COMAC INNOVA 55B User manual

USE AND MAINTENANCE MANUAL
INNOVA 55B
ED. 03-2013 EN
ORIGINAL
INSTRUCTIONS
Doc. 10035670
AC Version

The descriptions contained in this document are not binding.
The company therefore reserves the right to make any modifications at any time to elements,
details, or accessory supply, as considered necessary for reasons of improvement or
manufacturing/commercial requirements.
The reproduction, even partial, of the text and drawings contained in this document is prohibited
by law.
The company reserves the right to make any technical and/or supply modifications. The images
are for reference purposes only, and are not binding in terms of design and supply.
Symbols used in the manual
Open book symbol with an "i"
Indicates the need to consult the instruction manual
Open book symbol
Used to tell the operator to read the manual before using the machine
Warning symbol
Carefully read the sections marked with this symbol and observe the
indications, for the safety of the operator and the machine
Warning symbol
Indicates danger of gas exhalation and leakage of corrosive liquids
Warning symbol
Indicates operator should take safety measures to avoid damage to limbs.
Warning symbol
Indicates the danger of fire.
Do not go near with free flames
Warning symbol
Indicates that the packed product should be handled with suitable lifting
means that comply with the legal requirements
Disposal symbol
Carefully read the sections marked with this symbol for machine disposal

3
CONTENTS
ON CONSIGNMENT OF THE MACHINE.............................................................................................................................................5
SERIAL NUMBER PLATE.................................................................................................................................................................5
INTRODUCTORY COMMENT............................................................................................................................................................ 5
INTENDED USE ...............................................................................................................................................................................5
TECHNICAL DESCRIPTION..............................................................................................................................................................6
SYMBOLS USED ON THE MACHINE ................................................................................................................................................7
GENERAL SAFETY REGULATIONS .................................................................................................................................................8
MACHINE PREPARATION................................................................................................................................................................9
1. HANDLING OF THE PACKED MACHINE..........................................................................................................................................9
2. HOW TO MOVE THE MACHINE .....................................................................................................................................................9
3. INSTRUMENT PANEL ELEMENTS................................................................................................................................................10
4. STEERING COLUMN ELEMENTS.................................................................................................................................................10
5. FOOTBOARD ELEMENTS...........................................................................................................................................................10
6. SIDE MACHINE ELEMENTS........................................................................................................................................................11
7. REAR MACHINE ELEMENTS.......................................................................................................................................................11
8. FRONT MACHINE ELEMENTS.....................................................................................................................................................12
9. TYPE OF BATTERY...................................................................................................................................................................12
10. BATTERY MAINTENANCE AND DISPOSAL..................................................................................................................................12
11. HANDLING - INSERTING BATTERIES.........................................................................................................................................13
12. BATTERY CONNECTION AND BATTERY CONNECTOR.................................................................................................................14
13. BATTERY CHARGER CONNECTION (VERSIONS WITHOUT BC).....................................................................................................14
14. BATTERY CHARGER CONNECTION (VERSIONS WITH BC) ...........................................................................................................15
15. BATTERY CHARGE LEVEL INDICATOR......................................................................................................................................15
16. HOUR METER........................................................................................................................................................................16
17. FORWARD WORK SPEED........................................................................................................................................................16
18. SOLUTION TANK....................................................................................................................................................................16
19. FILLING THE SOLUTION TANK..................................................................................................................................................17
20. REGULATING THE DETERGENT...............................................................................................................................................17
21. RECOVERY TANK...................................................................................................................................................................17
22. ASSEMBLING THE SQUEEGEE.................................................................................................................................................17
23. ADJUSTING THE SQUEEGEE INCLINATION................................................................................................................................18
24. ADJUSTING THE SQUEEGEE HEIGHT .......................................................................................................................................18
25. ASSEMBLING THE BRUSHES...................................................................................................................................................18
26. BLINKING LIGHT (OPTIONAL)...................................................................................................................................................19
27. EMPTY SOLUTION TANK DEVICE..............................................................................................................................................19
WORK...........................................................................................................................................................................................20
28. WORK...................................................................................................................................................................................20
29. "ECO" DEVICE........................................................................................................................................................................21
30. OVERFLOW DEVICE ...............................................................................................................................................................21
31. EMERGENCY BUTTON............................................................................................................................................................21
AT THE END OF THE WORK..........................................................................................................................................................22
32. AT THE END OF THE WORK.....................................................................................................................................................22
DAILY MAINTENANCE...................................................................................................................................................................24
33. CLEANING THE RECOVERY TANK............................................................................................................................................24
34. CLEANING THE RECOVERY TANK FLOAT..................................................................................................................................24
35. CLEANING THE SQUEEGEE.....................................................................................................................................................25
36. CLEANING THE SOLUTION TANK FILTER...................................................................................................................................25
WEEKLY MAINTENANCE...............................................................................................................................................................27
37. CLEANING THE VACUUM HOSE ...............................................................................................................................................27
38. CLEANING THE BRUSH...........................................................................................................................................................27
EXTRAORDINARY MAINTENANCE................................................................................................................................................28
39. REPLACING THE FRONT SQUEEGEE RUBBER...........................................................................................................................28
40. REPLACING THE REAR SQUEEGEE RUBBER.............................................................................................................................28
41. REPLACING THE BRUSH.........................................................................................................................................................28

