COLMI V33 User manual

USER MANUAL
V33
Downloading the App
Scan the following QR code, download and install the App.
Scan QR Code and Download

Downloading the App
Charging the device to active before the first time using;
To charge your device, plug the charging cable into the
adapter or USB port on your computer.
Pairing
Open the App and set up your profile
Go to the
[
Device ] , Click
[
Add a Device ]
Choose your device on the scanning list
Finish
The MAC address on the "Setting"-"About" page could
help you identify your device on the scanning list.

Use the Touch Screen Smart Watch Features
Enter body temperature mode and wear a bracelet
Close to the skin for testing
The temperature was measured every day
Control Center
Feature pages
Menu
Messages
Swipe Down
Swipe Up
Swipe Left
Swipe Right

Smart Watch Features
when the watch is connected to the mobile phone, you
can dial the watch to control the mobile phone to make a
call; You can also answer calls from mobile phones on
your watch. At the same time, you can also check the call
record information on your watch. When using the call
function, when using the call function, make sure the
connection state between the watch and the mobile
phone is stable.
Smart Watch Features
Sleep
If you keep wearing Smart Watch in
your sleep , it can provide the hours
slept and quality of sleep stats on
both the screen and the APP.NOTE:
Sleep stats reset to zero at8:00 pm.
Sports
Smart Watch automatically tracks
steps taken on the screen. NOTE:
Your movement stats reset to zero
at midnight.
Heart Rate Test
The Smart Watch could record your
heart rate all day.
You also could tap on the page to
start measuring heart rate.
Training
Tap the training icon on the menu to
start a new training measure
recording, there are 8 sport modes to
be chosen. The last training recording
will be shown on the training page.

Smart Watch Features
Remind to Drink
The smart watch will remind you
“Time to Drink Some Water" at the
planned drinking time.
Note: You can set the feature in the
APP.
Weather
It could show the weather info of current
and tomorrow on the weather page.
Weather info is synced after connecting
with the APP, it will not be updated after a
long disconnected.
Sp02 Test
Tap the sp02 page to start
measuring your Spo2.
On the Sp02 page, it can show the
spo2 measured data of the last
times.
Messages Reminder
The device can sync incoming
notifications from Twitter, Facebook,
Whatsapp, Instagram etc.
Recently 5 messages can be stored.
Note: You can switch on/off the incoming
notification in the APP.
Smart Watch Features
Remote Shutter
After connecting the device, you can
remote control the camera on your
phone.
Other Features
other features include mute on/off,
brightness, about, factory reset and
power off.
Player
After connecting the device, you can
remote control the music player on
your phone.
Stop Watch
Tap the start button on stopwatch
page to start timing, and tap the stop
button to stop timing.

Smart Watch Features
Silent Alarms
set up the alarm on the APP, the
device will vibrate to remind on time.
Remind to Move
The device will vibrate to remind you
to make a relax after 1 hour sitting.
Note: You can switch on/off the
feature in the APP.
Theater Mode
The device will turn off the vibration
and turn down the brightness when
the theater mode is turned on. Note:
You can turn on/off the theater mode
in the control center.
Getting to Know Your Device
1.Using in Wet Conditions
Your device is water-resistant, which means it is rain-
proof and splash-proof and can stand up to even the
sweatiest workout.
NOTE: Do not swim with your Smart Bracelet. We also
don't recommend showering with your wristband;
though the water won't hurt the device, wearing it 24/7
does not give your skin a chance to breathe. Whenever
you get your bracelet wet, dry it thoroughly before
putting it back on.
2.Using Quick View
With Quick View you can check the time or the
message from your phone on your Smart Bracelet
without taping. Just turn your wrist towards you and the
time screen will appear for a few seconds.

General Info & Specifications
1.Environmental Conditions
Operating temperature: 14°F to 122°F(-10°C to
50·C)Non-operating temperature: -4°F to 140F(-20°C
to 60°C)
2.Size
Fits a wrist between 5.5 and 7.7 inches in
circumference.
3.Disposal and Recycling
Please kindly be aware that it is the consumer's
responsibility to properly dispose and recycle Smart
Bracelet and accompanying components. Do not
dispose of Smart Bracelet with common household
waste, the Smart Bracelet unit is considered electronic
waste and should be disposed of at your local
electronic equipment collection facility.
For more information, please contact your local
electronic equipment waste management authority or
the retailer where you bought the product.