Condari QASAIR 4F Assembly Instructions

ISLAND
INSTALLATION & USER
INSTRUCTIONS

Qasair Rangehoods Installation Instructions2

Qasair Rangehoods Installation Instructions 3
Standard Warranty / Extended Warranty
Important Information
Instructions for Models
4F / PRE / FRA / MA / SQ 420 / MOL / FPR / BUR / BEL
Instructions for Models
D 400 / D 500 / SEN
Instructions for Models
TR CT / LIV
Installation Ideas
Operation Details, Rangehood Cleaning, Filter Cleaning
Ducting Pieces
Remote Switching Specications
Appliance Guarantee
Guarantee Exclusions
6
4
20
23
26
29
42
47
50
49
48

Qasair Rangehoods Installation Instructions4
The installation of QASAIR Rangehoods must comply with the information in this booklet. QASAIR Rangehoods are
designed and made to work efciently over all domestic cookware available on the Australian market.
Clearance from cooktop to Rangehood
For electric hot plate cooktops
As there are no regulations for Rangehoods over an electric hot plate, please follow the manufacturers Instructions /
Recommendations.
For Induction cooktops
Induction cooktops may present problems with condensation on lters of Rangehoods.
All Qasair Rangehoods installed above an induction cooktop must be installed no less than 750mm between the
induction cooktop and the Rangehood, with the exception of the Eastmore (EAS) Rangehood which can be installed
no less than 600mm. Undermount (NDCH) and Conley (CON) Rangehoods are not suitable for induction cooktops.
For gas cooktops
All Qasair Rangehood installations over a gas appliance must comply with (AS/NZS 5601.1).
The Regulations for the installation of Gas Appliances (AS/NZS 5601.1) states that the clearance between the
highest part of the burner of a gas cooking appliance and a Rangehood be no less than 600mm. If the gas
appliance is designed for use without a cooking vessel like an indoor barbecue or open ame grill, then the
clearance from the cooking surface to the Rangehood shall be no less than 1200mm.
All Qasair Rangehoods installed above a gas cooktop must be installed no less than 600mm between the highest
part of the burner and the Rangehood.
The recommendation for Qasair Wallmount Rangehoods is that they be installed between 700 to 800mm above the
highest part of the burner. When the Rangehood is installed in a galley or partially enclosed kitchen the Rangehood
can be installed between 900 to 1000mm above the highest part of the burner.
Qasair Island Rangehoods should not be installed any higher than 800mm above the highest part of the burner as
any movement around the bench will result in fumes being drawn out from the catchment area of the Rangehood
with the exception of the Thermidor and Liverpool which for aesthetic reasons is installed ush with the ceiling.
Ducting
1. Every QASAIR Rangehood must be ducted to the outside atmosphere by the use of zinc-alume duct or
non-porous and non-ammable materials. Do not use of any type of exible ducting or plastic PVC piping.
Rangehoods must not be vented into a wall cavity or a ceiling space. Externally ducting the rangehood prevents
a build up of grease, which can be a re risk. Ensure the external outlet vent does not restrict the airow in any
way, as this may result in reduced performance.
2. QASAIR Rangehoods must be ducted in duct work equivalent to the outlet of the rangehood ie: The cross
sectional area of the rangehood outlet and the duct work must be equal. Do not reduce the duct size or have
sharp bends. Enlarge the duct size if the duct is to run 6 metres or longer. Advice from CONDARI is available to
ensure optimum performance. Always use nonammable materials to minimise the risk of re in the duct.
3. Ensure all ducting pieces are correctly tted and sealed with either duct tape or silicone to ensure that fumes
do not escape into the ceiling space and seep into living areas through vents or light ttings.
IMPORTANT INFORMATION