4
TROUBLESHOOTING.....................................................................................................................................................................29
42. THE MACHINE DOES NOT START.............................................................................................................................................29
43. INSUFFICIENT WATER ON THE BRUSHES .................................................................................................................................29
44. THE SQUEEGEE DOES NOT DRY PERFECTLY ...........................................................................................................................29
45. THE MACHINE DOES NOT CLEAN WELL....................................................................................................................................29
46. EXCESSIVE FOAM PRODUCTION .............................................................................................................................................29
47. THE SUCTION MOTOR DOES NOT FUNCTION............................................................................................................................29
48. THE BRUSH MOTOR DOES NOT WORK.....................................................................................................................................29
DISPOSAL.....................................................................................................................................................................................30
CHOOSING AND USING THE BRUSHES.........................................................................................................................................31
EC DECLARATION OF CONFORMITY............................................................................................................................................32

5
On consignment of the machine
When the machine is consigned to the customer, an immediate check must
be performed to ensure all the material mentioned in the shipping
documents has been received, and also to check the machine has not
suffered damage during transportation. If this is the case, the carrier must
ascertain the extent of the damage at once, informing our customer service
office. It is only by prompt action of this type that the missing material can
be obtained, andcompensation for damage successfully claimed.
Serial number plate
Introductory comment
INNOVA 55B is a floor scrubbing machine which, by means of the
mechanical action of the rotating brush and the chemical action of a
water/detergent solution, can clean any type of flooring. As it advances, it
also collects any removed dirt as well as the detergent solution not
absorbed by the floor.
The machine must only be used for this purpose. Even the best
machines will only work well if used correctly and kept in good working
order. We therefore suggest you read this instruction booklet carefully
and read it again whenever difficulties arise while using the machine. If
necessary, remember that our customer assistance service (organised in
collaboration with our dealers) is always available for advice or direct
intervention.
Intended use
The scrubbing machine is designed exclusively for the professional
cleaning of surfaces and floors in industrial, commercial and public
environments. The machine is only suitable for use in closed - or at least
covered - locations.
The machine is not suitable for use in the rain, or under water jets. It is
FORBIDDEN to use the machine for picking up dangerous dusts or
inflammable liquids within places with a potentially explosive atmosphere.
In addition, it is not suitable as a means of transport for people or objects.

