Compact Home Lifts Elegance Plus Series User manual

Compression Load
330kg / 3250 N Optional Non-penetrating
Fixingss to Ground Floor
No Load Bearing on 1st Floor
Fixings used to Maintain Rail Gauge
2x Bugle Screw
Guide Fixing
Technical Information:
MAX Capacity 220kg / 2-3 Persons
CAPACITY:
TRAVEL:
NO of FLOORS:
240v 1PH 50HZ
SUPPLY VOLTAGE:
RUNNING CURRENT:
3.2 AMP
STARTING CURRENT:
4.0 AMP
STANDARD COLOUR:
Rope Drum, Braked Gear Motor Drive
PRINT MAY BE REDUCED - DO NOT SCALE.
Drawn Date
DIMENSIONS IN MM UNLESS
OTHERWISE NOTED
Dwg No
SCALE:
A4
THIRD ANGLE PROJECTION - AS 1100
TITLE
2017
JMG 05/2017
Rev
JMG 05/2017 Design Updated 1
Description Rev By Rev Date Rev
Elegance Plus Single & Thru Car
DRIVE SYSTEM:
Elegance Plus
Agate Grey - RAL 7038
Minimal Load on Ceiling
Possible Lateral Load of 8kg
2 Fixed Pins in Shear with Ceiling
Up to 4500mm
Up to 3 with split level
(Thru Car)
© Elegance PLUS
Lift Installation
Compact Lifts
3

45mm Height
Safety Pay
Shaft Lid
816
1940mm Lift Inner Height
1100mm
Door Height
Standard Application
Shaft Lid
PRINT MAY BE REDUCED - DO NOT SCALE.
Drawn Date
DIMENSIONS IN MM UNLESS
OTHERWISE NOTED
Dwg No
SCALE:
A4
THIRD ANGLE PROJECTION - AS 1100
TITLE
2017
JMG 05/2017
Rev
JMG 05/2017 Design Updated 1
Description Rev By Rev Date Rev
Elegance plus
© Compact Lifts Elegance Plus
Installation
2425mm
Maximum Travel 4500mm
Minimum 1st Floor
Ceiling Height 2440
3

1040mm Guide Width
1046mm Width Between Floor Members
YY
Shaft Lid Assy
Shaft Lid Support
Floor Insert Body
Floor Cover Flange
Ceiling Flange
Explode View
400mm
1278mm Floor Cut Length
639mm
Z
G
SECTION Y-Y
40
40
DETAIL Z
Ceiling Flange
25 5
27
50
12
2
4 6
27
DETAIL G
Shaft Lid Trim
Shaft Lid Support Floor Insert Body
Floor Cover Flange
E Type Sealing Strip
Shaft Lid Plate
Front
PRINT MAY BE REDUCED - DO NOT SCALE.
Drawn Date
DIMENSIONS IN MM UNLESS
OTHERWISE NOTED
Dwg No
SCALE:
A4
THIRD ANGLE PROJECTION - AS 1100
TITLE
©
2017
JMG 05/2017
Rev
JMG 05/2017 Design Updated 1
Description Rev By Rev Date Rev
Elegance Plus
Elegance Plus Floor Insert Body &
Shaft Lid Assembly
Compact Lifts
3

Guide Rail Gauge = 1040mm
183
1298mm
649mm
509mm
1018mm
10
523mm
1046mm To Suit Floor Insert
91.50
104.50
209
Cutout for Floor Insert Body
Template Tol.
+3 / -1
PRINT MAY BE REDUCED - DO NOT SCALE.
Drawn Date
DIMENSIONS IN MM UNLESS
OTHERWISE NOTED
Dwg No
SCALE:
A4
THIRD ANGLE PROJECTION - AS 1100
TITLE
©
2017
JMG 05/2017
Rev
JMG 05/2017 Design Updated 1
Description Rev By Rev Date Rev
Elegance Floor Insert Cutout Sizes
Elegance Plus
Compact Lifts
FRONT
BACK
GPO POSITION BOTTOM
FLOOR CEILING
3

858mm
2835mm Both Doors Full Open
522.50mm
COP
1040mm
1798mm
816mm Clear Width
1686mm
COP
1095mm
Depth behind Light Curtains
40mm
Door Thickness
773mm
Internal Width
1243mm
2050mm with Front Door Open & Rear Door Shut
1017mm
Depth Both Ends Light Curtain
COP
1147mm Both Doors Shut
COP
Doors can operate in RH and LH Positions
Front
Front
Front
Front
PRINT MAY BE REDUCED - DO NOT SCALE.
Drawn Date
DIMENSIONS IN MM UNLESS
OTHERWISE NOTED
Dwg No
SCALE:
A4
THIRD ANGLE PROJECTION - AS 1100
TITLE
©
2017
JMG 05/2017
Rev
JMG 05/2017 Design Updated 1
Description Rev By Rev Date Rev
Elegance Plus
Compact Lifts
Elegance Thru Car Configuration
3

To Ceiling
100mm
To Inner
Wall 100mm
Power
Socket
2385mm
XX
FF
Power
Socket
Floor
Insert
Shaft Lid
Raised to
Show
Floor
Insert
900mm
Minimum
Door Width
930
20
1378mm
20
Guide Width
1040mm
1146mm 20 20
SECTION X-X
988mm
948mm 20 20
SECTION F-F
Wall Thickness By the Builder
Shaft Application
Bottom Door & Frame removed for Lift Installation
PRINT MAY BE REDUCED - DO NOT SCALE.
Drawn Date
DIMENSIONS IN MM UNLESS
OTHERWISE NOTED
Dwg No
SCALE:
A4
THIRD ANGLE PROJECTION - AS 1100
TITLE
2017
JMG 05/2017
Rev
JMG 05/2017 Design Updated 1
Description Rev By Rev Date Rev
Elegance Plus
Compact lifts.
©
Elegance Plus Shaft Information
50
2300mm
Maximum Travel 4500mm Minimum 1st Floor Ceiling Height 2440mm
3

Maximum 4000mm
MM
130mm Between Gate &
Door Pivot Hinge
1000mm
816mm
SECTION M-M
Door & Gate Close
PRINT MAY BE REDUCED - DO NOT SCALE.
Drawn Date
DIMENSIONS IN MM UNLESS
OTHERWISE NOTED
Dwg No
SCALE:
A4
THIRD ANGLE PROJECTION - AS 1100
TITLE
©
2017
JMG 05/2017
Rev
JMG 05/2017 Design Updated 1
Description Rev By Rev Date Rev
Elegance Plus
Compact Lifts
Elegance Plus Void Application
3

KK
657mm
50
770mm
1101mm
SECTION K-K
20
Door & Gate Open
PRINT MAY BE REDUCED - DO NOT SCALE.
Drawn Date
DIMENSIONS IN MM UNLESS
OTHERWISE NOTED
Dwg No
SCALE:
A4
THIRD ANGLE PROJECTION - AS 1100
TITLE
©
2017
JMG 05/2017
Rev
JMG 05/2017 Design Updated 1
Description Rev By Rev Date Rev
Elegance Plus
Compact Lifts
Elegance Plus Void Application
3