Connect Tech PCI-104 User manual

1
Xtreme/SBC PCI-104 Single Board
Computer & PCI-104 Qseven Carrier
Board
Connect Tech Inc. Tel: [phone]
42 Arrow Road Toll: 800-426-8979 (North America only)
Guelph, Ontario Fax: [phone]
N1K 1S6 Email: [e-mail]
www.connecttech.com [e-mail]
CTIM-00060 Revision 0.07 2017-08-08

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 2 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
Table of Contents
Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board........................................ 1
Customer Support Overview .......................................................................................................................... 4
Contact Information........................................................................................................................................ 4
Limited Product Warranty.............................................................................................................................. 5
Copyright Notice ............................................................................................................................................ 5
Trademark Acknowledgment ......................................................................................................................... 5
Revision History............................................................................................................................................. 5
Introduction .................................................................................................................................................... 6
Features..................................................................................................................................................................... 6
System Block Diagram ............................................................................................................................................. 7
Hardware Description..................................................................................................................................... 8
Connector Locations................................................................................................................................................. 8
Qseven Module Interface.......................................................................................................................................... 9
Description..................................................................................................................................................... 9
Connector....................................................................................................................................................... 9
Graphics.................................................................................................................................................................... 9
VGA.................................................................................................................................................................. 9
Description..................................................................................................................................................... 9
Connector....................................................................................................................................................... 9
LVDS...............................................................................................................................................................10
Description....................................................................................................................................................10
Connectors & Jumpers..................................................................................................................................10
Gigabit Ethernet...................................................................................................................................................... 13
Description....................................................................................................................................................13
Connector & LEDs .......................................................................................................................................13
USB 2.0................................................................................................................................................................... 14
Description....................................................................................................................................................14
Connector......................................................................................................................................................14
SATA...................................................................................................................................................................... 15
Description....................................................................................................................................................15
PCI-104................................................................................................................................................................... 16
Description....................................................................................................................................................16
Connectors....................................................................................................................................................16
LPC Super I/O ........................................................................................................................................................ 17
Serial....................................................................................................................................................................... 17
Description....................................................................................................................................................17
Connectors....................................................................................................................................................18
PS/2 Keyboard and Mouse...................................................................................................................................... 19
Description....................................................................................................................................................19
Connectors & Jumpers..................................................................................................................................19
Power...................................................................................................................................................................... 20
Description....................................................................................................................................................20
Using a PCI-104 Power Supply (Providing Power Through the PCI-104 Bus Connector)...........................20
Recommended Connect Tech Power Supplies..............................................................................................20
Connectors & Jumpers..................................................................................................................................21
Fan Control............................................................................................................................................................. 23

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 3 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
Description....................................................................................................................................................23
Connectors & Jumpers..................................................................................................................................23
Battery..................................................................................................................................................................... 24
Description....................................................................................................................................................24
Connector & LEDs .......................................................................................................................................24
Hardware Installation ....................................................................................................................................25
Software Installation & Configuration ..........................................................................................................26
Operating System Notes.......................................................................................................................................... 26
Linux................................................................................................................................................................26
General..........................................................................................................................................................26
US15W Specific ...........................................................................................................................................26
Windows..........................................................................................................................................................26
General..........................................................................................................................................................26
US15W Specific ...........................................................................................................................................26
Cables & Interconnect...................................................................................................................................27
Dimensions....................................................................................................................................................28
Specifications ................................................................................................................................................29

