Compucessory CCS15156 User manual

True Wireless Stereo EarbudsWith Touch Control
Model: CCS15156
Packaging Contents:
1 pairs ofWireless Earbuds
1×Type-C Charging Cable
1×User Guide
How to Use:
1. Charge YourWireless Earbuds
1.) Prior to use, charge your wireless earbuds
Use the suppliedType-C charging cable, plug the cableinto the Type-C port which is
located on the back of thecharging case.
2.) Charging case charging: the blueLED is flash.
Charging case full charged: solid blue
Charging case
Blue LED
2. Selecting the Right Fit
Your wireless earbuds includethree sizes of earbud caps. They arepre-assembled with
medium sizeearbud caps. Determine which onesprovide the best fit to achieve theoptimal
listening experience.
If the medium size earbud caps do not feel comfortable,pull them off and replace with another
size.
Type- C Small and Large earbud caps
Charging cable

3. Connecting / Wireless Pairing
1.) Make sure the earbudsand your Bluetooth device are next to each other (within 3
feet / 1 meter )
2.) Remove both earbuds from the charging case and place into your ears.
3.) Turn on your device’s Bluetooth. Most devices will automatically detect your earbuds.
Locate and select “CCS15156”. It will indicate that your earbuds are now connected
or paired.
If your device does not automatically detect your earbuds, make sure Bluetooth
is turned on, do a SEARCH for “CCS15156” and then click CONNECT.
Notes:
To shut down, touch theMFB for 4 seconds or place back into the charging case. Once paired, the range is
approximately 32 feet/10 meters.Your earbud will automatically connect to the last paired and connected device
when it is turned on again
4. OperatingYour Wireless Earbuds
Whenplaying music:
•To skip to the next song, touch the right ear button for twice.
•To skip to the previous song, touch the left ear button for twice.
•To increase volume, touch the right ear button for 1 second.
•To decrease volume, touch the left ear button for 1 second.
When on a call:
•To answer or hang up a call, shorttouch the right or left ear button for 1 second.
•To reject an incoming call, touch the right or left ear button for 2-3 seconds.
Low Battery
•You’ll hear a voice prompt of “Low battery” when the battery level is less than 10%.
EarbudLED Indicators
•When your wireless earbuds are charging –the blue LED light is on.
•When your wireless earbudshave finished charging –the blue LED light is off;.
•When your Bluetooth is being paired –the blue LED light flash quickly.

Troubleshooting
If your wireless earbuds are not pairing together OR if both earbuds are not flashing
blue, use the following instructions to reset and re-pair your earbuds:
1.) Remove both earbuds from the charging case and turn them OFF by touching both
earbuds simultaneously until the blue lights slow flashes 3 times. Please note, do
not cover entire earbuds with your finger or you will not see the blue light flash.
2.) Next, touch and hold down both earbuds simultaneously for approximately 13
seconds, until you see the blue lights quickly flash2 times. You will need to
continue to hold and see the blue light flash a second time. This resets your
earbuds.
3.) To pair your wireless earbuds, place both earbuds into the changing case, and take
them out simultaneously;
4.) Make sure the earbuds and your Bluetooth device are next to each other (within 3 feet
/ 1 meter )
5.) Turn on your device’s Bluetooth. Most devices will automatically detect your earbuds.
Locate and select “CCS15156”. It will indicate that your earbuds are now connected or
paired.
If your device does not automatically detect your earbuds, make sure Bluetooth is
turned on, do a SEARCH for “CCS15156” and then click CONNECT.
Notes:
To shut down, touch theMFB for 4 seconds or place back into the charging case. Once paired, the range is
approximately 32 feet/10 meters.Your earbud will automatically connect to the last paired and connected device
when it is turned on again
Label:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for
compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
FCC ID:2AGA9TWS05