Compaq 2710p - Notebook PC User manual

HP 2700 Ultra-Slim Expansion Base
User Guide

© Copyright 2007 Hewlett-Packard
Development Company, L.P.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: July 2007
Document Part Number: 443762-001

Table of contents
1 Identifying components
Top components ................................................................................................................................... 1
Rear components ................................................................................................................................. 2
Left-side components ........................................................................................................................... 3
Getting more information ...................................................................................................................... 4
2 Docking and undocking
Connecting to the AC adapter .............................................................................................................. 5
Docking the computer .......................................................................................................................... 7
Undocking the computer ...................................................................................................................... 8
3 Using the expansion base
Using the optical drive .......................................................................................................................... 9
Inserting an optical disc ....................................................................................................... 9
Removing an optical disc when running on battery or external power .............................. 10
Removing an optical disc when no computer power is available ....................................... 11
Using the optional HP 2700 Ultra-Slim Battery .................................................................................. 12
Connecting the optional accessory battery ........................................................................ 12
Disconnecting the optional accessory battery ................................................................... 13
Connecting an optional security cable ................................................................................................ 15
4 Troubleshooting
Docking and undocking problems and solutions ................................................................................ 17
External device problems and solutions ............................................................................................. 18
Technical support ............................................................................................................................... 19
Index ................................................................................................................................................................... 20
iii

iv

1 Identifying components
Top components
Component Description
(1) Docking posts (4) Align and secure the computer for proper connection to the
expansion base.
(2) Computer connect/release mechanisms (4) Connect the computer when you press it down and release the
computer when you pull the connection latch.
(3) Security cable switch When used with an optional security cable, slide the switch to
secure the expansion base either when a computer is docked or
when a computer is not docked.
(4) AC power connect light On: The expansion base is connected to AC power.
(5) Docking connector Connects the computer to the expansion base.
(6) Connection light On: The computer is docked.
(7) Connection latch Pull the connection latch outward to release the computer.
Top components 1

Rear components
Component Description
(1) External monitor port Connects an optional external VGA monitor or projector.
(2) RJ-45 (network) jack Connects a network cable.
(3) USB ports (4) Connect optional USB devices.
(4) S-Video-out jack Connects an optional S-Video device such as a television, VCR,
camcorder, overhead projector, or video capture card.
(5) Audio-out jack Produces computer sound when connected to optional powered
stereo speakers, headphones, ear buds, a headset, or television
audio.
(6) Audio-in jack Connects home audio equipment such as CD and MP3 players.
(7) Power connector Connects the computer's AC adapter or an optional adapter.
(8) Security cable slot Attaches an optional security cable to the expansion base.
NOTE: Security solutions are designed to act as deterrents.
These deterrents may not prevent a product from being mishandled
or stolen.
2 Chapter 1 Identifying components

Left-side components
The optical drive is located on the left side of the expansion base.
Left-side components 3

Getting more information
●For comprehensive information about your computer, as well as governmental agency and safety
information about the use of your computer, access Help and Support by selecting Start >Help
and Support.
●The HP Web site (http://www.hp.com) provides product news and software updates.
4 Chapter 1 Identifying components

2 Docking and undocking
Connecting to the AC adapter
The expansion base requires AC power for full functionality of all ports.
WARNING! To reduce the risk of electric shock or damage to your equipment, follow these guidelines:
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect the power from the product by unplugging the power cord from the AC outlet.
If provided with a 3-pin attachment plug on your power cord, plug the cord into a grounded (earthed) 3-
pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The
grounding pin is an important safety feature.
Do not place anything on power cords or cables. Arrange them so that no one can accidentally step on
or trip over them.
Do not pull on a cord or cable. When unplugging a cord from the AC outlet, grasp the cord by the plug.
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to
operate the computer and expansion base with a voltage converter kit sold for appliances. Use only the
power cord included with the expansion base.
To connect the expansion base to AC power:
1. Plug the AC adapter into the power connector (1) on the expansion base.
2. Plug the power cord into the AC adapter (2).
3. Plug the other end of the power cord into an AC outlet (3).
Connecting to the AC adapter 5

