Commell CMB-672 User manual

CMB-672/674
Mini Barebone system
Intel High Performance Platform
Installation Guide
Edition 1.0
2006/07/30
All manuals and user guides at all-guides.com
all-guides.com

CMB-672/674 Installation Guide
2
Document Content:
zPacking List
zProduct Specification
zHardware Installation
Packing List:
CMB-672/674 Chassis x 1
(Including LV-672/LV-674 Motherboard)
DCP-PSG300 300W AC-DC Adapter x1
Slim FDD Cable x 1
40-pin to 40-pin UDMA IDE Cable x1
SATA Cable x2
PCIE-3P1 x1
IDE to Slim CD-ROM Module x1
CD Driver x1
Raid Driver disc x1
CMB-672/674
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
3
Hardware Installation:
Motherboard placement
Components showed is available for CMB-672 only
For Connector For Jum
p
er
PCI-Express
JFRNT
DDRII 1/2
SATA
USB
SYSFAN
IDE ATX
NBFAN
FDD
CPUFAN
CN_12V
CPU Socket
CDIN
JRTC
JLAN1
JLAN2
JDOM
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
4
Components showed is available for CMB-674 only
For Connector For Jum
p
er
DDRII 1/2 JFRNT
USB
SATA Port
PCI-Express
CN_12V
FDD
NBFAN
ATX IDE
CPUFAN CN_1394 Mini_PCI
SPDIF
CN_AUDIO
SYSFAN
CN_IR
JRTC
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
5
I/O panel:
LV-672/LV-674 Front:
CD-ROM
USB
Power Button Reset Button
HD LED
Power LED
FDD
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
6
LV-672 Rear:
IEEE1394
Mouse
Keyboard USB
Lan Port
COM Port
Power Supply
VGA
COM Port
Line-Out Line-In Mic Phone
PCI-E Port
Antenna
All manuals and user guides at all-guides.com
all-guides.com

CMB-672/674 Installation Guide
7
LV-674 Rear:
COM Port 1/2 Lan Port 2/4
Lan Port 1/3 VG A 1394
KB/MS USB
Antenna
PCI-E Port
Power Supply
LINE-IN
LINE-OUT
MIC-IN
Center
Rear Speaker
Side Speaker
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
8
Chassis Setup procedure:
1. Turn the chassis screws.
2. Push the Chassis shield towards the back then open it .
1
2
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
9
3. Turn the holder screws and open it.
4. Be carefully to take the CPU Fan off.
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
10
5. Open the CPU cover and refer the motherboard manual page.16 to install
the CPU.
(After installed CPU, please remember to install the CPU Fan back )
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
11
6. Open the Dimm holder then check the pin number to match the socket
side well before installing memory module.
7. Press down the memory module then check dimm holder hook well.
All manuals and user guides at all-guides.com
all-guides.com

CMB-672/674 Installation Guide
12
8. Turn the PCI-E port shield’s screw and take shield off refer picture A and
B. (If you don’t install PCI-E card, please direct to Step 11 .)
(A).
(B)
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
13
(C)
9. Put into the PCI-E Card. And Check the connects into the riser card well
then turns shield screw.
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
14
10. Take the holder to install HD driver.This holder can install two 3.5” HD
driver or four 2.5” HD driver. To refer the picture (a) and (b).
(a)
(b)
2.5 HD
Drive 1
2.5 HD Drive
2
2.5 HD Drive
3
2.5 HD Drive
4
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
15
11. Put into HD driver and connect the cable well then turn the HD driver
screws. (If you don’t have HD driver, please direct to step 12.)
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
16
12. Before Install Floppy. Turn the CD-ROM and Floppy shield screw.
(If you don’t have floppy,please direct to step 15. )
13. Take the CD-ROM and Floppy shield off.
All manuals and user guides at all-guides.com
all-guides.com

CMB-672/674 Installation Guide
17
14. Turn the floppy Screws then refer motherboard manual page “21” to
connect the floppy cable correctly.
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
18
15. Before Install the CD-ROM. Turn the CD-ROM shield screws and take it
off. (If you don’t have the CD-ROM, please direct to step 18. )
16. Insert CD-ROM into the chassis from front panel.
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
19
17. To tighten the CD-ROM and holder screws.
18. To tighten the chassis shield screws well.
All manuals and user guides at all-guides.com

CMB-672/674 Installation Guide
20
Mini-PCI card Setup procedure(For CMB-672):
1. Turn the mini-PCI chassis shield screws.
2. Take mini-PCI chassis shield off.
All manuals and user guides at all-guides.com