Qasair Rangehoods Installation Instructions 5
Other Important Information
1. Always adequately ventilate the room when the rangehood is in use at the same time as appliances
burning gas or other fuels.
2. WARNING: Incorrect venting will result in additional noise and a reduction in efciency. Exhaust air must not be
discharged into any chimney or ue, which may carry combustible products from other sources.
a) Do not discharge the air-ow from the rangehood into a ue used for exhausting fumes
from burning gas or fuel;
b) For cleaning purposes please refer to page 47 of installation instructions for stainless steel;
c) If cleaning is not carried out in accordance with the instructions as listed on page 47, there may be an
increased risk of re;
d) Some parts of the rangehood may become hot when cooking;
e) This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
3. The installation and tting of the rangehood should be done in such a way that will allow the unit to be removed
if service is required. Additional costs incurred in the removal of wall tiles, damage to walls or bench tops are not
covered by warranty.
4. To reduce the risk of xing screws coming in contact with live parts, do not drill or screw into the rangehood.
Live wires are encapsulated where possible to prevent user contact. If necessary drill from the inside out and
only through single sheet material.
5. NOTE: CONDARI recommend an air movement of between 1000 to 1400 cubic metres per hour over an indoor
barbecue, depending on the length of the duct run. Ensure a twin motor unit is installed over indoor barbecues
for optimum results. Barbecues should be positioned under the centre of the hood where the fans are mounted
and not near the outer edges where leakage may occur.
6. The lights in the rangehoods are LED and come with a night light except for D400L-1 and SEN400L-1.
7. If the supply cord is damaged, an authorised service centre or licensed electrician must replace it.
8. Do not ambé under the rangehood.
9. QASAIR domestic rangehoods must not to be used over barbecues approved for outdoor use only,
CONDARI make a range of hoods specically for outdoor barbecues in alfresco areas under the CONDOR
name.
10. CONDARI can manufacture rangehoods to be used over commercial cookers in domestic applications.
12. NOTE: Ensure all requirements are met with gas and electrical regulations and or state authorities.

Qasair Rangehoods Installation Instructions
6
INSTALLATION INSTRUCTIONS
• 4F
• PRE / FRA
• MA
• SQ 420 / MOL
• FPR
• BUR / BEL
• D 400 / D 500 / SEN
It is recommended that the rangehood be mounted 100mm back from the edge of the benchtop.
1. The rangehood can be installed between 700mm and 800mm above the cooking surface. The installer should
check for local requirements in case additional provisions apply.
2. It is advisable to remove fans for easier handling of unit by removing retaining bolts or clips and unplugging
electrical connector.
3. Measure hole centres and duct size on top of the rangehood. This will vary with the hood size, model and
number of fans fitted and will determine the ducting required.
4. Using a plumb line, mark the ceiling before making the cut out. Check for obstructions like electrical cables etc.
5. Cut two (2) supporting beams approximately 1.0m long and pre-drill hole centres so that the supporting beams
are 90 degrees to the ceiling joists.
6. Fit 8mm all thread (threaded rod) through holes provided and secure with nuts and washers.
7. Level unit by tensioning the 8mm nuts. Do not over tighten.
8. Fit off ducting as required.
Installation Suggestions
1) 2)

