Comer RX416 User manual

- RX416 -
Logistics Thermal Label Printer
http://www.kcomer.com
User Guide

Do you meet any question or concern? Most issues can be resol-
ved very quickly. Comer service support is available by E-mail.
Highly recommended:Watch the Quick Setup Video in the U disk
for your package or our
Website:http://www.kcomer.com
Our new item RX416 with fashional shape and best quality , can
works with any thermal direct label including express waybill , logist-
ics labels, commodity price tags, and various sizes of barcode labels
and so on. Help save time and money on label costs.
For the convenience of using the comer printer, please read the
following user guide carefully. if operate with a incorrect way may
result in damage to your printer or injury.
Warm Tip:

Package contents
/ RX416
USB Line
Power Cable
Adapter
Label Roll Holder
USB drive
Quick Installation Guide
Printer
Front View
Rear View
Inner View
Paper feed
Power Button
Power interface
USB interface
Air Vent
Printer Head Mechanism
Paper roll holder
Paper roller
Upper cover
Paper out button
Paper outlet
Uncap button pole

Cable Connection
/ RX416
Cable Connection
Power Cable
Connect PC mainframe
Adapter
Power offPower on

/ RX416
Face the back of the printer, hold down the paper
guide with both hands to adjust the guide space
according to the paper size.
Insert the thermal paper into the
paper guide.
Feed the thermal label into the paper
channel slowly, and the paper will aut-
omatically absorbed by detector.

/ RX416
/ RX416
Paper Jam
PRINTER SETUP
After pulling the stuck paper out of
the feed channel, replace it with a new
paper, Normal media installation can
be carried out after the stuck paper is
extracted.
Ensure the printer is OFF.
Facing the machine, press and hold the cover
keys on both sides to open the top cover.

Find the USB and Power port.
Connect the power cable and
USB cable.
Turn the power ON.

/ RX416
1.
2.
Pls ensure the printer ON, download the Mac driver and run the downloaded
software, prompt to complete installation.
MAC
Please download driver in USB disk or website，take U Disk for example.
Find the RX416 driver in the USB flash drive and save it to the desktop.

If it shows”pkg can't be opened because it is from unidentified developer”.
Pls allow the Mac to finish the installation.
3.
Go to the [Security&Privacy].4.

5.
Installer is trying to install new software.
Allow the driver open in the option pointed.
6.