Scanning
Scanning
7
Using the scanner utilities
Several utility programs come with your Compaq scanner
Button Manager Utility
The Button Manager utility lets you set options for each of the scanner buttons
You can change the image editing program, the scan folder, and other options
for each button To access the Button Manager from the Start menu, click:
Programs Compaq S2 Compaq S2 Button Manager
Copy Utility
The Copy utility helps you make multiple copies easily If you are only making a
single copy, use the Printer button If you need to make more than one copy of
the same document, use the Copy utility To run the Copy utility, from the Start
menu, click: Programs Compaq S2 Compaq S2 Copy Utility
Scanner Test Utility
The Scanner Test utility simply tests the scanner It is used to determine
additional information about the scanner To run the Scanner Test utility from
the Start menu, click: Programs Compaq S2 Compaq S2 Scanner Test
Using the scanner software
To scan and save files on your PC, the Compaq S200 scanner uses a standard
TWAIN interface for scanning documents On newer operating systems, a WIA
(Windows Image Acquisition) interface is provided Because the S200 supports
both TWAIN and WIA, it is compatible with a wide range of software
Windows Imaging
To perform a scan using the standard Windows Imaging utility:
>Start the Imaging utility from the Windows Start menu
Click Start Programs Accessories Imaging
>Open the File menu and choose the Select Device … menu option
Make sure that the selected scanner is set to Compaq S2
>Open the File menu again and choose Scan New (or Acquire Image
if you are running Windows 2000)
>If you are using TWAIN, press the Scan button Otherwise, follow the
scanner wizard