Qasair Rangehoods Installation Instructions
7
4 Flare
Technical Specification Sheet
4F Ceiling Mounted
PMS 539C
R= 0
G= 48
B= 73
PMS 5503C
R= 156
G= 197
B= 202
Model 4F 1000L-2 4F 1200L-2
Body Width 429mm x 260mm
Corner Type
Condari Pty Ltd.
All-thread
Fixing Centres
Conversion
Top/Back Back/Top
Filter Size
3
YES
PowderKote 
Available
300mm x 200mm
Version: D 20/03/2017F Page 1 of 1
380mm
Maximum Height
(H =)
350mm x 200mm
YES
Round
1660mm
N/A
480mm
6
Cool
2
4
430mm
Light Qty
Filter Qty
Light Centres
Nightlight
Motor Qty
LED Light
Motor Box /
Flue Width
Minimum Height
(H =)
Round
YES
Model4F 1200L-24F 1000L-2
10 Amp Lead
Cool
1000mm
350mm
2
400mm
1200mm
YES
2
Electrical Connection 10 Amp Lead
N/A
355mm x 250mm
480mm
1660mm
Power Entry
Ø15mm Radius
Power Entry
A Transition is supplied to suit standard DL2 ducting.
B
o
d
y
W
i
d
t
h
F
l
u
e
W
i
d
t
h
700
80
480
H
250
Ø15mm Radius
A
l
l
-
T
h
r
e
a
d
1
1
5
B
o
d
y
W
i
d
t
h
F
l
u
e
W
i
d
th
1
1
5
A
ll
-
T
h
r
e
a
d
210
2
6
0
A
l
l
-
T
h
r
e
a
d
A
l
l
-
T
h
r
e
a
d
2
6
0
4 FLARE - 4F

Qasair Rangehoods Installation Instructions
8
President
Technical Specification Sheet
PRE Ceiling Mounted
PMS 539C
R= 0
G= 48
B= 73
PMS 5503C
R= 156
G= 197
B= 202
Model
Body Width
Motor Box /
Flue Width
PRE 1000L-2
Condari Pty Ltd.
Corner Type
Motor Qty
Nightlight
Light Qty
All-thread
Fixing Centres
Maximum Height
(H =)
6
380mm430mm
Cool
4
Filter Qty
Light Centres
LED Light
360mm x 320mm 360mm x 320mm
1600mm
YES
429mm x 260mm
PRE 1000L-2
Electrical Connection
NO
550mm
10 Amp Lead
Version: D 28/03/2017F
Round
550mm
YES
Page 1 of 2
Round
1000mm
420mm
2
YES
2
PRE 1200L-2 Model
1600mm
NO
10 Amp Lead
PowderKote 
Available
Minimum Height
(H =)
3
Cool
YES
2
1200mm
420mm
Filter Size
Conversion
Top/Back Back/Top
PRE 1200L-2
355mm x 250mm
Power Entry
B
o
d
y
W
i
d
t
h
100
H
85 85250
420
1
4
0
M
o
t
o
r
B
o
x
W
i
d
t
h
2
5
0
A
ll
-
T
h
r
e
a
d
A
l
l
-
T
h
r
e
a
d
5
0
700
Ø15mm Radius
5
0
B
o
d
y
W
i
d
t
h
M
o
t
o
r
B
o
x
W
i
d
t
h
Power Entry
2
5
0
A
l
l
-
T
h
r
e
a
d
1
4
0
A
l
l
-
T
h
r
e
a
d
5
0
5
0
Ø15mm Radius
PRESIDENT - PRE

Qasair Rangehoods Installation Instructions
9
President
Technical Specification Sheet
PRE Ceiling Mounted
ModelPRE 1800L-3PRE1500L-3Model
Body Width
Nightlight
Light Qty
Minimum Height
(H =)
All-thread
Fixing Centres
Light Centres
LED Light
Filter Qty
Motor Qty
Motor Box /
Flue Width
Corner Type
Maximum Height
(H =)
Electrical Connection
Conversion
Top/Back Back/Top
Condari Pty Ltd.
PowderKote 
Available
Filter Size
Page 1 of 2
3
Cool
YES
8
510mm
3
1500mm
900mm 900mm
1800mm
4
Cool
3
422mm
10
YES
840mm x 320mm
Round
YES
840mm x 320mm
YES
1600mm
PRE 1800L-3
10 Amp Lead
550mm
PRE 1500L-3
NO
340mm x 260mm
NO
340mm x 260mm
10 Amp Lead
Round
Version: D 28/03/2017F
1600mm
550mm
250
85
H
100
B
o
d
y
W
i
d
t
h
B
o
d
y
W
i
d
t
h
85
1
4
0
M
o
t
o
r
B
o
x
W
i
d
t
h
M
o
t
o
r
B
o
x
W
i
d
t
h
420
A
l
l
-
T
h
r
e
a
d
5
0
A
l
l
-
T
h
r
e
a
d
1
4
0
A
l
l
-
T
h
r
e
a
d
4
5
0
5
0
A
l
l
-
T
h
r
e
a
d
Power Entry
700
Ø15mm Radius
Ø15mm Radius
Power Entry
4
5
0
5
0
5
0
PRESIDENT - PRE

