Hezborg BGR8016B User manual

All technical interest rates prevail in the performance
of the real machine,
Herzborg reserves the final interpretation.
From The German Quality
For More Information, Please Visit Our Website
www.herzborg.de
SMART HOME
MODEL：BGR8016B
PRODUCT MANUAL
BUTTON SPECIFICATION
For More Information, Please Visit Our Website
www.herzborg.de
For More Information, Please Visit Our Website
www.herzborg.de
Button 1
Button 3
Button 5
Button 7
Button 9
Button 11
Button 13
Button 15
Button 2
Button 4
Button 6
Button 8
Button 10
Button 12
Button 14
Button 16
··
BGR8016B smart emitter can mark button mode
by replacing the inserted card; through 868MHZ,
16 scenes can be controlled.
MAIN FUNCTION
SMART EMITTER
SPECIFICATION:
· Product Name: 16-CHANNEL SMART EMITTER
· Product Model: BGR8016B
· Control: 868MHz
· Working Temperature: －10℃～60℃
· Dimensions: 86mm x 86mm
· Input Power Supply: 3V (3CR2430battery)
· Wireless Range: outdoor100m, indoor35m
· Directive: LED
For More Information, Please Visit Our Website
www.herzborg.de
Smart Module
Introduction
01
Smart Module
Introduction
03
Smart Module
Introduction
02
DEVICE CODE:
Button "1", "2", "3", "4" is the first channel; "5", "6", "7",
"8" is the second,"9", "10", "11","12 " is the third channel;
"13", "14", "15", "16" for the fourth. Take the first channel
as an example of device code. (The second, third and
fourth channel are the same as the first)
In the code, press the emitter "2" button and "4" button
twice, and then press the emitter "1" button once to
complete the device code.
NOTE: After the success of the code, the device will be
displayed in the APP emitter list.
EQUIPMENT OPERATION
16-CHANNEL
SMART EMITTER

For More Information, Please Visit Our Website
www.herzborg.de
ABOUT INSTALLATION
Please read the Product Instruction carefully before
installationfor the first time.
ABOUT CLEANING
The product should be placed in a clean and dry place to
prevent the internal components from moisture or entering
of other debris to into make an impact on using effect.
When the surface stained with dirt, then dry with a fine
cloth. Do not use cleaning fluid with causticity and other
chemical solvent.
ABOUT STORING
The products packed in box should be placed in ventilated
and dry place without corrosive gas to storage. The
stacking height is less than ten layers, and the storage
temperature is -10 ℃~ + 40 ℃.
For More Information, Please Visit Our Website
www.herzborg.de
ABOUT SHIPMENT
The products packed in box can be shipped with any
transportation under the condition of avoiding the direct
impact from rain, snow, striking with intensive force, etc.
ABOUT AFTER-SALES
SERVICE
If there is any malfunction, the product should be sent to
the service sites to repair oryou can contact the customer
service department of the company.
The non-professionals are not allowed to open it.
For More Information, Please Visit Our Website
www.herzborg.de
Smart Module
Introduction
05
Smart Module
Introduction
04
Herzborg GmbH
Birnbaumsmühle 65, 15234 Frankfurt Oder
Telefon + 49 335 23 38 68 38
www.herzborg.de [email protected]
SMART HOME