Electronic components and circuits are sensitive to
ElectroStatic Discharge (ESD). When handling any circuit
board assemblies, it is recommended that ESD safety
precautions be observed. ESD safe best practices
include, but are not limited to:
· Leaving circuit boards in their antistatic packaging until
they are ready to be installed.
· Using a grounded wrist strap when handling circuit
boards, at a minimum you should touch a grounded
metal object to dissipate any static charge that may be
present on you.
· Only handling circuit boards in ESD safe areas, which
may include ESD floor and table mats, wrist strap stations
and ESD safe lab coats.
· Avoiding handling circuit boards in carpeted areas.
· Try to handle the board by the edges, avoiding contact
with components.
ESD WARNING NOTICE
SHEET 2 OF 12 CTIX-00482(0.02) 07/12/2018