Qasair Rangehoods Installation Instructions
10
Franklyn
Technical Specification Sheet
FRA Ceiling Mounted
Model
Body Width
Motor Box /
Flue Width
FRA 1000L-2
Condari Pty Ltd.
Corner Type
Motor Qty
Nightlight
Light Qty
All-thread
Fixing Centres
Maximum Height
(H =)
6
380mm430mm
Cool
3
Filter Qty
Light Centres
LED Light
360mm x 320mm 360mm x 320mm
1600mm
N/A
429mm x 260mm
FRA 1000L-2
Electrical Connection
NO
550mm
10 Amp Lead
Version: C 12/12/2017F
Square
550mm
N/A
Page 1 of 2
Square
1000mm
420mm
2
YES
2
FRA 1200L-2 Model
1600mm
NO
10 Amp Lead
PowderKote }
Available
Minimum Height
(H =)
3
Cool
YES
2
1200mm
420mm
Filter Size
Conversion
Top/Back Back/Top
FRA 1200L-2
350mm x 250mm
Power Entry
700
100
H
85 85250
420
Front
Front
Power Entry
FRANKLYN - FRA

Qasair Rangehoods Installation Instructions
11
840mm x 320mm
Square
840mm x 320mm
Square
N/A
550mm
10 Amp Lead
NO NO
1600mm
10 Amp Lead
PowderKote
}
Available
All-thread
Fixing Centres
3
Cool
1800mm
900mm
Maximum Height
(H =)
43
510mm
10
422mm
8
Cool
YES YES
900mm
1500mm
3
FRA 1500L-3 FRA 1800L-3
N/A
550mm
340mm x 260mm 340mm x 260mm
1600mm
Model
Conversion
Top/Back Back/Top
FRA 1800L-3
Corner Type
Electrical Connection
Minimum Height
(H =)
FRA 1500L-3
Condari Pty Ltd.
Filter Size
LED Light
Filter Qty
Motor Box /
Flue Width
Motor Qty
Light Centres
Light Qty
Nightlight
Model
Body Width
Version: C 12/12/2017F Page 2 of 2
Franklyn
Technical Specification Sheet
FRA Ceiling Mounted
Power Entry
250
85
H
100
700
85
420
Front
Front
Power Entry
FRANKLYN - FRA

Qasair Rangehoods Installation Instructions
12
Maddison
Technical Specification Sheet
MA Ceiling Mounted
Light Centres
Filter Qty
All-thread
Fixing Centres
Varies depending on
length of rangehood
Varies depending on
length of rangehood Corner Type
Page 1 of 1
PowderKote }
Available
Condari Pty Ltd.
Varies depending on
length of rangehood
YES
Varies depending on
length of rangehood
Nightlight
Light Qty
Varies depending on
length of rangehood
Varies depending on
length of rangehood
2000mm-2500mm
Model MA 2500-3000L-4
420mm
Model
Body Width
LED Light
410 Amp Lead
550mm
Motor Qty
1600mmYES
CoolCool
4
Filter Size2500mm-3000mm
MA 2000-2500L-4
420mm Conversion
Top/Back Back/Top
Motor Box /
Flue Width
360mm x 250mm
Square
Version: C 31/05/2017F
10 Amp Lead
360mm x 250mm
Square
MA 2000-2500L-4
Varies depending on
length of rangehood
N/A
N/A
MA 2500-3000L-4
N/A
Maximum Height
(H =)
Electrical Connection
Minimum Height
(H =)
N/A
Varies depending on
length of rangehood
1600mm
550mm
H
Motor Box
Width
Motor Box
Width
250 250
420
250
Flues are equally spaced
across the body width.
Power Entry.
150
2020
Body Width 700
Equal Equal Equal
MADDISON - MA

