Comtrend Corporation WR-5931 User manual

Page%1!
Quick Install Guide
WR-5931| AC2600 Wireless Router
GETTING TO KNOW YOUR AC2600 WIRELESS ROUTER
Item Name
Description
WPS Button
WiFi Protected Setup button. Press this button for 2
seconds to activate the 2.4GHz & 5GHz Wireless WPS
function.
Reset Button
Press this button for 10 seconds to reset the router to
factory default settings (clear all settings).
RT/AP Switch
RT (Router Mode)
Working as a standard WiFi router.
AP (Access Point Mode)
Working as a standard WiFi access point.
LAN 1-4 Port
Local Area Network (LAN) Ethernet ports 1 to 4.
WAN Port
Wide Area Network (WAN / Internet) port.
Power Plug
Power connector, connects to A/C power adapter.
A
LED Name
Light Status
Description
Power
On
Router is switched on and correctly powered.
Status
On
When internet connection OK.
Off
No internet connection.
Flashing
Slow Flashing: WPS pairing process.
Quick Flashing: Resetting to factory default.
2.4GHz
On
2.4GHz Wireless is enabled.
Off
2.4GHz Wireless network is switched off.
Flashing
2.4GHz Wireless LAN activity (transferring
or receiving data).
5GHz
On
5GHz Wireless is enabled.
Off
5GHz Wireless network is switched off.
Flashing
5GHz Wireless LAN activity (transferring
or receiving data).
Front Panel
WPS Button
Reset
Button
RT/AP Switch
LAN 1-4
Ports
WAN
Port
Power Plug
Back Panel

Page%2!
DEVICE SETUP
Confirm the following are completed prior to Step 1:
1. Type http:192.168.2.2into your Web browser.
2. Sign in with the default login.
Username: admin
Password: 1234
3. Click ‘Quick Setup’.
2
B
Make Sure This Switch is Set to “RT”
Insert Modem via Ethernet Cable
Plug your Power Here
Insert Your Laptop/PC via Ethernet Cable
(or connect via WPS Wireless)

Page%3!
4. Select the time zone of the area where you live and then click ‘NEXT’.
5. Select the broadband type of Internet connection you are using (Cable/Satellite/Other
Modem: Select Dynamic IP [i.e. DHCP]; DSL Modem: Select PPPoE).
6a. If you selected Dynamic IP [i.e. DHCP], then press ‘OK’.
6b. If you selected PPPoE, then type in the DSL gateway’s username and password provided by
your service provider, then press OK.

Page%4!
7. Click ‘APPLY’. When you see the System Restarting message, it means the router will be
ready with new settings within 40 seconds. Upon restarting, your router will be ready for
use.
YOUR WIRELESS ROUTER IS READY TO USE!
ADDITIONAL INFORMATION
Note: For instructions on advanced features such as customizing your router name, setting up the router
in Access Point mode, and more, visit us.comtrend.com and download the full User Manual.
For more information:
Website: http://us.comtrend.com/
YouTube: https://www.youtube.com/user/ComtrendConnection
Facebook: https://facebook.com/Comtrend
Support: Visit our website or call [phone]