Commax Wall PAD CIP-700MW User manual

1
Home Network User Manual
PMN: Wall PAD

2
Table of Contents
Introduction .................................................................................................................................................. 3
Part name ............................................................................................................................................. 3
Display composition ........................................................................................................................ 4
1 Screen Saver ...................................................................................................................................... 5
1.1. Information provided from the screen saver ........................................................ 5
2 Home Display .................................................................................................................................... 6
3 Notice ................................................................................................................................................... 7
4 Control ................................................................................................................................................. 8
4.1. FCU Control ......................................................................................................................... 8
5 Application ....................................................................................................................................... 10
5.1. Intercom .............................................................................................................................. 11
5.2. Security ................................................................................................................................ 14
5.3. Home History ................................................................................................................... 16
5.4. ETC ......................................................................................................................................... 17
6 Away/Stay Mode ............................................................................................................................ 19
7 Appendix ........................................................................................................................................... 23
7.1. Using the Owner mobile app .................................................................................... 23
7.2. Using the Guest mobile app ...................................................................................... 27
7.3. Etc .......................................................................................................................................... 30
7.4. Name Search(LOBBY PHONE) .....오류! 책갈피가 정의되어 있지 않습니다.

3
Introduction
Part name
① TFT LCD
② Speaker
③ Emergency button
④ Call guard station
⑤ Door release button
⑥ Call button
⑦ Home Button
⑧ Microphone
⑨ Power Switch
⑩ PoE
⑪ PIR
1. Sensor_in, 2. GND, 3. VCC
⑫ EM
⑬ RS-485
1. TRX-, 2. TRX+, 3.GND
⑭ DDL VCC (OPTION)
⑮ DDL S/W (OPTION)

4
Display composition
Buttons at the Bottom
Go to Home Back
Press the button

5
1 Screen Saver
We will provide information on the screen sequentially
Press the screen saver to go to the home screen.
1.1. Information provided from the screen saver
[Today's weather information] [Indoor humidity]
[Indoor temperature] [Notice]
※ It is not provided when there is no information.
※ Weather information should be connected to the external Internet to the server.

6
2 Home Display
Visitor Log Check recorded images of visitors
Concierge Calling the guard station
Away Away mode
Stay Stay mode
Notice Notice
Apps The list of installed apps
Emergency Panic alert
Cameras CCTV Camera

7
3 Notice
You can check the notices
[Notices]

8
4 Control
4.1. FCU Control
FCU Control
1) Go to the [Indoor] tab.
2) If cold/heating is in operation, the activated image is displayed, and if it
do not work, the disabled image is displayed.
3) You can turn on / off all cooling / heating machines by pressing the power
button of "whole air conditioning / heating".
4) You can enable or disable all cold / heater exit mode by pushing "go out"
button of "whole air conditioning / heating".
5) You can turn on / off the cooling / heating by pressing the power (1)
button of the controlling cold / heater.
6) You can set temperature at one degree difference by pressing the
button(②) .
7) The current temperature is displayed.
[FCU Control]

9
FCU Away mode
1) Go to the [Indoor] tab
2) Press the ‘More’ button
3) Press the "ON" button in the go-out mode to set the go-out mode. Both
the cold / heater will be turned off.
4) Pressing the "OFF" button in the go-out mode releases the go-out mode.
The cold / heating machine will return to the status before going out.
(When you turn on / off the power from away mode setting, you will be
automatically unlocked.)
Change the FCU mode
1) Press the "cooling" button to set the mode for cooling.
2) Press the "Heating" button, the mode is set for heating.

10
5 Application

11
5.1. Intercom
Guard Calling the security guard station
[The screen of calling connection and calling screen]
① Active Call and Call Waiting
② Display of calling connection
③ Volume
④ Call Start
⑤ Call refusal, Cancel
⑥ Door Open
⑦ Save of Visitor image
※ ‘Call display’ can be displayed differently by each type of call from guard station
and entrance
※ Some equipment does not provide CID function.
※ Visitors image can be saved in the storage space.
Images can be stored by 128 cuts. (188MByte standards)
※ The file is same space for visitors image and CCTV Image.
※ Internet telephone cannot be used
① ②
③ ④ ⑤ ⑥ ⑦

12
5.1.1. Common entrance
Open the door for common entrance
1) During the called of individual and common entrance please press
(Door Open) the button.
Recording visitor’s image from common entrance
1) Press ‘Capture an image’ button while paging or calling.
2) If successfully recorded, the visitor's photos which are confirmed visitors
on the home screen will be displayed.
Pick up the phone from Common Entrance
1) The visitor will be displayed on the screen with bell sounds
2) If pick up the phone please press button or please reject button.
3) If hang up the phone please press the button.