Qasair Rangehoods Installation Instructions
13
Winton
Technical Specification Sheet
SQ 420 Ceiling Mounted
Conversion
Top/Back Back/Top
Filter Size
Model
Electrical Connection
Minimum Height
(H =)
Maximum Height
(H =)
PowderKote 
Available
All-thread
Fixing Centres
Page 1 of 1
Corner Type
YES
Filter Qty 1
Motor Qty
Light Qty
Light Centres
Motor Box /
Flue Width
Body Width
Model
Cool
YES
1
SQ 420L-2
2
420mm
N/A
Centre
LED Light
Nightlight
Condari Pty Ltd.
10 Amp Lead
SQ 420L-2
Square
Version: B 27/11/2014F
NO
250mm X 320mm
1450mm
520mm
355mm
x 250mm
Front
Power Entry.
420420
H
8525085852508
5
WINTON - SQ420

Qasair Rangehoods Installation Instructions
14
Molina
Technical Specification Sheet
MOL Ceiling Mounted
Conversion
Top/Back Back/Top
Filter Size
Model
Electrical Connection
Minimum Height
(H =)
Maximum Height
(H =)
PowderKote 
Available
All-thread
Fixing Centres
Page 1 of 1
Corner Type
N/A
Filter Qty 1
Motor Qty
Light Qty
Light Centres
Motor Box /
Flue Width
Body Width
Model
Cool
YES
1
MOL 420L-2
2
420mm
N/A
Centre
LED Light
Nightlight
Condari Pty Ltd.
10 Amp Lead
MOL 420L-2
Square
Version: B 27/11/2014F
NO
250mm X 320mm
1100mm
520mm
355mm
x 250mm
8525085
420420
852508
5
Power Entry.
H
Front
MOLINA - MOL

Qasair Rangehoods Installation Instructions
15
D
E
F
G
Fremont
Technical Specification Sheet
FPR Ceiling Mounted
PMS 539C
R= 0
G= 48
B= 73
PMS 5503C
R= 156
G= 197
B= 202
Light Centres
Filter Qty
All-thread
Fixing Centres
Varies depending on
length of rangehood
Varies depending on
length of rangehood Corner Type
Page 1 of 1
PowderKote

Available
Condari Pty Ltd.
Varies depending on
length of rangehood
YES
Varies depending on
length of rangehood
Nightlight
Light Qty
Varies depending on
length of rangehood
Varies depending on
length of rangehood
1600mm-2600mm
Model FPR 2600-3600L-2
420mm
Model
Body Width
LED Light
210 Amp Lead
550mm
Motor Qty
1600mm
YES
CoolCool
2
Filter Size
2600mm-3600mm
FPR 1600-2600L-2
420mm Conversion
Top/Back Back/Top
Motor Box /
Flue Width
360mm x 250mm
Square
Version: B 31/06/2017F
10 Amp Lead
360mm x 250mm
Square
FPR 1600-2600L-2
Varies depending on
length of rangehood
N/A
N/A
FPR 2600-3600L-2
N/A
Maximum Height
(H =)
Electrical Connection
Minimum Height
(H =)
N/A
Varies depending on
length of rangehood
1600mm
550mm
Power Entry.
Motor Box can be
either L/H or R/H
A
l
l
-
T
h
r
e
a
d
700
150
H
250 20
420
5
0
A
ll
-
T
h
r
e
a
d
1
4
0
M
o
t
o
r
B
o
x
W
i
d
t
h
Support Alternatives
Rigging Round Square Square w-cross brace
Ø16mm S-S Tube 25mm x 25mm SQ S-S Tube 25mm x 25mm SQ S-S Tube
These centre dimensions are
typical for all support fixings
2
8
2
8
B
O
D
Y
W
I
D
T
H
FREMONT - FPR

