Comelit HDCAM502A User manual

HD-SDI BOX CAMERA, 2 MEGAPIXEL
ART. HDCAM502A
Please read this manual thoroughly before use, and keep for future reference
Via Don Arrigoni, 5 24020 Rovetta S.Lorenzo (Bergamo)
http://www.co elitgroup.co e-mail: export.depart ent@co elit.it

2
SAFETY PRECAUTIONS
Please read before using
1. Please read the service manual in details before using.
2. Don't try to disassemble the chassis or the part easily, in case that touch the power by
mistake, is shocked by electricity the danger or caused inside parts to be damaged,
3. Do not attempt to service this unit yourself unless you are authorized to do so. Opening
cover may exposure you to dangerous voltage or other hazards. Refer all servicing to
qualified personnel only.
4. When being regular, please lock the parts firmly first to prevent the machine damage.
5. Please connect correctly in accordance with the regulation, prevent the machine from
using, or striking improperly.
6. Please don't use any organic solution or the corrosively sanitizer to insert and wipe away
the chassis outside. While inserting and wiping away, please turn off the power, and use
the clean cloth is stained with letting a small amount of branch water, insert and wipe
away appearance.
7. Please don't use the camera under the following abominable environments: Temperature
is lower than -10 degrees Centigrade, or is higher than +50 degrees Centigrade.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of insulated dangerous Voltage within the
product’s enclosure that may be sufficient magnitude to
constitute risk of electrical shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operation and maintenance (servicing) instructions in the
literature accompanying the appliance.

3
Product Features
1. Full HD 1080p
2. SDI output.
3. CVBS Output.
4. Lens type: DC / Manual (C/CS mount).
5. 30x Sense-Up.
6. Picture-Effect: Mirror.
7. Smart NR.
8. 2DNR & 3DNR function (Digital Noise Reduce).
9. Defog function.
10. OSD menu language: English/ Chinese
11. OSD operation: buttons
12. 12 VDC input.

4
Key Features
 SDI output
Our camera provides high definition image up to 2 Megapixels via HD-SDI interface with
conventional coaxial connection. For best performance we recommend to use standard RG-59
cable.
 CVBS output
You could connect the camera directly to a monitor with AV port to see picture or connect to
standard DVR with analog recording.
 SENSE-UP up to 30x
Allow user selectable digital show shutter speed in order to allow extra brightness into a
camera thereby providing higher sensitivity in low light conditions.
 DEFOG
This function improves the clarity of images taken in poor conditions such as fog, smoke, rain
or snow. Applied to live or recorded color video, it provides real time results and displays visual
details that would normally have been difficult to distinguish

5
Specifications
Pick up device 1/3” CMOS Panasonic 2 Megapixel
Resolution (H x V) 1920 x 1080 @ 30 fps
Video Output HD-SDI (BNC) / CVBS (RCA)
DEFOG OFF / Low / Middle / High
Lens Shading Compensation
OFF / ON
Lens Type DC / Manual (C/CS)
Electronic Shutter Auto 1/50 ~ 1/50,000 sec / Flk
Min. Illumination 0.02 Lux ( F1.2 , AGC ON)
ACCE (WDR) OFF / Low / Middle / High
AGC Low / High / OFF
BLC BLC / HSBLC / OFF
White Balance AWC-SET / MANUAL / INDOOR / OUTDOR / ATW
Camera Title ON / OFF
Day & Night Auto
SMART NR ON / OFF
2DNR & 3DNR ON / OFF
Sense-up ON / OFF (Selectable range 2x~ 30x)
Picture-Effect Mirror
OSD Control Button
Power Source 12 VDC ± 10% / 1A
Power Consumption 2.52 W
Current 210 mA (max)
Operating Temperature -10°C ~ 50°C (14°F ~ 122°F)
Storage Temperature -20°C ~ 70°C (-4°F ~ 158°F)
Dimensions (W x H x D) 56 x 50 x 125.7
Please use suitable adapter DC12V ± 10 %,1A. Otherwise, this product will be damaged.

6
MAIN MENU
1. LENS
DC Default
VIDEO N/A
LENS
MANUAL
Fixed or Varifocal lens can be installed on this camera.
Manual – Iris is adjusted manually
DC – Iris is adjusted automatically by the camera according to light conditions.
Notice: we recommend using high quality megapixel lens in order to get the best result in
term of picture.
2. EXPOSURE
SETUP
1. LENS DC
2. EXPOSURE 
3. WHITE BAL ATW
4. DAY&NIGHT AUTO
5. NR 
6. SPECIAL 
7. ADJUST 
8. RESET 
9. EXIT 
EXPOSURE
SHUTTER 1/60
AGC LOW
SENS-UP OFF
BRIGHTNESS ɩ ɩ ɩ ɩ ɩ ɩ |
||
| ɩ ɩ ɩ ɩ ɩ 060
ACCE OFF
DEFOG OFF
BACKLIGHT OFF
RETURN RET