13
5.1.2. Guard station
Calling a guard station
Calling a guard station
1) To call a guard station, touch ‘Guard station’ icon or touch ‘Guard station’
button in dialing mode
2) To hang up a call, touch ‘End call’ button.
Receiving a call from a guard station
1) When the call is received from a guard station, the touch panel rings and
displays a guard station icon on the screen.
2) To receive a call, touch (Call) button. To reject a call, touch ‘Cancel’
button.
3) To hang up a call, touch ‘End call’ button.
※ Security office and management office cannot see the user’s image.
※ The guard video call is only available for products with video call cameras
※ If you use the call transfer function during the guard station call, the guard
station call is automatically terminated
※ Setting of security office -> Connect to COMMAX and control -> setting to
number -> Security and management office can be settled.
Call switching function
1) If someone calls you during a calling, it will be displayed on the screen.
2) Touch (Switch call) button to answer the call. The previous call is
disconnected as you switch the call
※ Some devices do not provide CID functionality (Caller ID).
※ Call transfer is not supported on some calls

14
5.2. Security
Emergency operation Emergency in emergency situation
Access control Access control
5.2.1. Emergency
Emergency occurrence
Emergency sensing
An emergency occurs by the user or occurs automatically by the sensor
Touch ‘Emergency’ button to send a notice of an emergency to Guard station. The
emergency notice is processed in three steps such as ‘On’, ‘Off’, and ‘Reset’
Emergency on
1) Emergency can be generated by pressing the emergency icon or by
pressing the emergency button on the front of the product. Or
automatically by the sensor
2) Emergency type is displayed at the top of the screen with a siren sound
[Emergency]
Emergency stop
1) Touch ‘Stop’ button located at the bottom of Emergency screen.
2) Put the password (default password is ‘1234) and then press enter’.

15
[Password input]

16
5.3. Home History
Visitor Log Viewing recorded images of visitors
5.3.1. Visitors Viewer
Viewing recorded images of visitors from common entrance.
[Viewing recorded images of visitors]
Delete Delete selected images
You can see where the picture was taken with the icon.
My house Picture taken at my house
Common entrance Images taken from an common entrance
Out In case of go-out
(Go out mode settings)
Viewing recorded images
In viewing a visitor mode, all recorded images from a common entrance can be
checked including time and date information. You can also check visitors if you set
out.

17
Deleting recorded images
1) Touch ‘Delete’ button.
2) Select images or all the images by checking ‘Select all’ box.
3) Touch once more to uncheck the images or ‘Select all’ box.
4) Touch ‘Delete’ button to delete selected images.
5.4. ETC
Settings Settings
Sign Up User registration
5.4.1. Sign Up
User registration/ Edit / Reset
1) Enter your ID and touch ‘ID check’ button to check for validity
2) Select your country
3) Enter your password and touch ‘Confirm’ button.
[Sign Up]

18
initialize
1) If membership has been registered, pressing the "Reset" button deletes the
registered member information.

19
6 Away/Stay Mode
[Away mode]
[Sraty mode]

20
6.1.1. Away
Away Mode
The status display of going out setting
When you go out, you can set up these functions security sensor, visitor recording,
light off, close gas valve, indirect call etc.
Away mode setting
1) Press the icon, away mode will be started.
2) The away mode will be executed automatically after the specified away
delay time.
3) If you want to cancel away mode, press ‘CANCEL’ button.
[Go Out mode set-up]
1.Delayed time for go-out 3.Start away mode
2.Action item when going out
※ If security mode is on, away mode cannot be started.
※ Return home sensor delay setting is set by setting -> user option -> delayed
from adjusted go out time.
Set Go Out mode
1) Set items to be executed when go out mode
2) Press the ‘Option’ button on the setting screen of go out mode, the
setting screen of go out mode is displayed.
3) Check the use security sensor and execution item to use.
②
③
①