Qasair Rangehoods Installation Instructions
16
Burdett
Technical Specification Sheet
BUR Ceiling Mounted
Motor Box /
Flue Width
Body Width
LED Light
Motor Qty
Model
PowderKote }
Available
Maximum Height
(H =)
N/A
BUR 1000L-2
1000mm
Cool
BUR 1200L-2
6
380mm All-thread
Fixing Centres
Corner Type
Condari Pty Ltd.
Light Centres
Light Qty
Nightlight
Page 1 of 2
Filter Qty
Electrical Connection
Conversion
Top/Back Back/Top
Model
Minimum Height
(H =) 400mm
NO
10 Amp Lead
429mm x 260mm
BUR 1000L-2
4
430mm
YES
500mm x 1000mm
1450mm
Square
500mm x 800mm
Square
1450mm
YES
10 Amp Lead
Version: D 28/03/2017F
YES23
YES
N/A
Cool
2
1200mm
2
Filter Size 355mm x 250mm
400mm
BUR 1200L-2
NO
Power entry location
is the same for all
Burdett models.
700
H
250
Front
Front
BURDETT - BUR

Qasair Rangehoods Installation Instructions
17
Burdett
Technical Specification Sheet
BUR Ceiling Mounted
Version: D 28/03/2017F
500mm x 1000mm
Square
500mm x 1300mm
Square
400mm
1450mm
10 Amp Lead
BUR 1500L-3
NO
340mm x 260mm
YES
BUR 1200L-3
NO
355mm x 250mm
Page 2 of 2
YES
400mm
1450mm
10 Amp Lead
Body Width
Motor Box /
Flue Width
Nightlight
Motor Qty
LED Light
Light Qty
N/A
3
Cool
YES
3
N/A
3
Cool
YES
8
510mm
3
BUR 1500L-3
1500mm
Model
1200mm
BUR 1200L-3
Filter Qty 6
Light Centres 380mm
Condari Pty Ltd.
Corner Type
PowderKote }
Available
Conversion
Top/Back Back/Top
Filter Size
Model
Electrical Connection
Maximum Height
(H =)
All-thread
Fixing Centres
Minimum Height
(H =)
Power entry location
is the same for all
Burdett models.
700
H
Front
Front
BURDETT - BUR

Qasair Rangehoods Installation Instructions
18
Belgrad
Technical Specification Sheet
BEL Ceiling Mounted
Motor Box /
Flue Width
Body Width
LED Light
Motor Qty
Model
PowderKote }
Available
Maximum Height
(H =)
N/A
BEL 1000L-2
1000mm
Cool
BEL 1200L-2
6
380mm All-thread
Fixing Centres
Corner Type
Condari Pty Ltd.
Light Centres
Light Qty
Nightlight
Page 1 of 2
Filter Qty
Electrical Connection
Conversion
Top/Back Back/Top
Model
Minimum Height
(H =) 400mm
NO
10 Amp Lead
429mm x 260mm
BEL 1000L-2
4
430mm
YES
500mm x 900mm
1450mm
Square
500mm x 800mm
Square
1450mm
N/A
10 Amp Lead
Version: C 13/12/2017F
N/A23
YES
N/A
Cool
2
1200mm
2
Filter Size 355mm x 250mm
400mm
BEL 1200L-2
NO
Power entry location
is the same for all
Belgrad models.
700
H
250
Front
Front
BELGRAD - BEL

