Commzgate ONE User manual
QuickStartGuide
CommzGate ONE appliance hardware 2017.2
What’sinthepackage
1. CommzGate ONE appliance
2. 5V Power adapter
3. USB 3G modem
Settingupthe3Gmodem
Each CommzGate ONE appliance includes a USB 3G modem. Please follow these steps to insert a SIM card.
Step 1
Remove SIM card tray from
top of modem.
Step 2
Turn over the SIM card tray
and insert SIM card. It
should fit exactly.
Step 3
Insert SIM card tray back
with SIM card face down.
Step 4
Ensure the SIM Card tray is
inserted completely and plug
the modem into the USB port
of the CommzGate ONE
appliance.
PoweringUp
Insert the AC plug of your power adapter into a power outlet
and the power adapter plug into the micro-USB port of your
CommzGate ONE appliance.
A red light next to the micro-USB port would indicate the
CommzGate ONE appliance is powered up.
A blue light on the USB modem would indicate the modem is
powered up.
Page 1
Configuration
The CommzGate ONE appliance can be configured and
operated by accessing its web-interface by connecting to its
built-in Wifi access point.
Login to the appliance hardware’s Wifi network which appears
in the format commzgate-xxxxxxxxxxxx
where the
xxxxxxxxxxxx
unique identifier can be found labeled at the
bottom of the appliance.
The password to the Wifi network is ‘commzgate’.
Figure 1. Wifi Access Point
Ensure that you do not plug in a LAN cable to the appliance at this point, doing so will disable the Wifi access point.
Once logged in to the Wifi network, access the URL
http://10.10.1.1:8080 .
This brings you to the Login page.
At the main login page, enter the default Administrator ID and
Password and click Sign In.
Figure 2. Login Page
Please note that the Wifi network is NOT connected to the internet. Features that are dependant on Internet availability will not
work in this mode.
If you wish to configure CommzGate to run on your LAN with an assigned IP address, please follow these steps.
(Skip these steps to continue using the CommzGate appliance’s Wifi network.)
1. Go to ‘Configure>Network’.
2. Select ‘Assign Manually’ and enter the network details for your appliance to run on your LAN.
3. Click ‘Save’ and CommzGate will reboot.
4. Plug in the LAN cable to the CommzGate appliance’s network port.
You should now be able to access the CommzGate login page on your LAN via the assigned IP address.
Note: The CommzGate appliance’s Wifi network will be turned off once you have plugged into a LAN.
Once you have logged in to CommzGate at
http://<IP address>:808
0
The Administrator main page will be display.
From the Main page, you will be able to view the operational
status of your CommzGate server and the list of Portal User
Accounts.
Figure 3. Administrator Main Page
Page 2