6 Chapter 2 Docking and undocking

Docking the computer
To dock the computer:
1. Align the docking connector and docking posts on the expansion base with the docking connector
and receptors on the bottom of the computer. Lower the computer onto the expansion base until
it clicks into place.
2. The connection light turns on.
Docking the computer 7

Undocking the computer
To undock the computer:
1. Pull the connection latch outward (1) to release the computer.
2. Lift up the computer (2).
8 Chapter 2 Docking and undocking

3 Using the expansion base
Using the optical drive
Inserting an optical disc
1. Turn on the computer.
2. Press the release button (1) on the drive bezel to release the media tray.
3. Pull out the tray (2).
4. Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up
over the tray spindle.
NOTE: If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
5. Gently press the disc (3) down onto the tray spindle until the disc snaps into place.
6. Close the media tray.
NOTE: After you insert a disc, a short pause is normal. If you have not selected a media player, an
AutoPlay dialog box opens. It prompts you to select how you want to use the media content.
Using the optical drive 9

Removing an optical disc when running on battery or external power
1. Press the release button (1) on the drive bezel to release the media tray, and then gently pull out
the tray (2) until it stops.
2. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it.
3. Close the media tray and place the disc in a protective case.
10 Chapter 3 Using the expansion base

Removing an optical disc when no computer power is available
1. Insert the end of a paper clip (1) into the release access in the front bezel of the drive.
2. Press in gently on the paper clip until the tray is released, and then pull out the tray (2) until it stops.
3. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it.
4. Close the media tray and place the disc in a protective case.
Using the optical drive 11

Using the optional HP 2700 Ultra-Slim Battery
An optional accessory battery can be used with the expansion base.
Connecting the optional accessory battery
To connect the optional accessory battery to the computer and docking station, follow these steps:
1. Turn the computer upside down.
2. Slide the accessory battery connector door open to expose the accessory battery connector.
3. Aligning the docking connector on the travel battery with the docking connector on the computer,
connect the two hooks on the front edge of the battery to the 2 recesses on the computer (1).
4. Lower the accessory battery into place (2).
12 Chapter 3 Using the expansion base

5. Slide the accessory battery locking latch to secure the accessory battery to the computer.
6. Turn the computer right-side up.
7. Align the docking connector and docking posts on the expansion base with the docking connector
and receptors on the bottom of the accessory battery. Lower the computer onto the expansion base
until it clicks into place.
Disconnecting the optional accessory battery
To disconnect the optional accessory battery from the docking station and computer, follow these steps:
1. Pull the connection latch outward (1) to release the computer and accessory battery.
Using the optional HP 2700 Ultra-Slim Battery 13

2. Remove the computer and accessory battery (2).
3. Turn the computer upside down.
4. Slide the accessory battery locking latch (1) to unlock the accessory battery.
5. Slide the accessory battery release latch (2) to release the accessory battery.
6. Release the hooks on the accessory battery from the recesses on the computer and remove the
accessory battery (3).
14 Chapter 3 Using the expansion base

Connecting an optional security cable
NOTE: Security solutions are designed to act as deterrents. These deterrents may not prevent a
product from being mishandled or stolen.
To install a security cable:
1. Loop the security cable around a secured object.
2. Insert the key (1) into the cable lock (2).
3. Insert the cable lock into the security cable slot on the computer (3), and then turn the key.
4. Set the security switch on the expansion base to either lock only the expansion base (1) or lock
both the expansion base and the computer (2).
Connecting an optional security cable 15

4 Troubleshooting
If you experience problems with your expansion base, follow the troubleshooting steps below:
1. Refer to the information in this chapter.
2. Access Help and Support by selecting Start >Help and Support from your computer. In addition
to providing information about your operating system, Help and Support provides a searchable
database of help topics, updated regularly by HP and Microsoft.
3. See the HP Web site at http://www.hp.com.
16 Chapter 4 Troubleshooting