Color imagination LEDBEAM 120F SI-029 User manual

LEDBEAM
LEDBEAM
LEDBEAM
LEDBEAM 120F
120F
120F
120F
SI-0
SI-0
SI-0
SI-0 29
29
29
29
User
User
User
User Manual
Manual
Manual
Manual
KEEP
KEEP
KEEP
KEEP THIS
THIS
THIS
THIS MANUAL
MANUAL
MANUAL
MANUAL FOR
FOR
FOR
FOR FUTURE
FUTURE
FUTURE
FUTURE NEEDS
NEEDS
NEEDS
NEEDS

1.
1.
1.
1. Un
Un
Un
Un packing
packing
packing
packing
Thank you for choosing Color Imagination ’ s LEDBEAM 120F. For your own safety, please read
this manual before installing the device. This manual covers the important information on
installation and applications. Please install and operate the fixture with following instructions.
Meanwhile, please keep this manual well for future needs.
Color Imagination ’ s LEDBEAM 120F is made of a new type of high temperature strength of
engineering plastics and cast aluminum casing with nice outlook. The fixture is designed and
manufactured strictly following CE standards, complying with international standard DMX512
protocol. It ’ s available independently controlled and linkable with each other for operation. And it is
applicable for large-scale live performances, theater, studio, nightclubs and discos.
SI-0 29 adopts 12PCS CREE XLamp MC-E 10W 4-IN-1 LEDs(RGBW) which features high
brightness and stability. Please carefully un pack it when you receive the fixture and check whether
it is damaged during the transportation. And please check whether the following items are included
inside the box:
LEDBEAM 120F ---- ----- O ne Signal Cable---- O ne
Hanging Bracket ------ - One Power Cable----One
Safety Chain---------One User Manual---- O ne
1
1
1
1 1
1
1
1 .
.
.
. Maintenance
Maintenance
Maintenance
Maintenance and
and
and
and Cleaning
Cleaning
Cleaning
Cleaning
The following points have to be considered during the inspection:
1 . All screws for installing the devices or parts of the device have to be tightly connected and must not
be corroded. 2 . There must not be any deformations on the housing, color lenses, fixations and
installation spots (ceiling, suspension, trussing). 3 . Mechanically moved parts must not show any
traces of wearing and must not rotate with unbalances. 4 . The electric power supply cables must not
show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled
installer and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to
the lights. 1) Clean the inside and outside lens each week to avoid the weakneness of the lights due
to accumulation of dust. 2) Clean the fan each week. 3) A detailed electric check by approved
electrical engineer each three month, make sure that the circuit contacts are in good condition,
prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use
alcohol or solvents.There are no serviceable parts inside the device. Please refer to the instructions
under “ Installation instructions ” .Should you need any spare parts, please order genuine parts from
your local dealer.

10.
10.
10.
10. Specifications
Specifications
Specifications
Specifications
Input Voltage: AC90-260V 50/60Hz
LED Quantities: 12 PCS CREE XLamp MC -E 10W 4-IN-1 LEDs (R, G, B, W)
Control Signal: DMX512, master-slave and sound activated or auto operation
Control Channel: 15 DMX channels
Power Consumption: 140W
Dimensions: 152(D)*265(W)*310(H)mm
Packing Dimensions:260(D)*320(W)*335(H)mm
Net Weight: 4.9kg
Gross Weight: 7kg
2.
2.
2.
2. S
S
S
S afety
afety
afety
afety I
I
I
I nstructions
nstructions
nstructions
nstructions
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a
safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
If the device has been exposed to temperature changes due to environmental changes, do not switch
it on immediately. The arising condensation could damage the device. Leave the device switched off
until it has reached room temperature.
This device falls under protection-class I. Therefore it is essential that the device be earthed.
The electric connection must carry out by qualified person.
The device shall only be used with rate voltage and frequency.
Make sure that the available voltage is not higher than stated at the end of this manual.
Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case,
replacement of the cable must be done by an authorized dealer.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power cord by the plug. Never pull out the plug by tugging the power cord.
During initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective, it should decrease gradually.
Please don't project the beam onto combustible substances.
Fixtures cannot be installed on combustible substances, keep more than 50cm distance with wall for
smooth air flow, so there should be no shelter for fans and ventilation for heat radiation.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

