Colorful H610M-E M.2 V20 User manual

H610M-E M.2 V20
PS/2
+
2*U2.0
HDMI
VGA
2*U2.0
LAN
+
2*U3.1G1
AUDIO
LGA 1700
DDR4 DIMM1 DDR4 DIMM2
BATTERY
M.2
PCIe3.0
22422280
PCIe 4.0×16
R
Intel
H610
CPU_FAN1
AIO_PUMP
CPU_8P
JPS2
ATX_PWR
FUSB3.0
PCIe 3.0×1
F_AUDIO JME
CHA_FAN1CHA_FAN2 ESPI_HEADER COM FUSB2.0_1 F_PANEL
SPEAK
JBIOS
SATA_3 SATA_2 S ATA_1
SATA_4
3
2
1
4
5
67
8
9
CLR_ CMOS
10
1311
12
14
Product Features
Intel H610 chipset,Supports 13th/12th Gen Intel® Core™ Processors, Pentium®
Gold and Celeron® Processors.
There is 1 PCIe 4.0 x16 slot，1 PCIe 3.0 x1 slot and 1 M.2 SSD slot on this
motherboard, easily meet your expansion needs.
There are 6 USB ports at the rear, and 4 USB ports at the front can be expanded,
which can be connected to various devices at the same time.
With Gigabit LAN (1000M) and a 5.1-channel audio which provides excellent
performance and experience.
Motherboard User Manual

Package Details
Please check if all thestandard accessories listed below are complete or not when
opening the packaging box of the motherboard.
Motherboard 1×H610M-E M.2 V20 motherboard
Connecting cable 2×SATA 6Gb/s cable
Other accessories 1×Rear Panel I/O Bezel
1×Motherboard driver installation CD
User manual 1×User manual for motherboard
Rear I/O Interface
(*Note: The blue in the audio interface is the audio input, the green is the audio output,
and the pink is the microphone interface)
Hardware Installation
You can scan the QR code on the right to obtain the official quick
operation guide for hardware installation provided by Colorful to
install it onto your PC quickly.
PS/2
interface
HDMI
interface
USB 3.1
Gen 1
Type-A
USB2.0
Audio
interface
*
USB2.0
VGA
interface
1G network
interface

Product Specification
Chipset Intel® H610
CPU
Supports 13th Gen and 12th Gen Intel Core™, Pentium® and Celeron® processors
that fit the LGA 1700 slot of the motherboard
*Please visit the official website of Colorful (www.colorful.cn) for the latest supported
processor list
Memory
2 DDR4 memory slots, supporting up to 64 GB of memory (a single slot can
support a capacity of up to 32 GB)
●Support DDR4-3200/2933/2666/2400MHz memory
●Support dual channel memory technology
*Please visit the official website of Colorful (www.colorful.cn) for the latest memory
compatibility list
Expansion slots 1×PCIe 4.0 x16 slot
1×PCIe 3.0 x1 slot
Storage device
interfaces
A total of 1 M.2 slot and 4 SATA 6Gb/s hard disk interfaces are supported
●M.2 slot：support 2242/2280 specifications M.2 SSD
(PCIe 3.0 x4, PCH channel)
Audio High fidelity decoding chip
●Support up to 5.1 channels
Network function RTL8111H Gigabit LAN controller
Rear I/O interfaces
4×USB 2.0 interfaces
2×USB 3.1 Gen 1 Type-A interfaces
1×HDMI 2.0 interface, up to 4K 60Hz resolution supported
1×VGA interface
1×PS/2 interface
1×Gigabit network interface
3×audio interfaces (audio input/audio output/microphone)
Onboard
pin/jumper/key
1×CPU fan pin (CPU_FAN)
2×system fan pins (CHA_FAN1、CHA_FAN2)
1×Water cooling pump pin (AIO_PUMP)
1×front audio pin (F_AUDIO)
1×front panel pin (F_PANEL)
1×speaker pin (SPEAK)
1×COM port pin (COM)
1×Clear CMOS jumper (CLR_CMOS)
1×ME write protection jumper (JME)
1×BIOS burner pin (JBIOS)
1×POST card pin（ESPI_HEADER）
1×wake-up control jumper (JPS2)

Front
USB expansion
interfaces
1×USB 2.0 pin, support additional 2 USB 2.0 Type-A interfaces (FUSB2.0)
1×USB 3.1 Gen 1 pin, support additional 2 USB 3.1 Gen 1 Type-A interfaces
(FUSB3.0)
Dimension of
motherboard
M-ATX Form Factor
225mm x 194mm
Pins and Jumpers
1 CPU fan pin (CPU_FAN)
There is one 4-pin CPU fan pin on the motherboard. The socket comes
with a foolproof design, and the correct direction must be checked before
installation. The cooling fan with a speed control function can reduce the
temperature of the CPU and provide cooling function,improve CUP stability.
2 System fan pin (CHA_FAN1、CHA_FAN2)
The motherboard provides two 4-pin system fan sockets which has
foolproof design and please pay attention to the direction when
installing.The cooling fan with the rotating speed control function can
lower the temperature in the chassis and help the chassis to dissipate
heat.
3 Water cooling pump pin (AIO_PUMP)
There is one 4-pin water cooling pump pin on the motherboard. The
socket comes with a foolproof design, and the correct direction must
be checked before installation. This pin is used to connect the power
connector of an integrated water-cooling CPU radiator water pump.
4 Front USB 2.0 pin (F_USB2.0)
There is one front USB 2.0 expansion pin on the motherboard, which can be
expanded to two USB 2.0 interfaces.

