Compaq Evo N620c User manual

b
Getting Started
Compaq Evo Notebook N620c Series
Document Part Number: 316625-001
January 2003
This guide explains how to set up your hardware and software,
identify the exterior components of the notebook, find and install
the latest versions of Compaq software, and find additional
information and support.
316625-001.book Page i Thursday, December 12, 2002 9:01 AM

© 2003 Compaq Information Technologies Group, L.P.
Compaq, the Compaq logo, Evo, ROMPaq, and SoftPaq are trademarks of
Compaq Information Technologies Group, L.P. in the U.S. and/or other
countries. Microsoft and Windows are trademarks of Microsoft
Corporation in the U.S. and/or other countries. All other product names
mentioned herein may be trademarks of their respective companies.
Compaq shall not be liable for technical or editorial errors or omissions
contained herein or for the incidental or consequential damages in connection
with the furnishing, performance, or use of this material. The information in this
document is provided “as is” without warranty of any kind, and is subject to
change without notice. The warranties for Compaq products are set forth in the
express limited warranty statements accompanying such products. Nothing
herein should be construed as constituting an additional warranty.
Getting Started
First Edition January 2003
Reference Number: N620c
Document Part Number: 316625-001
316625-001.book Page ii Thursday, December 12, 2002 9:01 AM

Getting Started iii
Contents
1 Hardware and Software Setup
Setting Up the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
Setting Up the Software . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4
Setting Up the Wireless MultiPort. . . . . . . . . . . . . . . 1–5
Installing Optional Applications . . . . . . . . . . . . . . . . 1–6
Notebook Support and Safety Tips . . . . . . . . . . . . . . 1–7
Confirming Hibernation Settings. . . . . . . . . . . . . . . . 1–8
2 A Look at the Notebook
Display Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Pointing Device Components. . . . . . . . . . . . . . . . . . . . . . 2–2
Pointing Stick Model. . . . . . . . . . . . . . . . . . . . . . . . . 2–2
TouchPad Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3
Dual Pointing Device Model . . . . . . . . . . . . . . . . . . . 2–4
Top Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5
Speakers and Memory Compartment . . . . . . . . . . . . 2–5
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–6
Buttons, Keys and Switches . . . . . . . . . . . . . . . . . . . 2–8
Left Side Components . . . . . . . . . . . . . . . . . . . . . . . . . . 2–10
Right Side Components . . . . . . . . . . . . . . . . . . . . . . . . . 2–11
Front Panel Components . . . . . . . . . . . . . . . . . . . . . . . . 2–12
Rear Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . 2–13
Bottom Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–15
Additional Standard Components . . . . . . . . . . . . . . . . . 2–17
316625-001.book Page iii Thursday, December 12, 2002 9:01 AM

iv Getting Started
Contents
3 How to Get Information, Help and Updates
Using the Documentation Library CD . . . . . . . . . . . . . . . 3–1
Viewing Guides on the CD . . . . . . . . . . . . . . . . . . . . 3–2
Contacting Technical Support . . . . . . . . . . . . . . . . . . . . . 3–3
Updating Compaq Software. . . . . . . . . . . . . . . . . . . . . . . 3–4
Obtaining the Compaq Support Software CD . . . . . . 3–5
Preparing to Update Software . . . . . . . . . . . . . . . . . . 3–5
Downloading Software from the Internet . . . . . . . . . . . . 3–6
Downloading System ROM. . . . . . . . . . . . . . . . . . . . 3–7
Downloading Other SoftPaqs . . . . . . . . . . . . . . . . . . 3–8
Restoring Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–9
Installing a Retail Version of an Operating System. . . . 3–10
Index
316625-001.book Page iv Thursday, December 12, 2002 9:01 AM

Getting Started 1–1
1
Hardware and Software Setup
Setting Up the Hardware
ÄCAUTION: Setup must begin by connecting the notebook to AC power.
To ensure that the correct drivers load and to prevent file corruption or
damage to the components during initial setup:
■Do not set up the notebook while it is docked in an optional
Port Replicator.
■Do not remove the battery pack until the notebook has been
connected to external AC power.
■Do not run the notebook on battery power. Use external AC
power throughout initial setup.
316625-001.book Page 1 Thursday, December 12, 2002 9:01 AM

