Print head cleaning
The cartridge is a sensitive part and requires special care. Especially when the e-mark® go is not
used on a daily basis, more intensive cleaning is necessary. We recommend weekly cleaning.
Automatic cleaning cycle
Whenever the e-mark go is taken from the docking station, the print head is cleaned
automatically. The intensity of cleaning increases the longer the e-mark go is not used.
1. Take e-mark go from docking station
2. Hold briefly in the air (wait for ink to disperse)
3. Put on paper & print!
Before printing on a ribbon, special paper or material,
we recommend doing a test imprint.
Manual print head cleaning
1. Take a slightly dampened piece of cloth
(only pure water, no cleaning agent!)
2. Take the e-mark go out of the docking station
3. Wipe the print head from top to bottom
(never sideways, as this could damage the cartridge)
For a more intense clean try the quick cleaning in the
app.