5 Front USB 3.1 Gen 1 pin (F_USB3.0)
There is one front USB 3.1 Gen 1 expansion pin on the motherboard, which
can be expanded to two USB 3.1 Gen 1 Type-A and it's compatible with USB
2.0 devices.
6 Front audio pin (F_AUDIO)
The audio interface on the front panel of the case can be connected to
the front audio pin through the audio cable in the case, allowing audio
input/output and other functions through the audio interface on the front
panel.
7 Front panel pin (F_PANEL)
PWR_Switch：Power switch，short connect to be power on.
Reset_Switch：Restart switch, short connect to restart the computer.
PWR_LED：Power indicator.The LED will light up when the power is on.
HD_LED： Hard disk indicator. The LED will light up when the hard disk
is accessing data.
8 Speaker pin (SPEAK)
Speaker pin can be used to connect speakers located in the case.
9 COM port pin (COM)
The COM port pin can be used to connect the COM port module. First,
connect the data cable of the COM port module to the COM port pin, then fix
the module in the vacant slot on the rear panel of the case to connect the
COM port device.
10 Clear CMOS jumper(CLR_CMOS)
Clear CMOS jumper can be used to clear data in the CMOS memory of the motherboard. In
CMOS memory it stores the BIOS setting parameters and is powered by the battery on the
main board independently. If you need to clear CMOS data, first turn off the computer and
unplug the power cord, insert the jumper cap onto the CMOS pin, and make the two pins
Short connect the feet for 5 seconds, then pull out the jumper cap, wait for 5
minutes, and then start the computer to enter the BIOS Reset BIOS parameters

11 ME write protection jumper (JME)
The ME write protection jumper is used to control whether the BIOS
firmware can be written. When the ME jumper is short-circuited, the BIOS
write protection function is disabled. At this time, the BIOS can be updated.
12 BIOS burner pin (JBIOS)
BIOS burner pins can be used to upgrade the motherboard BIOS by connecting to the BIOS
burner.
13 POST card pin（ESPI_HEADER）
The pin of the diagnosis card can be used to connect the diagnosis card of the main board
and analyze the cause of the main board fault according to the code displayed on the
diagnosis card
14 wake-up control jumper (JPS2)
The PS/2 wake-up control jumper can control whether the PS/2 interface
can use the PS/2 wake-up function in the BIOS. When the motherboard jumper
cap is inserted at pin ① and pin ②, the PS/2 wake-up function is in the hardware
disabled state,regardless of BIOS cannot be waked up using PS/2 device when
it is turned on or off.When the motherboard jumper cap is inserted in pin ②
And pin ③, the hardware supports PS/2 wake-up function. Turn on PS/2
wake-up in BIOS, you can use the system wake-up function normally through
the PS/2 keyboard and mouse.

Driver Installation
The motherboard driver installation CD-ROM is included in the package of the
motherboard. You can open the driver installation program in the CD-ROM to quickly
install the onboard network adapter, sound card, and chipset drivers. You can also visit
the official website of Colorful (http://www.colorful.cn), search for the product model,
and find the corresponding driver in the technical support list to download. The onboard
LAN Driver can also be downloaded by scanning the QR code below.
H610M-E M.2 V20
BIOS
During computer startup or restart, when the Press DEL to run Setup message is
displayed on the screen, press <Delete> to enter the BIOS setting.
If the POST program has been executed and you still want to enter the BIOS program,
press the <RESET> key on the case to restart the computer or shut down the computer
and restart the computer to enter the BIOS program again.
● In normal cases, the default BIOS program Settings can meet the requirements
of most scenarios. Do not change the default BIOS Settings unless necessary.
● To learn more about BIOS Settings, scan the QR code
on the right to download the official BIOS user manual
of Colorful.

Service and Support
Please visit the official website of Colorful, click the Service and
Support, or directly scan the QR code on the right, you can check
our services, warranty regulations and download support
provided by Colorful.
Shenzhen Colorful Yugong Technology Development Co., Ltd.
Official website: https://www.colorful.cn
Technical service hotline: [phone]
Address: 13th Floor, Building 1, Shenzhen New Generation Industrial Park, No. 136, Zhong
kang Road, Meidu Community, Meilin Street, Futian District, Shenzhen
Copyright and Notice:
The copyright of this motherboard manual belongs to Colorful. Colorful does not guarantee
the complete accuracy of the content of this manual. In case of any ambiguity caused by
typographical or language errors, Colorful reserves the right to final interpretation and
modification. The trademarks and names mentioned in the manual belong to the companies
that have registered legally.