7
EXPOSURE
SHUTTER 1/60, FLK, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000,
1/50000, x2, x4, x6, x8, x10, x15, x20, x25, x30, AUTO
AGC MIDDLE, HIGH, LOW
SENS-UP x2, x4, x6, x8, x10, x15, x20, x25,
x30
AUTO
RETURN RET
SENS-UP
OFF
BRIGHTNESS 0~100
ACCE OFF, LOW, MIDDLE, HIGH
DEFOG OFF, LOW, MIDDLE, HIGH
OFF
GAIN MIDDLE, HIGH, LOW
AREA POSITION SIZE,RET,
AGAIN
DEFAULT
BLC
RETURN RET
SELECT AREA1, AREA2, AREA3, AREA4
DISPLAY ON, OFF
LEVEL 0~100
MODE ALL, DAY, NIGHT
BLACK MASK ON, OFF
DEFAULT
BACKLIGHT
HBLC
RETURN RET
RETURN RET
SHUTTER
AES (auto electronic shutter) - the camera automatically sets the optimum shutter speed.
FLK - flickerless mode, avoids interference from light sources (recommended for video-iris or
DC-iris lenses only).
FIXED - forces a fixed shutter speed.
AGC
Regulate the gain or amplification of the video signal, mainly used in low-light conditions with the iris
fully open.
Can be used only when DAY&NIGHT is not set to AUTO.
SENSE-UP
Allow user selectable digital show shutter speed in order to allow extra light into a camera thereby
providing higher sensitivity in low light conditions.

8
ACCE (DWDR)
Stand for Adaptive Contrast and Color Enhancement which is equivalent to Wide Dynamic Range
technique.
The contrast ratio of the image can be effectively expressed and the edge information can be
improved in order to enhance the overall visibility of the image.
DEFOG
Improves the clarity of images taken in poor conditions such as fog, smoke, rain or snow. Applied to
live or recorded color video, it provides real time results and displays visual details that would
normally have been difficult to distinguish.
3. WHITE BALANCE
WHITE BAL
ATW
AWCSET
INDOOR
OUTDOOR
BLUE 0~100
RED 0~100
MANUAL
RETURN RET
4. DAY & NIGHT
DAY&NIGHT
DELAY 0~60
N-D(AGC) 0~100
N-D(AGC) 0~100
AUTO
REURN
COLOR
BURST ON, OFF
IR SMART ON, OFF
IR LED ON, OFF
IR PWM 0~100
B/W
RETURN RET
EXT

9
5. NR
NR
2DNR OFF, ON
S-LEVEL 0~100
E-LEVEL 0~100
3DNR ON
RETURN RET
LEVEL 0~100
SMART NR ON, OFF
RETURN RET
SMART NR.
Avoid over exposure problem when the camera is focus on area with wall.
6. SPECIAL
SPECIAL
OFFCAM TITLE
ON 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ＜＞
CLR POS END
FREEZE OFF, ON
MIRROR OFF, MIRROR, V-FLIP, ROTATE
OFF
PIP OFF, ON
D-ZOOM x2.0~62.0
PAN&TILT D-ZOOM
DEFAULT
D-ZOOM
ON
RETURN
NEG. IMAGE OFF, ON
D-EFFECT
RETURN
OFF
SELECT AREA1, AREA2, AREA3
OFFDISPLAY
ON POSITION
SENSITIVITY 0~100
MOTION VIEW OFF, ON
DEFAULT
MOTION
ON
RETURN RET
OFFPRIVACY
ON SELECT ARE1~ARE8

10
DISPLAY ON / POSITION
COLOR 1~16
DEFAULT
RETURN RET
LANGUAGE ENG
LIVE DPC ON, OFF
LEVEL 0~60
STATIC DPC ON, OFF
START
LEVEL 0~60
SENS-UP x2, x4, x6, x8, x10, x15, x20
DEFECT
RETURN RET
CAM ID 0~255
OFFID DISPLAY
ON CAM001~CAM255
BAUDRATE 9600, 19200, 38400, 2400, 4800
RS485
RETURN RET, END
VERSION 110727
RETURN RET
6. ADJUST
ADJUST
SHARPNESS ON, 0FF
LEVEL 0~100(50)
RESOLUTION ON, OFF
SHARPNESS
RETURN RET
GAMMA USER, 0.45, 0.50, 0.55, 0.60,
0.65, 0.70, 0.75, 0.80, 0.85, 0.90,
0.95, 1.00
BLUE GAIN 0~100
RED GAIN 0~100
LCD
RETURN RET
BLACK LEVEL 0~30
BLUE GAIN 0~100
RED GAIN 0~100
MONITOR
CRT
RETURN
TEXT COLOR 1~8OSD
OUTLINE OFF, ON