6
TECHNICAL DESCRIPTION UM INNOVA 55B
Working width mm 560
Squeegee width mm 705
Squeegee width optional mm 800
Working capacity, up to m2/h 2632
Disc brush No. / Ø mm 1 / 560
Disc brush rotations rpm 140
Brush motor V/W 24 / 450
Maximum pressure on the brushes kg 15
Traction motor V / W 24 / 300
Traction wheel (number / diameter / width) No. / (mm / mm) 2 / (225 / 64)
Maximum forward speed km/h 5
Maximum gradient with full load % 8
Vacuum motor No./(V/W) 1 / (24 / 310)
Suction vacuum mbar 700
Front elastic wheel (diameter / width) mm / mm 175 / 60
Solution tank l 65
Recovery tank l 75
Steering diameter mm 1980
Machine length mm 1265
Machine length with optional item-holder tray mm 1400
Machine height mm 1030
Machine height with optional blinking light kit mm 1070
Machine width (without squeegee) mm 600
Machine width (without squeegee) with optional tool-holder kit mm 620
Battery compartment (l x L x h) mm 362x354x290
Rated battery voltage V/Ah 12 / 105
Machine transport weight (machine + batteries) kg 190
Machine weight (empty and without batteries) kg 110
Gross weight in running order (machine + batteries + water + operator) kg 335
Sound pressure level (ISO 11201) - LpA dB (A) 63
Uncertainty - KpA dB (A) 1.4
Hand vibration level (ISO 5349) m/s2<2.5
Body vibration level (ISO 2631) m/s2<0.5
Vibration measurement uncertainty value 4%

7
SYMBOLS USED ON THE MACHINE
Main switch or key switch symbol
Used on the instrument panel, to indicate the key switch for machine operation on (I) or off (0)
Symbol denoting acoustic alarm
Used to indicate the acoustic alarm button
Symbol of the reverse movement selector
Used to indicate the button for engaging the reverse gear
Brush coupling/uncoupling symbol
Used to indicate the button that couples or uncouples the brush
ECO mode symbol
Used to indicate the button that activates the ECO mode of the machine
Symbol indicating the maximum temperature of the water used to fill the solution tank
Symbol indicating the position of the solution tank drain pipe
Symbol indicating the position of the recovery tank drain pipe
Indicates the maximum gradient

8
GENERAL SAFETY REGULATIONS
The regulations below must be carefully followed in order to avoid harm to the operator and damage to the machine.
WARNING:
Read the labels on the machine carefully. Do not cover them for any reason and replace them immediately if they become damaged.
The machine must be exclusively used by authorised, trained personnel.
Do not use the machine on surfaces with an inclination greater than the one shown on the plate.
The machine is not suitable for cleaning rough or uneven floors. Do not use the machine on slopes.
If the power supply cable of the battery charger is damaged, contact an Authorised service centre immediately.
In the event of danger, quickly press the emergency button on the command panel.
For all maintenance interventions, switch off the machine and disconnect the battery connector and/or the power supply cable.
Children must be supervised to ensure they do not play with the device.
During the working of the machine, pay attention to other people and especially to children.
Only use the brushes supplied with the machine, or those specified in the "CHOOSING AND USING THE BRUSHES" paragraph of the instruction
manual. The use of other brushes could compromise safety levels.
WARNING:
The machine is not suitable for use by children and persons with reduced physical, mental and sensory capabilities, or people who lack experience and
knowledge.
The machine must not be used or stored outdoors, in damp conditions or directly exposed to rain.
The storage temperature must be between -25C and +55C; do not store outdoors in damp conditions.
Conditions of use: room temperature between 0°C and 40°C with relative humidity between 30 and 95%.
The socket for the machine's power cable (electric version) or for the battery charger power cable (battery version) must be correctly earthed.
Adapt the speed to the adhesion conditions.
Do not use the machine as a means of transport.
The machine does not cause harmful vibrations.
Do not use the machine in an explosive atmosphere.
Do not vacuum inflammable liquids.
Do not use the device to collect dangerous powders.
Do not mix different types of detergent as this may produce harmful gases.
The machine is not suitable for cleaning carpets.
Do not place any liquid containers on the machine.
Avoid working with the brushes when the machine is standing still, so as not to damage the floor.
In the event of a fire, use a powder extinguisher. Do not use water.
Do not knock against shelving or scaffolding, where there is a danger of falling objects. The operator must always be equipped with the appropriate
safety devices (gloves, shoes, helmet, goggles, etc.).
The machine is designed to carry out the scrubbing and drying operations simultaneously. Different operations should only be carried out in areas
where the passage of unauthorised persons is prohibited. Signal the presence of damp floors with suitable signs.
If the machine does not work properly, check this is not caused by failure to carry out routine maintenance. Otherwise, ask for intervention of the
authorised technical assistance centre.
If you need to replace any components, request the ORIGINAL spare parts from an Authorised dealer and/or Retailer.
Restore all electrical connections after any maintenance interventions.
Before using the machine, check that all the hatches and covers are positioned as shown in this Use and Maintenance Manual.
Do not remove the guards that can only be removed with the aid of tools, except for maintenance work (see the relevant paragraphs)
Do not wash the machine with direct water jets or with pressurised water, nor with corrosive substances.
To prevent scaling in the solution tank filter, do not fill the tank with detergent solution many hours before using the machine.
Do not use acid or basic solutions that could damage the machine and/or harm people.
Have the machine checked by an authorised technical assistance centre every year.
When disposing of consumable materials, observe the laws and regulations in force.
When your machine has reached the end of its long working life, dispose of the materials it contains (especially oils, batteries and electronic
components) in an appropriate manner, taking into account that the machine itself was constructed using 100% recyclable materials.
The batteries must be removed from the machine before its disposal. The batteries must be disposed of in a safe manner, fully observing the laws and
regulations in force.

