Comet JK04 User manual
COMETINTERNATIONALCORPORATION
UserManual
ProductName:BLESPEAKERLIGHTING
ModelNo.:JK04,COMET01‐99,MAGIC01‐99,SOUND&LIGHT01‐99
Material Abs&PE
Lamppower<3W
LEDColorRed,Green,Blue&White
BLEModuleBluetoothqualifieddesign4.0
FrenuencyRange:2402MHz‐2480MHz
TransmissionRange10meters
SpeakerRatedpowerinput: 5Weach
SpeakerMaxPowerinput10W
FrenquencyResponseFO~20KHZ
InputpowerInputDC5V
RechargeableLi‐ionBattery3.7V
RemotecontrolInfrared
COMETINTERNATIONALCORPORATION
LAMPFUNCTION:
SWITCHonbase:
On/off:
Poweron:Redlighton&thespeakerwillfirstenterBluetoothmodewithasignalsound.
Poweroff:Cutthepowerconsumption
Mode:7StaticColorsetting/candlelight/colorchanging
Mode:7StaticColorsetting
Candlelight
Colorchanging
Sound‐sensitive:Colorchangingsynchronizewithsound/music.
BLUETOOTHMODE:
1. Bluetoothconnection:
ThisspeakersupportstheBluetoothdevicewithA2DPfunction.Pushthepowerswitchonfirst,
thenenterBluetoothmode.Bluetoothindicateblueflickeralternatelytogetherwithvoiceprompts,the
speakerisinimpairingstateatthismomentandonlyinthestateBluetoothcanbeimpairedand
connectedsuccessfully.
2. MOBILEPHONECONNECTION:
Step1:OpentheBluetoothsettingonyourphoneortabletandclick“searchdevice”iphonewill
searchforBluetoothdevicesautomatically.
Step2:YouhavefoundtheBluetoothspeakerwhenthescreendisplaysthe
Character”Sound&Light”clickonitinyourdevicetopairtheconnection.
COMETINTERNATIONALCORPORATION
BLUETOOTHPAIRINGTHECONNECTION
1. IfthespeakerhasbeenconnectedwithBluetoothdevicesbefore,itwillconnectwiththelast
Bluetoothdeviceautomaticallyonceitisturnedon.
2. IfthespeakerhasnotbeenconnectedwithBluetoothdevicesbefore,itwillenterimpairingmode.
Clickconnectingisachievable
3. OtherphonesortabletscannotbeconnectedwiththeBluetoothspeakerwhenthespeakeris
beingconnectedwithaphoneortablet.
4. ThephoneortabletcannotbeconnectedwiththeBluetoothspeakerifitisconnectedwithother
Bluetoothdevices.YoushouldturnoffyourBluetoothconnectionandconnectyourphonewiththe
Bluetoothspeakeragain.
Frequentlyaskedquestions
QUESTIONS SOLUTIONS
Unsuccessfulpairingand
connectionrepeatedly
1. Checkthespeakerandmakesureitisinthesearching
stateorrebootthespeaker
2. Connectionisdifficultwhentherearetoomany
Bluetoothdevicesnearby.TurnoffotherBluetooth
devices
3. TurnofftheBluetoothdevicethatwasconnectedwith
theBluetoothspeakerlasttime,andreconnectthe
speaker
Mutedordistorted
sound
1. Checkthevolumeofyourphoneorthespeaker,and
adjustthevolume
2. Thebatteryislow.Pleasechargeit.
Choppymusicplay1. Checkifthedeviceisbeyondtheeffectiveconnection
distance
2. Checkifthereisanyobstaclebetweenthespeakerand
yourdevice
Theindicatornotshining
inBluetoothmode
1. Thebatteryislow.Pleasechargeit
2. Pleaserebootthespeaker
COMETINTERNATIONALCORPORATION
FCC Part 15.19 Warning Statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
FCC Part 15.21 Warning Statement
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
FCC Part 15.105 Warning Statement
Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC's RF exposure guidelines, this equipment should be installed and operated with a
minimum distance of 20cm between the radiator and your body.
This manual suits for next models
3
