Concourse SMART WHEELS User manual

1
SMART WHEELS AXLE FITTING INSTRUCTIONS

2
Contents
ROVIC RV1S ............................................................................................................................................................................................................ 3!

3
ROVIC RV1S
Tools Required:
- Rovic Axle Kit
- 19mm Socket / Spanner
- 10mm Spanner
- Phillips #2 Screwdriver

4
1. Use 19mm Socket to remove Left wheel from buggy

5
2. Using the 10mm spanner, remove the nut holding the foot brake to the
buggy using the #2 screwdriver to hold the screw.

6
3. Remove the foot brake assembly and re-fit and tighten the nut to the screw

7
4. Take the axle adaptor and fit to buggy as shown below and tighten nut
with the 19mm Socket

8
5. Use 19mm Socket to remove Right wheel from buggy

9
6. Remove the 2 cable retaining clips using the #2 Philips screwdriver

10

11
7. Unscrew the brake cable anti-clockwise and remove from the housing

12
8. Take the axle adaptor and fit to buggy as shown below and tighten nut
with the 19mm Socket