9
MACHINE PREPARATION
1. HANDLING OF THE PACKED MACHINE
The machine is contained in specific packaging with a pallet for the handling with fork trucks. The
packages cannot be placed on top of each other.
The total weight of the machine and packaging is 135kg
The dimensions of the packaging is as follows:
INNOVA 55B
A: 1200 mm
B: 660 mm
C: 1430 mm
A
CB
1. Remove the outer package
2. The machine is fixed to the pallet with wedges which block the wheels
3. Disengage the electronic brake, turn the lever (1) (on the rear right-hand side of the machine) clockwise
4. Remove the wedges
5. Use a chute to get the machine down from the pallet, pushing it backwards. Do not assemble the rear
squeegee before unloading the machine, and avoid violently jolting the brush head. To assemble the
squeegee, read the “ASSEMBLING THE SQUEEGEE” paragraph.
ATTENTION: During transportation, the electrical brake should not be engaged, the
machine will in any event, if the critical speed threshold is crossed, activate the
internal braking system of the chopper circuit board and will emit a warning noise.
6. Keep the pallet for any future transport needs
WARNING: If the product is delivered in cardboard containers, handle the packed
productwith suitablelifting means thatcomply withthe legalrequirements
WARNING: During this operation, check there are no people or objects near
the machine
2. HOW TO MOVE THE MACHINE
1. Check the solution tank and recovery tank are empty; if necessary, empty them
2. Check that the brush head and squeegee are in the raised position
3. Place it on a pallet using a chute
4. Check that the key switch is in the "0" position and remove the key
5. Secure the machine to the pallet using wooden wedges
6. Engage the electronic brake
1

10
MACHINE PREPARATION
3. INSTRUMENT PANEL ELEMENTS
The instrument panel components are identified as follows:
1. Level indicator for battery/hour meter
2. Horn button
3. Reverse button
4. Brush coupling/uncoupling button
5. "ECO" function button
4. STEERING COLUMN ELEMENTS
The elements on the left side of the steering column are:
6. Squeegee body lifting lever
7. Brush head body lifting lever
8. Detergent solution adjustment lever
9. Main key switch
5. FOOTBOARD ELEMENTS
The components on the front right part of the footboard are:
10.Drive pedal
1
2
3
4
8
6
7
9
10
5

