (Standard) ........................................................................................................................... 7
◉ Machine Layout
(A) Machine Layout (Real View-1) ...............................................................................................................
(B) Machine Layout (Real View-2) ............................................................................................................. 10
(C) Machine Layout (Real View-3) ............................................................................................................. 11
(D) Warning Labels ......................................................................................................................................... 12
Machine Dimension & Layout

Spangle Elite
-6 -

Spangle Elite
- 7 -
※ Spangle Elite (Standard)
◉ Machine Standard DIMENSIONS
◉ Packing Standard DIMENSIONS

Spangle Elite
-8 -
※ Articles supplied
1 Fuse 3A
2 L Wrench (4mm)
3 L Wrench (3mm)
4 Oil
5 Grease (50g)
6 USB able
7 Power ord (220V)

Spangle Elite
- 9 -
(A) Machine Layout (Real View-1)
Ref.No Part No Part Name
A-1 PSM-MS-S011 System over
A-2 ASP-EL-0007E Emergency Switch
A-3 PSM-MS-M025 Y Axis UP Roller Shaft
A-4 PSM-MS-A002 Leveling Foot
A-5 PSM-MS-P028 Y Axis Roller Base
A-6 PSM-MS-S007 Front Sub Plate
A-7 PSM-MS-A001 Keyboard (Sticker)

Spangle Elite
-10 -
(B) Machine Layout (Real View- )
Ref.No Part No Part Name
B-1 PSM-MS-S004 Right over
B-2 PSM-MS-A005 Power Socket
B-3 PSM-MS-A006 Fuse Holder
B-4 PSM-EL-B004 USP Port P B
B-5 PSM-MS-S005 Back over
B-6 PSM-MS-A007 Power Switch
B-7 PSM-MS-S003 Left over

Spangle Elite
- 11 -
(C) Mechanism Layout (Real View-3)
Ref.No Part No Part Name
B-1 Spangle assette Tape
B-2 PSM-MS-S107 Guide Roller
B-3 PSM-MS-S107 Guide Roller
B-4
PSM-MS-M001 Press Unit (1.2mm)
PSM-MS-M002 Press Unit (2mm)
PSM-MS-M003 Press Unit (3mm)
PSM-MS-M004 Press Unit (4mm)
B-5 PSM-MS-P026 Press Guide Left
PSM-MS-P027 Press Guide Right
B-6 PSM-MS-S021 Rewind Tension Spring
B-7 PSM-MS-S016 Rewind Tension
B-8 PSM-MS-P011 Feeding Roller
B-9 PSM-MS-P018 Feeding Rubber Roller
B-10 PSM-MS-P014 Rewind Plate Knob
B-11 PSM-MS-S013 Rewind Front Plate

Spangle Elite
-12 -
(D) Warning Labels
◉ Please be careful during machine operation.

Spangle Elite
- 13 -
1. Safety Instructions
Please pay close attention to the below safety instructions. All the safety instructions and operating
guidelines should be read before operating the equipment.
1-1) Transporting the Machine
You should be acquainted with the safety regulations before transporting the machine. Follow the
guidelines listed below.
1) Precautions for transporting the Spangle Elite Machine
◉ Two people are needed when lifting the Spangle Elite Machine.
◉ Use of a hand pallet truck is recommended for long distance transportation.
2) When Using a Hand Pallet
◉ To prevent deformation, use a forklift to position the machine horizontally while transporting.
◉ When lifting the machine up and down, make sure no one is around.
1-2) Installing the Machine
If not appropriately installed, breakdowns and/or malfunctions could occur. In order to prevent this,
follow the conditions listed below.
◉Please install on the stand. That stand must be able to hold the weight of the Spangle Elite.
◉Because dust and moisture can contaminate or corrode the machine, please install an air conditioner
and clean the machine regularly.
◉ Install the machine in a place where it will not be exposed to direct sunlight.
◉ If the machine is exposed to direct sunlight for too long, there might be discoloration and
deformation of the body.
◉ For enough space to operate and repair, secure at least 60cm of space from the wall to the left, right,
and rear of the machine.
※ For more detailed installation information, please refer to [2. Installation and Checklists].

Spangle Elite
-14 -
1-3) Instructions on Operating the Machine
◉ Make sure to check the caution and warning stickers on the main body of the machine and obey the
following guidelines.
◉ Before you operate the machine, read the instructions in full and make sure you thoroughly
understand the contents dealing with machine operation.
◉ Operate the machine only after making sure that no one is operating on a moving part of the
machine and that there are tools on the part.
◉ If the machine is operating, do not place head or hands in close proximity, as it can be dangerous.
◉ Shut off the power supply before opening a power supply box or any electrical outlet, and make
sure the power switch is turned to “OFF."
◉ When you change the material or work behind the machine, you must stop operating the machine.
1-4) Repair
When repairing the machine, follow the guidelines below in order to prevent an accident.
◉ If the machine needs to be repaired, it must be done by electricians or users educated and
designated by our company.
◉ You must not change specifications or certain parts of the machine without consultation with our
company. These changes may threaten safety during operation and could cause malfunctions.
◉ When repairing the machine, you must exchange parts with ‘Spangle Elite’ parts supplied by our
company.
◉ After repairing the machine, replace all the safety covers removed during repair.
◉ There is a danger of serious injury by electric shock or being caught in the machine.
◉ Make sure to shut off the machine's power before repairing, and wait 2~3 minutes for
the machine to discharge completely.