3.
3.
3.
3. Operation
Operation
Operation
Operation Instructions
Instructions
Instructions
Instructions
-The moving head is for beam and wash effect for on-site decoration purpose .
-Don ’ t turn on the fixture if it ’ s been through severe temperature difference like after
transportation because it might damage the light due to the environment changes. So make sure
to operate the fixture until it is in normal temperature .
- This light should be keep away from strong shaking during any transportation or movement.
-Don ’ t pull up the light by only the hea d, or it might cause damages to the mechanical parts.
- Don ’ t expose the fixture in overhea t, moisture or environment with too much dust when installing
it. And don ’ t lay any power cables on the floor. Or it might cause electronic shock to the people.
- Make sure the installation place is in good safety condition before installing the fixture.
-Make sure to put the safety chain and check whether the screws are screwed properly when
installing the fixture.
- Make sure the lens are in good condition. It ’ s recommended to replace the units if there are any
damages or severe scratch.
- Make sure the fixture is operated by qualified personnel who knows the fixture before using.
- Keep the original packages if any second shipment is needed.
- Don ’ t try to change the fixtures without any instruction by the manufacturer or the appointed
repairing agencies.
-It is not in warranty range if there are any malfunctions from not following the user manual to
operate or any illegal operation, like shock short circuit, electronic shock, lamp broke, etc.
9.
9.
9.
9. Key
Key
Key
Key Features
Features
Features
Features
12 PCS CREE XLamp MC -E 10 W 4-IN-1 LEDs (R,G,B,W)
60,000 hours life span for LEDs and low power consumption
Intelligent temperature sensor for LEDs(over heat protection)
High efficiency 8 degree optic lens
Color range with 16.7 millions additive RGBW colors
High light output as 684 LUX@ 7M at full
0-100% smooth linear dimmer with flicker free
20t/s strobe effect with variable speed
Pre-programmed random strobe and pulse effects
15CH DMX channels
Built-in programs with macro effects
DMX512, master-slave and sound activated controllable or auto operation
High definition blue TFT LCD display
Quiet, smooth and fast PAN/TILT movement
Low noise and efficient FAN cooling system
540 ° PAN and 270 ° TILT movement
Scan position memory, auto reposition after unexpected movement
Compact size with only 4.9KG body and 310mm in height
IEC power connector
45 ℃max ambient temperature
IP20 protection rating
3-Pin XLR DMX input/output

15 ID
90-99 ID9
100-109 ID10
110-119 ID11
120-129 ID12
130-139 ID13
140-149 ID14
150-159 ID15
160-169 ID16
170-179 ID17
180-189 ID18
190-199 ID19
200-209 ID20
210-219 ID21
220-229 ID22
230-239 ID23
240-249 ID24
250-255 ID25
4.
4.
4.
4. Mounting
Mounting
Mounting
Mounting and
and
and
and Installation
Installation
Installation
Installation
Cautions:
Cautions:
Cautions:
Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas,
or in areas were the fixture might be reached by
unauthorized personnel.
Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 times the device ’s weight.
Fixture installation must always be secured with a secondary safety attachment, such as an
appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the fixture from a
periodic safety inspection of all installation material and the fixture. If you lack these qualifications,
do not attempt the installation yourself. Improper installation can result in bodily injury.
Be sure to complete all rigging and installation procedures before connecting the main power cord
to the appropriate wall outlet.
Clamp
Clamp
Clamp
Clamp Mounting:
Mounting:
Mounting:
Mounting: The LEDBEAM 120F provides a unique mounting bracket assembly that
integrates the bottom of the base, the included “ Omega Bracket, ” and the safety cable rigging
point in one unit (see the illustration below). When mounting this fixture to truss be sure to secure
an appropriately rated clamp to the included omega bracket using a M10 screw fitted through the
center hole of the “ omega bracket ” . As an added safety measure be sure to attached at least one
properly rated safety cable to the fixture using on of the safety cable rigging point integrated in the
base assembly