11
MACHINE PREPARATION
The components on the rear part of the footboard are:
11.Emergency button
12.Detergent solution level tube
13.Recovery tank release button
6. SIDE MACHINE ELEMENTS
The elements on the left-hand side of the machine are:
14.Fast water-detergent filling cap
15.Water-detergent filler cap
16.Handle support kit (optional)
7. REAR MACHINE ELEMENTS
The elements on the rear of the machine are:
17.Recovery tank cover
18.Blinking light (optional)
19.Recovery tank drain pipe
20.Squeegee vacuum tube
12
11
13
16
17
18
19
20
14 15

12
MACHINE PREPARATION
8. FRONT MACHINE ELEMENTS
The elements on the front of the machine are:
21.Item-holder tray
22.Storage compartment carter
23.Detergent solution filter
24.Detergent tank drainage tap
9. TYPE OF BATTER
Y
To power the machine it is necessary to use:
liquid-electrolyte lead traction batteries
sealed traction batteries with gas recombination or gel technology.
OTHER TYPES MUST NOT BE USED.
The batteries must meet the requirements laid out in the norms: CEI EN 60254-1:2005-12 (CEI 21-5) + CEI
EN 60254-2:2008-06 (CEI 21-7)
For a good operating performance, we suggest the use of two 12V - 105 Ah/C5 batteries
10. BATTERY MAINTENANCE AND DISPOSAL
For maintenance and recharging, respect the instructions provided by the battery manufacturer.
Particular attention must be paid when choosing the battery charger, if not supplied, since there are
different kinds according to the type and capacity of the battery.
When the battery reaches the end of its working life, it must be disconnected by expert, trained personnel
then removed from the battery compartment with the aid of suitable lifting devices. DEAD BATTERIES
A
RE CLASSIFIED AS DANGEROUS WASTE AND MUST BE DELIVERED TO THE AUTHORISED
BODIES FOR CORRECT DISPOSAL.
WARNING: You are advised to always wear protective gloves, to avoid the risk
of serious injury to your hands.
WARNING: You are advised to only lift and move the batteries with lifting and
transportation means suitable for the specific weight and size
21
22
23
24

13
MACHINE PREPARATION
11. HANDLING - INSERTING BATTERIES
The batteries must be housed in the special compartment beneath the seat carter. They should be handled
using lifting equipment that is suitable in terms of both weight and coupling system. They must also satisfy
the requirements of Standard CEI 21-5. The dimensions of the battery compartment are: 362mm x 354mm
x
H290mm.
WARNING: For battery maintenance and daily recharging, you must carefully
follow the instructions provided by the manufacturer or retailer. All installation
and maintenance operations must be carried out by specialised personnel.
WARNING: You are advised to use airtight batteries only, to avoid the leakage
of acids!
WARNING: You are advised to always wear protective gloves, to avoid the risk
of serious injury to your hands.
To insert batteries proceed as follows:
1. Check the main switch is in the “0” position, if this is not the case, turn the key by a quarter of a turn to
the left.
2. Lock the machine by activating the electronic brake, then turn the lever (1) (on the rear right-hand side
of the machine) anticlockwise
3. Make sure the recovery tank is empty, otherwise empty it completely
4. Press the button (2) to release and rotate the recovery tank
5. Grip the recovery tank and rotate it as far as it will go
ATTENTION: You are advised to only lift and move the batteries with lifting
and transportation means suitable for the specific weight and size
6. House the batteries in the compartment, positioning the poles “+” and “-“ opposite each other
1
2