Spangle Elite
- 15 -
2. Installation and Checklists
The installation guidelines and electrical specifications of this machine are specified as follows.
Negligence of these guidelines may cause accidents, dysfunctions, and/or malfunctions.
-1) Installation
To prevent malfunctions, breakdowns, and/or loss of property, please use the machine in light of the
following information.
◉ Dust and moisture may cause contamination, rust, fire, and/or electric shock.
◉ If exposed to direct sunlight for too long, the machine might discolor or be deformed.
◉ Do not approach the machine while in possession of flammable material. It causes fire.
◉ For enough space to operate and repair, secure at least 60cm of space from the wall to the left, right,
and rear of the machine.
- ) Electricity Installment Environment
Before initiating installation, make sure the machine’s power supply corresponds to the power supply
of the installation area.
1) Rated voltage: A 220V (50~60 Hz)
2) Allowable voltage range: Within ±10% of Rated Voltage
3) Power capacity : 0.8KVA
4) Insulation resistance: Over 10MΩ (Measured in 500V Insulation Tester)
5) To operate the machine stably, you should connect it with a power line separated from machines like
elevators or air conditioners, which could impact the functionality of the machine.
6) When installing the power cable, install it apart from the operation space so that the operator does
not fall over it.
7) If metal or other external elements come into contact with the plug, it could cause fire and/or
electric shock.
8) You should use a power connector that is connected to earth.
9) If you want to connect the machine to an external power source, leave it to the technician or
electrician designated by our company.
※ In areas of the US that use 110V, you must use a transformer.

Spangle Elite
- 16 -
2-3) Power Cord Connection and Power Button
1) Power ord onnection
◉ After connecting the power cord to the socket located
at the back left of the equipment (picture [2-1 ⓐ],
connect the Spangle Elite to an outlet.
◉ If in an American area that uses 110V, stick the power
supply into the transformer supplied with the machine. ▶Picture [2-1]
2) Fuse Exchange
◉ If the power supply does not fit into the equipment, you should check the fuse first.
◉ The equipment uses a 3A fuse.
3) Power Button
→ At its rear, the machine has a power button on the
right. Make sure that the power cord is properly
connected to the power socket.
▶Picture [2-2]
2-4) Initial Equipment Setup
1) Keep the work table level horizontally at first. Adjust the horizontality of the machine after it is put
on the work table.
2) In order to prevent the head from shifting in the course of the equipment's movement, tie the
equipment's left-hand Rail Guide to the X-timing belt with a cable tie. Refer to the pictures below and
remove the cable tie.
※ If the equipment again moves for long periods of time, bind it with the cable tie as in picture [2-3].
▶Picture [2-3] ▶Picture [2-4]
3) Before connecting the equipment, you must check the voltage.
※ Because Spangle Elite uses 220V, you must use a transformer in American areas.
※ Make sure to thoroughly examine the above instructions before starting operation of the
machine.

Spangle Elite
- 17 -
3. Operation Method and Individual Features Related to Basic
Operation+4
3-1) Individual equipment part names and features
1) Keyboard eature and Explanation
▶Picture [3-1]
Signal
(Lamp) This is an LED lamp that shows the equipment's operation status.
Power
(Lamp)
This is an LED lamp that displays the ON/OFF status of the
equipment's power supply.
Arrows Use this to move the frame up, down, left, and right.
FUN . This sets up the Offset feature.
FRAME Run this feature to return to the starting point.
STOP Use this to stop the operation of the work.
2) Emergency Switch
◉ Find the emergency switch on the upper left-hand cover of the machine.
◉ If a malfunction occurs during the operation of the machine, this button
can be used to stop the operation immediately.
◉ The operation will immediately stop when the emergency switch is on.
▶Picture[3-2]
3) USB Port
◉ Find the USB port on the right side of the machine. This
is to be used when putting designs into the machine. ▶Picture[3-3]

Spangle Elite
-18 -
3- ) Exchanging the Press Unit
① When exchanging the Press Unit, use the keyboard
arrows to move the Press Unit to the center.
② If you grab the press unit where indicated in picture
[3-4] ⓐ and pull, the Press Unit will come separated.
③ To equip the Press Unit, grab where indicated and push.
▶Picture[3-4]
3-3) Material Installation
▶Picture [3-5]
① Place the cassette into the spot designated in picture [3-5] ⓐ.
② Hang the material in the direction of the arrows as designated in picture [3-5].
※ You must use the cassette type provided by the company when running Spangle
Elite.
ⓐ

Spangle Elite
- 19 -
3-4) Self-Test
◉ This is a feature that checks parts of machine separately by itself
◉ When you install the machine you can check whether or not the machine is ready to run By running
Self-Test,
◉ If an error occurs during operation, you can check a part that needs to fix by running Self-Test
1) Running Self-Test
◉ Turn on the power while press the [FUN .] button.
→ If you Hear alarm, Self-test will run.
2) How to run Self-Test
◉ Please refer to Picture [3-6] to run Self-Test.
◉ When you press the [STOP] button, the test will stop.
.
▶Picture [3-6]
⑥ T-Sensor Test
◉When you press the Guide Roller (ⓐ), the machine sound
the alarm which mean the machine is good.
▶Picture [3-7]
① Y Axis Moving Test
②
X Axis Moving Test
③
Rewind Moving Te
st
※ To finish Self-Test
④
Feeding Moving Test
⑤ Main motor rotating test ※ Stop testing

Spangle Elite
-20 -