1–2 Getting Started
Hardware and Software Setup
1. Place the notebook on a flat surface near an electrical outlet,
then connect the notebook to external AC power.
Plug the AC adapter cable into the DC power connector 1.
Plug the power cord into the AC adapter 2and into an
electrical outlet 3. (Power cords and outlets vary by country.)
Connecting the notebook to external power
2. Open the notebook by sliding the display release latch to the
right 1and raising the display 2.
Opening the notebook
316625-001.book Page 2 Thursday, December 12, 2002 9:01 AM

Hardware and Software Setup
Getting Started 1–3
3. Turn on the notebook by sliding and releasing the power
switch 1.
Turning on the notebook
When the notebook is turned on:
■The power/standby light 2turns on.
■The battery pack in the battery bay begins to charge and the
battery light 3turns on. The battery light remains on while
the battery pack is charging and turns off when the battery
pack is fully charged.
316625-001.book Page 3 Thursday, December 12, 2002 9:01 AM

1–4 Getting Started
Hardware and Software Setup
Setting Up the Software
The initial setup prompt is displayed on the screen as soon as the
notebook is connected to external power.
Before responding to the initial setup prompt and proceeding
through the online instructions, read the following setup
information.
ÄCAUTION: To ensure that the correct drivers load and to prevent file
corruption or damage to the components during initial setup:
■Do not unplug the notebook from the electrical outlet.
■Do not shut down the notebook.
■Do not remove or insert a drive.
■After you begin the initial software setup, you must complete
the entire process. Setup time varies depending on notebook
configuration.
■If you are prompted to select a language, choose carefully
and keep in mind that the languages you do not choose will
be deleted from the system and cannot be restored during
initial setup.
■During the setup process, you must accept the
End User License Agreement to continue.
316625-001.book Page 4 Thursday, December 12, 2002 9:01 AM

Hardware and Software Setup
Getting Started 1–5
Setting Up the Wireless MultiPort
✎If you ordered your notebook with a wireless MultiPort, your
notebook was shipped with the wireless MultiPort module
preinstalled.
Preinstalled wireless MultiPort Module
The wireless MultiPort is disabled by default. To set up the
wireless MultiPort:
1. Press Fn+F2 to enable the wireless MultiPort and install
preloaded wireless MultiPort drivers.
✎Do not attempt to install wireless MultiPort drivers before the
initial software setup is complete.
2. Install preloaded wireless MultiPort software according to the
instructions in “Installing Optional Applications” later in this
chapter.
To configure the wireless MultiPort, contact your network
administrator.
316625-001.book Page 5 Thursday, December 12, 2002 9:01 AM

1–6 Getting Started
Hardware and Software Setup
For instructions on using the wireless MultiPort, refer to the
wireless user documentation included on the Documentation
Library CD shipped with your notebook:
■For a Bluetooth wireless device, refer to:
❏Software Reference Guide (Bluetooth for Windows) or
❏Software Reference Guide (Bluetooth for XP).
■For an 802.11b wireless device, refer to User’s Guide
(Compaq Wireless LAN MultiPort W200).
Installing Optional Applications
You can install third-party applications or preloaded utilities at
any time after initial setup is complete.
■To install a third-party application, refer to the documentation
included with the application.
■To install a preloaded application, select Start > Software
Setup. A setup wizard loads, and a list of applications is
displayed. Select the application you want to install, and
follow the instructions on the screen.
✎To view the descriptions and space requirements of preloaded
Compaq utilities without installing them, select Start > Software
Setup, and, after viewing the utility information, select Cancel.
■To install preloaded wireless MultiPort software, select
Start > Software Setup. A setup wizard loads, and a list of
applications is displayed. Select the application for the
wireless option you ordered with your notebook:
❏For Bluetooth wireless, select Bluetooth MultiPort
Module by Compaq.
❏For 802.11b wireless, select Compaq Wireless LAN
W200 Client Manager.
316625-001.book Page 6 Thursday, December 12, 2002 9:01 AM