14
MACHINE PREPARATION
12. BATTERY CONNECTION AND BATTERY CONNECTO
R
1. Connect the batteries in series to the "+" and "-" poles using the supplied jumper cable
2. Connect the battery connector cable to the "+" and "-" poles in order to obtain the terminal voltage of 24V
3. Connect the battery connector cable (2) to the machine connector (1)
4. Rotate the seat support until it is in the working position
WARNING: All installation and maintenance operations must be carried out by
expert personnel, trained at the specialised assistance centre
13. BATTERY CHARGER CONNECTION (VERSIONS WITHOUT BC)
In order not to cause permanent damage to the batteries, it is essential to avoid their complete discharge:
arrange the recharge within a few minutes of the switching on of the "discharged batteries" blinking light.
WARNING: Never leave the batteries completely discharged, even if the
machine is not being used. Check the battery charger is suitable for the
batteries installed, in terms of both capacity and type.
To connect the battery charger you must:
1. Move the machine near to the battery charger
2. Make sure the recovery tank is empty, otherwise empty it completely
3. Check the key switch is on “0”; if this is not the case, turn the key of the mainswitch anticlockwise to “0”
4. Press the button (1) to release and rotate the recovery tank
5. Grip the recovery tank and rotate it as far as it will go
The coupling connector of the battery charger is supplied inside the bag containing this instruction booklet,
and must be fitted to the battery charger cables as shown in the instructions.
WARNING: This process must be carried out by qualified personnel. An
incorrect connection of the connector may cause problems with machine
functioning.
6. Disconnect the electric system connector from the battery connector
7. Connect the battery charger cable to the battery connector
8. Close the recovery tank until the gas spring (2) is resting on the solution tank
9. Connect the recently wired cable to the external battery charger
WARNING: Carefully read the use and maintenance instructions of the battery
charger that is used for charging.
WARNING: Keep the recovery tank open for the duration of the battery
recharging cycle to allow gas fumes to escape
10. After the charging cycle is complete, the battery connector must beconnected to the machine connector
1
2

15
MACHINE PREPARATION
WARNING: Danger of gas exhalation and leakage of corrosive liquids.
WARNING: Danger of fire: do not go near with free flames
14. BATTERY CHARGER CONNECTION (VERSIONS WITH BC)
In order not to cause permanent damage to the batteries, it is essential to avoid their complete discharge:
arrange the recharge within a few minutes of the switching on of the "discharged batteries" blinking light.
WARNING: Never leave the batteries completely discharged, even if the
machine is not being used. Check the battery charger is suitable for the
batteries installed, in terms of both capacity and type.
To connect the battery charger you must:
1. Move the machine near to the battery charger
2. Check the key switch is on “0”; if this is not the case, turn the key of the mainswitch anticlockwise to “0”
3. Press the button (1) to release and rotate the recovery tank
4. Grip the recovery tank and rotate it until the gas spring (2) is resting on the solution tank
WARNING: This process must be carried out by qualified personnel. An
incorrect connection of the connector may cause problems with machine
functioning.
5. Connect the battery charger cable to the socket on the charger itself
6. Plug the battery charger cable into the mains socket.
The battery charger power cable is delivered inside the bag containing this instruction booklet.
WARNING: Carefully read the use and maintenance manual of the charger
that is delivered inside the bag containing this instruction booklet.
WARNING: Before inserting the charger power cable into the socket, verify
that there is no condensate or other forms of liquids.
WARNING: if the machine's electric system is accidentally powered (by
turning the main switch to ON), the commands display will show “BATTERY-
CHARGER” and no steering wheel command will function.
15. BATTERY CHARGE LEVEL INDICATO
R
On the instrument panel of the machine there is a monitor (1) indicating (amongst other things) the battery
charge status. If the lower line contains ten light indicators, the battery charge level is 100%. If the battery
charge percentage is at 00% and flashing, this means the batteries are discharged.
1
2
1