Qasair Rangehoods Installation Instructions
19
Belgrad
Technical Specification Sheet
BEL Ceiling Mounted
Version: C 13/12/2017F
500mm x 1000mm
Square
500mm x 1300mm
Square
400mm
1450mm
10 Amp Lead
BEL 1500L-3
NO
340mm x 260mm
N/A
BEL 1200L-3
NO
355mm x 250mm
Page 2 of 2
N/A
400mm
1450mm
10 Amp Lead
Body Width
Motor Box /
Flue Width
Nightlight
Motor Qty
LED Light
Light Qty
N/A
3
Cool
YES
3
N/A
3
Cool
YES
8
510mm
3
BEL 1500L-3
1500mm
Model
1200mm
BEL 1200L-3
Filter Qty 6
Light Centres 380mm
Condari Pty Ltd.
Corner Type
PowderKote }
Available
Conversion
Top/Back Back/Top
Filter Size
Model
Electrical Connection
Maximum Height
(H =)
All-thread
Fixing Centres
Minimum Height
(H =)
Power entry location
is the same for all
Belgrad models.
700
H
Front
Front
BELGRAD - BEL

Qasair Rangehoods Installation Instructions
20
Albany
Technical Specification Sheet
DCeiling Mounted
Light Centres
Filter Qty
All-thread
Fixing Centres
Centre
1Corner Type
Page 1 of 1
PowderKote 
Available
Condari Pty Ltd.
1
NO
Centre
Nightlight
Light Qty
1
1
400mm
Model D 500L-2
N/A
Model
Body Diameter
LED Light
110 Amp Lead
550mm
Motor Qty
1500 mm
YES
CoolCool
2
Filter Size500mm
D 400L-1
N/A Conversion
Top/Back Back/Top
Motor Box /
Flue Width
300mm
x 160mm
N/A
Version: A 01/07/2014F
10 Amp Lead
410mm
x 160mm
N/A
D 400L-1
272mm
x 272mm
N/A
N/A
D 500L-2
N/A
Maximum Height
(H =)
Electrical Connection
Minimum Height
(H =)
N/A
379mm
x 290mm
1500mm
650mm
Power Entry.
Power Entry.
All-
Thread
All-Thread
235
110
Body DiameterBody
Diameter
All-Thread
All-Thread
250
250
90
D400 & D500
Instructions
1. Remove Rangehood from packaging and place on a flat clean surface.
2. Remove the filter.
3. Remove the four screws in the corners of the filter apperture.
4. Gently pull the base from the tube.
5.Onceremoved,thepowersupplyplug
becomesvisible.Disconnectandplace
thebaseassemblytooneside.

6.PlacethefourlengthsofAll'threadRod
throughtheholesinthehoodand(make
suretheseamisfacingtherightdirection)
securethroughabraceintheceiling.Feed
theplugandcordintotheceilingspace.

7.FitnutstotopandbottomofAll'thread
Rodsandtighten.

8.Reconnectthepowerplugandreinstall
baseassembly.

9.Connectpowersupplyinceilingandtest
Rangehood.
10.Fitoffductingasrequired.
Donotuseflexibleducting.
Donotreduceductsize.
Allductpiecesareavailablefrom
'Condari'orthroughyourdealer.
1. Remove Rangehood from packaging and place on a at clean surface.
2. Remove the lter.
3. Remove the four screws in the corners of the lter apperture.
4. Gently pull the base from the tube.
5. Once removed, the power supply and fan plug becomes visible. Disconnect and
place the base assembly to one side.
6. Place the four lengths of All-thread Rod through the holes in the hood and (make
sure the seam is facing the right direction) secure through a brace in the ceiling.
Feed the plug and cord into the ceiling space.
7. Fit nuts to top and bottom of All-thread Rods and tighten.
8. Reconnect the power plug and reinstall base assembly.
9. Connect power supply in ceiling and test Rangehood.
10. Fit off ducting as required
D 400L-1 / SEN 400L-1
D 500L-2 / SEN 500L-2