Comfort Zone 8259 Operating instructions

Touchscreen thermostat programming guide (8259)
www.comfortzone.co
[e-mail]
Watch the wiring guide
video on our website
1
5
4
3
2
6
7
°C
°C
°C
°C
Power button
Clock button/Backlight
Menu button
Down button
Up button
1 Toaccessadvancedsettingsswitchtheunitobytapping
the button.
2Then press and hold both the and button.
3Tap the button to switch to Sensor mode (2SEN) and
set to OUT
Before you start (Advanced settings)
8259hassomeadvancedsettingswhichmustbeconguredbefore
programming. These include Sensor Setup, Frost Protection &
Heating Schedule Options.
6 Tapthebuttontosetyour
programdays.
7Tap and to set the program
days.
8Program options include:
9 Switchotosaveyoursettingsusing
the button.
• Sevendayssame
• Fivedays&weekend
• Sixdayssame&1separateday
• Programo
Heating schedule options
Set the time and date
Yourheatingschedulecanbeconguredtosuitmostlifestyles.Theoptions
areMon–Fri(1-5)thesamewithSat–Sun(6-7)separate.Mon–Sat(1-6)
thesamewithSun(7)separateandAllDays(1-7)thesame.Youcanalso
switchotheheatingscheduleifyourequire.1-5dayssettingshave3
comfortperiods.6-7daysettingshas1comfortperiod.
Sensor mode
The8259hasthreesensorsettings.AirSensor(IN),FloorSensor(OUT)and
AirSensorwithFloorLimit(All).WerecommendFloorSensor(OUT)forthe
most accurate control.
AirSensor(IN) Floor Sensor (OUT) AirSensorwithFloor
Limit(All)
°C
°C
°C
°C
°C°C
°C°C
°C
1
5
4
3
2
6
7
°C
4 TapthebuttonuntilyouseeFrost
protectionmode(5LrP-pictured
left).
5Set this to “On” using the and
arrows.
°C
Frost protection
WhensettoON,thebuiltinfrostprotectionfeaturewillensurethe
temperatureofyoursubstrateneverdipsbelow10oc. This protects against
frozensubstratesandensureseconomicalheatuptimes.
Up
Manual control mode
Period1
Down
Program mode indicator
Power
Menu button
Period 4
Period 2
Period 5
Heating on
Period3
Period6
Clock Button
1Tap the button to switch unit on.
2 Thebacklightwillfadeafteraround10seconds.
3 Tapthebuttontoswitchitbackonatanypoint.
4 Pressandholdthebuttonforaround7secondsoruntil
theminutesbegintoash.
5Use the and arrows to select the correct minute.
6Tap the button to switch to hour and use and to
select the correct hour.
7 Tapthebuttonagaintoedittheday.
8 Usetheandarrowstoselectthecorrectdaynumber:
1=Mon7=Sun.

www.comfortzone.co
[e-mail]
Watch the wiring guide
video on our website
Manual heating mode
Creating your heating schedule
1Tap button to switch the unit into Schedule mode.
2You will see both the and
(Period1-6)symbolsdisplayed.
3 Pressandholdfor7secondstoedityourschedule.
4 Firstly,setthestarttimefor(period1)usingtheup
and down buttons.
5 TaptosaveyourstarttimeandsettheComfortTemperature
tobetween200Cand270C.
6 Tap to advance to (period 2) and select the desired time
using and .
7 TaptosaveyourstarttimeandsettheEcoTemperature
between180Cand200C.
8 Taptoadvanceto(period3)andselectthedesiredtime
using and .
9 TaptosaveyourstarttimeandsettheComfortTemperature
tobetween200Cand270C.
10 Tap to advance to (period 4) and select the desired
time using and .
11 TaptosaveyourstarttimeandsettheEcoTemperature
between180Cand200C.
12 Tap to advance to (period 5) and select the desired time
using and .
13 TaptosaveyourstarttimeandsettheComfortTemperature
tobetween200Cand270C.
14 Taptoadvanceto(period6)andselectthedesiredtime
using and .
1 YoucanswitchbetweenManualmodeandyourcustomSchedule
bytapping.
2 Whenin(Manualcontrolmode),setatargettemperature
manuallyusingand.
3 Whenthetargettemperatureissetabovetheambient
temperature,youwillseethe(Heatingon)symbolbelowthe
targettemperature.Youmayalsoheara‘click’.
15 TaptosaveyourstarttimeandsettheEcoTemperature
between180Cand200C.
16 Nowyouhaveasetschedulefor5days.Taptosetyour
weekend heating.
17 Selectalaterstarttimeifyoulikealiein.Thistimewillapplyto
bothdays.
18 TaptosaveyourstarttimeandsettheComfortTemperature
between200Cand270C.
19 Taptosaveyourtemperatureandadvanceto
(Period 2).
20 Set the desired start time and set the Eco Temperature between
180Cand200C.
21 Youshouldnowhaveacomplete7dayheatingschedule!
22 Simplytap(Power)toactivateyourscheduleandyou’re
done.
Taptheiconatanytimetoswitchonthebacklight.Itwillturno
automaticallyafterasetperiodoftime.
Presstoswitchtheunitothenpressandholdand
together.PresstoscrolltoAFAC.Holduntil“---”is
displayed.Nowpressthenswitchotocompletethefactory
reset.
Press and hold the and to lock the screen, press and hold
againtounlock.Thisfeatureisusefulifthethermostatisinstalledinan
environment where access to the heating setting must be restricted.
ER0
Damaged or disconnected ambient temperature sensor (internal). This
errorusuallyrequiresareplacementthermostat.
ER1
Damagedordisconnectedoorsensorprobe(external).We
recommendthatyoucontactyourelectriciantoisolatetheelectricity
supplyandcheckthesensorisworkingandconnected.
Screen lock (Child lock)
Error codes
Backlight control
Factory reset
Touchscreen thermostat programming guide (8259)