16
MACHINE PREPARATION
WARNING: a few seconds after the battery charge level reaches 20%, the brush
motor switches off automatically. With the remaining charge it is still possible,
however, to complete the drying process before recharging
WARNING: a few seconds after the batterycharge level reaches 10%, the vacuum
motor switches off automatically. With the remaining charge, it is still possible,
however, to move the machine to the location designated for its recharging
16. HOUR METER
On the machine's instrument panel there is a display (1) indicating the total machine usage time. The top
line shows the hours and minutes of functioning. The flashing “:” symbol Indicates that the hour meter is
counting the machine functioning time.
17. FORWARD WORK SPEED
This machine is equipped with electronic traction control. To move the machine, turn the key to “I” then
press the drive pedal (1), adjusting the speed by altering the degree of pressure on the pedal.
ATTENTION! The machine will not start to move (either forwards or backwards) if the
electrical brake is not engaged. In this case, you will see "ELECTRICAL BRAKE?" on
the command display.
To move the machine backwards, press the button (2) on the instrument panel, then immediately press the
pedal (1). Adjust the speed by altering the degree of pressure on the pedal.
WARNING! The reverse speed is lower than the forward speed to comply with current
health and safety standards.
ATTENTION! The machine will not start to move in reverse if the squeegee is lowered.
18. SOLUTION TANK
The recovery tank must be completely empty each time the solution tank is filled.
Remove the inlet cap (1) located on the left side of the machine.
WARNING: The recovery tank must be completely empty each time the
solution tank is filled.
Check that the solution filter cap (2), under the solution tank in the front right of the machine, is properly
closed.
Check that the solution tank drainage tap (3) (under the solution tank in the right part of the brush head
body) is well closed.
2
1
1
2
3
1

17
MACHINE PREPARATION
19. FILLING THE SOLUTION TANK
The solution tank can be filled in two different ways:
1. removing the inlet cap (1) and filling with the aid of a rubber tube
2. using the rubber cap (2); this supports the water hose on its own, but be sure to remove the inlet cap
(1) to allow the proper vent of air.
Remove the inlet cap (1) and fill with clean water at a temperature of not more than 50C. The amount
inside the tank can be seen by means of the level pipe on the front left of the seat. The solution tank has a
maximum capacity of about 65 litres. Add the liquid detergent to the tank in the concentration and manner
indicated on the detergent manufacturer's label. The formation of excess foam could damage the vacuum
motor, so use only the minimum amount of detergent that is necessary.
WARNING: Always use detergents whose manufacturer's label indicates their
suitability for scrubbing machines. Do not use acid or alkaline products or
solvents without this indication. Acid or alkaline maintenance detergents can
be used, as long as they have pH values between four and ten, and do not
contain oxidising agents, chlorine or bromine, formaldehyde, mineral solvents.
WARNING: protective gloves should always be worn before handling
detergents or acidic or alkaline solutions to avoid serious injury to hands.
ATTENTION: always use low foam detergent. To avoid the production of
foam, before starting to clean, put a minimum quantity of anti-foam liquid into
the recovery tank. Do not use pure acids.
20. REGULATING THE DETERGENT
Firstly, fully open the outflow of the tap, by means of the lever (1) on the steering column. During the first
few metres, check that the amount of solution is sufficient to wet the floor. The amount can be adjusted by
means of the lever (1), shifting it downwards to increase the flow, or upwards to reduce it. Bear in mind that
the correct amount of solution is always depends on the nature of the floor, the degree of dirt and the
forward speed.
21. RECOVERY TANK
Make sure the recovery tank is empty, otherwise empty it completely.
Check the cap of the drainage tube (1) (on the rear of the machine) is correctly closed.
22. ASSEMBLING THE SQUEEGEE
The squeegee, that for reasons of packaging comes disassembled from the machine, must be assembled
while assembling the machine. Proceed as follows for assembly:
1. Lift the squeegee, turning the left-hand lever (1) to move it clockwise
2. Turn the main switch key anticlockwise to the "0" position
2
1
1
1
1

