Conceptronic Grab'n'GO CH3WNAS Use and care manual

Copyright®2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 3
Firmware update instructions for the Conceptronic CH3WNAS
1. Login to the CH3WNAS. The default settings are:
IP address : http://1 2.168.0.30
User name : admin
Password : <empty>
2. Press the ‘Configuration’ button.
3. Click on ‘Tools’ in the top menu bar.
. Click on ‘Firmware’ in the left menu bar.
5. Click on the ‘Browse’ button to locate the firmware file. When done it will appear in
the ‘File path’ field.
6. Click 'Apply'.
7. The upgrade will start. Follow the instructions on your screen.
8. When the upgrade process is completed the CH3WNAS will reboot automatically.
9. A factory reset is needed to make sure the firmware becomes fully functional:
Note: When a factory reset is initiated, all previous settings will be lost. As a result,
the CH3WNAS will need to be reconfigured afterwards.
-Login to the CH3WNAS as described at point 1.
-Click on ‘Tools’ in the top menu bar.
-Click on ‘System’ in the left menu bar.
-Click on ‘Restore’ under the ‘Default’ section and follow the instructions on
your screen.
10. The CH3WNAS is now fully updated and ready to be used. Don’t forget to reconfigure
your CH3WNAS before use (if needed).

Copyright®2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 2 of 3
Conceptronic CH3WNAS Release Notes
1.06 09/19/2008
Fixed:
- Files larger than 2GB cannot be played on the Playstation 3.
1.05A 07/10/2008
Fixed:
- Auto update issue from the UPnP AV Server.
1.05 07/01/2008
Fixed:
- Unable to continually copy a file.
- Schedule Downloads list gone after device has been turned off or rebooted.
1.0 0 /10/2008
Fixed:
-UPnP AV Server fails to process 10.000+ files.
Note: The new UPnP AV Server requires a manual install of the UPnP AV Server
through the new Easy Search Utility 3. .0.0. Download the Easy Search Utility
3. .0.0 through the download section of our website, select the CH3WNAS
with the 1.04 firmware and click on the "UPnP AV Server" button to install the
UPnP AV Server.
-UPnP AV segmentation fault.
1.03 12/27/2007
Added:
-Support for PlayStation 3.
Fixed:
-Better UPnP AV Server.
-Extended password length to 16 characters.
-Failed to locate the device after changing device’s hostname.
-UPnP AV Server disconnected when playing a huge MP3 file.
1.02 10/2 /2007
Fixed:
-“Download Now” button fixed.

Copyright®2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 3 of 3
1.02BETA 10/16/2007
Fixed:
-Scheduled back-up does not start.
You need to share a folder on your computer to enable this scheduled download option.
This update makes it possible to create a scheduled back-up from your computer (folder
only). ‘Account’ (username and password) and ‘Anonymous’ computer login supported.
-Possible to make a scheduled back-up from the local disk of the CH3WNAS.
‘Folder’ and ‘File’ option supported.
1.01 07/27/2007
Changed:
-Default IP address changed from 1 2.168.1.30 to 1 2.168.0.30.
This IP is used when there is no DHCP server in the network or when directly connected to
the computer. In the last case, the computer should have a fixed IP address in the same
range.
1.00
-Initial release.