Regardless of the rigging option you choose for your LEDBEAM 120F , always be sure to secure your
fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable o n the hanging
bracket as illustrated above. Be sure to only use the designated rigging point for the safety cable and never
secure a safety cable to a carrying handle.
8.
8.
8.
8. Photometric
Photometric
Photometric
Photometric Data
Data
Data
Data

7.
7.
7.
7. DMX
DMX
DMX
DMX Channels
Channels
Channels
Channels
Channel
Channel
Channel
Channel
Function
Function
Function
Function Values
Values
Values
Values Description
Description
Description
Description
1
PAN 0-255
PAN Movement
2
PAN Fine 0-255
Fine control of Pan movement
3
TILT 0-255
Tilt Movement
4
TILT Fine 0-255
Fine control of Tilt movement
5 Dimmer 0-255 0-100% Dimmer from dark to bright
6 Strobe 0-255 Strobe effect from slow to fast
7 Red 0-255 0-100% Red dimmer from dark to bright
8 Green 0-255 0-100% Green dimmer from dark to bright
9 Blue 0-255 0-100% Blue dimmer from dark to bright
10 White 0-255 0-100% White dimmer from dark to bright
11
Color
Changing
0-255 Color changing effect
12 Macro
0-010 CH1-CH11 valid
011-120 Color jumping
121-180 Color fading
181-244 Mix color changing effect
245-255 Sound control
13
Macro
Speed
0-255 Speed of Macro effect from fast to slow
14 Speed 0-255 Speed of PAN/TILT
15 Reset
0-244 CH1-CH14 valid
245-255 Rest after 3 seconds
5.
5.
5.
5. DMX-512
DMX-512
DMX-512
DMX-512 control
control
control
control connections
connections
connections
connections
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to
the male 3-pin XLR input of the moving head. You can chain multiple
Moving head together through serial linking. The cable needed should be two core, screened cable with
XLR input and output connectors. Please refer to the diagram below.
DMX-512 connection with DMX terminator
For installations where the DMX cable has to run a long distance or is in an electrically noisy
environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in
preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply an
XLR plug with a 120 Ω resistor connected between pins 2 and 3,which is then plugged into the output
XLR socket of the last fixture in the chain. Please see illustrations below.
1
1
1
1
2
2
2
2
3
3
3
3
PIN 3
PIN 3
PIN 3
PIN 3
PIN 2
PIN 2
PIN 2
PIN 2
120
120
120
120 Ω

6.
6.
6.
6. Menu
Menu
Menu
Menu Operations
Operations
Operations
Operations
Address DMX Address Set 001-XXX
RunMode DMX 15CH
Auto Auto 1
...
Auto 8
Sound
TestMode PAN 000-255
TILT 000-255
RED 000-255
GREEN 000-255
BLUE 000-255
WHITE 000-255
Language Chinese
English
SetUp IDCode 000-025
PAN Reverse ON/OFF
TILT Reverse ON/OFF
Handspike Delay ON/OFF
Signal Link ON/OFF
Code Wheel ON/OFF
Temp Switch Set ON/OFF
Temperature Set
50 ℃- 120 ℃
Fan Speed 000-255
Screen Protect OFF/Mode 1/Mode 2
Screen Rot ON/OFF
LOGO ON/OFF
Factory Set
YES ？
Reset YES ？
SysInfo On Time xxH xxM xxS
Run Time xxxxxH xxM
Ver HY-LM2C4 D303
Running Mode DmxMode
DMX Address xxx
Temperature xxx