18
MACHINE PREPARATION
3. Remove the key from the instrument panel
4. Loosen the knobs (2) and (3) in the squeegee pre-assembly
5. Insert the left-hand squeegee pin in the left-hand slit of the squeegee connection, then tighten the knob
(2), making sure the washer and spring adhere in the upper part of the squeegee support
6. Insert the right-hand squeegee pin in the right-hand slit of the squeegee connection, then tighten the
knob (3), making sure the washer and spring adhere in the upper part of the squeegee support
7. Insert the vacuum hose (4) in the squeegee sleeve
ATTENTION: these operations must be carried out using protective gloves to
avoid any possible contact with the edges or tips of metal objects.
23. ADJUSTING THE SQUEEGEE INCLINATION
During working operation, the rear rubber is slightly tilted backwards (by about 5mm) in a uniform way for
its whole length. If you need to increase the bend of the rubber in the central part, you must tilt the
squeegee unit. To do this, proceed as follows:
1. Loosen the locknut (1)
2. Turn the screw (2) clockwise to increase the bend of the rubber in the central part of the squeegee.
3. When fully adjusted, fix the locknut (1)
24. ADJUSTING THE SQUEEGEE HEIGHT
The height of the squeegee must be adjusted on the basis of the state of wear and tear of the rubber.
Carry out the following operations for adjustment:
1. Loosen the locking nuts (1)
2. Raise or lower the wheels (2) by sliding them in the slot on the squeegee support
3. Block it by tightening the locking nuts (1) once the required height is reached.
NB: to facilitate the operation, completely lower the squeegee and put a spacer of a few millimetres (2 to 4
mm depending on the type of rubber) under the wheel.
25. ASSEMBLING THE BRUSHES
To assemble the brushes of the brush head body, proceed as follows:
1. Lift the brush head by turning the right lever (1) to move the brush head anticlockwise
2. Turn the main switch key clockwise to the "1" position
WARNING: During this operation, check there are no people or objects near the
brush.
1
2
2
3
4
1
1
2

19
MACHINE PREPARATION
3. Position the brush on the floor, near the machine brush head
4. Lower the brush head, turning the right-hand lever (1) to move it clockwise.
5. Press the brush release button (2) intermittently
WARNING: During this operation, check there are no people or objects near
the brush.
ATTENTION: Check the brush is correctly inserted. If this is not the case, the
machine could move in an irregular, sudden manner.
26. BLINKING LIGHT (OPTIONAL)
The machine can be equipped with a blinking light that turns on automatically when the key in the main
switch is turned on.
27. EMPTY SOLUTION TANK DEVICE
To check the quantity of water in the solution tank there is a suitable level indicator tube (1) placed in front
of the driver seat.
1
2

20
WORK
28. WORK
Before beginning to work, it is necessary to:
1. make sure the recovery tank is empty, otherwise empty it completely
2. check the key switch (3) is on “0”; if this is not the case, turn the key of the main switch anticlockwise
to “0”
3. connect the battery connector (2) to the electric system connector (1)
4. Check the electronic brake (4) is engaged
5. sit on the driver’s seat
6. Turn the key of the main switch a quarter of a rotation clockwise (to position I). The display on the
instrument panel will immediately come on.
7.
A
t switch-on, three consecutive screens are displayed on the monitor. The first shows the machine
name on the top line. The program release number is shown on the bottom line.
8. The second screen shows the total functioning time on the top line. On the bottom line you can see
what battery technology has been set for machine operation; in this case it is gel batteries (to set
another type of battery - for instance acid - contact the qualified assistance centre personnel).
9. The third and last screen (known as “work”) displays the battery charge status and the total
functioning time. When the batteries supplied are fully charged, the bottom line contains ten light
indicators that represent a battery. As the batteries gradually run down, the indicators go out and,
with the batteries completely run down, only the battery outline flashes. The top line indicates the
hours and minutes of functioning. The flashing “:” symbol Indicates that the hour meter is counting
the machine functioning time.
10.Move the tap lever (5) downwards and adjust to the desired solution quantity
11.Lower the brush head by turning the right lever (6) clockwise, then lower the squeegee turning the left
lever (7) anticlockwise.
WARNING: As soon as the forward movement pedal is activated with the brush
head in its work position, the solenoid valve will start working and will begin
dispensing detergent solution. As soon as the squeegee is in its work position,
the vacuum motor will switch on and being working.
12. Press the accelerator pedal (8) to start moving the machine
WARNING: To stop the machine, remove your foot from the accelerator (8). The
machine will begin to stop.
4
5
7
6
8
3