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 4 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
Customer Support Overview
If you experience difficulties after reading the manual and/or using the product, contact the
Connect Tech reseller from which you purchased the product. In most cases the reseller can help
you with product installation and difficulties.
In the event that the reseller is unable to resolve your problem, our highly qualified support staff
can assist you. Our support section is available 24 hours a day, 7 days a week on our website at:
www.connecttech.com/sub/support/support.asp. See the contact information section below for
more information on how to contact us directly. Our technical support is always free.
Contact Information
We offer three ways for you to contact us:
Mail/Courier
You may contact us by letter at:
Connect Tech Inc.
Technical Support
42 Arrow Road
Guelph, Ontario
Canada N1K 1S6
Email/Internet
You may contact us through the Internet. Our email and URL addresses on the Internet are:
[email protected]m
[email protected]m
www.connecttech.com
Note:
Please go to the Download Zone or the Knowledge Database in the Support Center on the Connect
Tech website for product manuals, installation guides, device driver software and technical tips.
Submit your technical support questions to our customer support engineers via the Support Center
on the Connect Tech website.
Telephone/Facsimile
Technical Support representatives are ready to answer your call Monday through Friday, from
8:30 a.m. to 5:00 p.m. Eastern Standard Time. Our numbers for calls are:
Toll Free: 800-426-8979 (North America only)
Telephone: [phone] (Live assistance available 8:30 a.m. to 5:00 p.m. EST,
Monday to Friday)
Facsimile: 519-836-4878 (on-line 24 hours)

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 5 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
Limited Product Warranty
Connect Tech Inc. provides a two-year Warranty for the Xtreme/SBC PCI-104 Single Board
Computer. Should this product, in Connect Tech Inc.'s opinion, fail to be in good working order
during the warranty period, Connect Tech Inc. will, at its option, repair or replace this product at
no charge, provided that the product has not been subjected to abuse, misuse, accident, disaster or
non-Connect Tech Inc. authorized modification or repair.
You may obtain warranty service by delivering this product to an authorized Connect Tech Inc.
business partner or to Connect Tech Inc. along with proof of purchase. Product returned to
Connect Tech Inc. must be pre-authorized by Connect Tech Inc. with an RMA (Return Material
Authorization) number marked on the outside of the package and sent prepaid, insured and
packaged for safe shipment. Connect Tech Inc. will return this product by prepaid ground
shipment service.
The Connect Tech Inc. Limited Warranty is only valid over the serviceable life of the product.
This is defined as the period during which all components are available. Should the product prove
to be irreparable, Connect Tech Inc. reserves the right to substitute an equivalent product if
available or to retract the Warranty if no replacement is available.
The above warranty is the only warranty authorized by Connect Tech Inc. Under no
circumstances will Connect Tech Inc. be liable in any way for any damages, including any lost
profits, lost savings or other incidental or consequential damages arising out of the use of, or
inability to use, such product.
Copyright Notice
The information contained in this document is subject to change without notice. Connect Tech
Inc. shall not be liable for errors contained herein or for incidental consequential damages in
connection with the furnishing, performance, or use of this material. This document contains
proprietary information that is protected by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced, or translated to another language without the prior
written consent of Connect Tech, Inc.
Copyright

1997 - 2016 by Connect Tech, Inc.
Trademark Acknowledgment
Connect Tech, Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred
to in this document as the property of their respective owners.
Not listing all possible trademarks or copyright acknowledgments does not constitute a lack of
acknowledgment to the rightful owners of the trademarks and copyrights mentioned in this
document.
Revision History
Revision 0.00 –January 10, 2011
Revision 0.01 –March 4, 2011
Revision 0.02 –May 31, 2012
Revision 0.03 –February 22, 2013
Revision 0.04 –June 15, 2016
Revision 0.05 –June 20, 2016
Revision 0.06 –February 13, 2017

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 6 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
Revision 0.07 –August 08, 2017: Added cable drawing links, Updated format
Introduction
Xtreme/SBC PCI-104 Single Board Computer
Connect Tech’s Xtreme/SBC PCI-104 Single Board Computers offer a variety of embedded
processor options including Intel Atom, Freescale i.MX51, TI OMAP and NVIDIA Tegra.
Xtreme/SBC solutions are modular and completely scalable, with access to current embedded
processors that are easily upgradable to accommodate future generations of Intel Atom processors,
such as Intel Atom E6xx, or ARM based processors, such as Cortex A8.
The on-board connectors of our Xtreme/SBC products provide access to SATA, USB, Ethernet,
LVDS and VGA Video, and RS-232 & RS-422/485.
To learn more about Connect Tech’s Xtreme/SBC PCI-104, visit http://connecttech.com/product-
category/technology/sbc/
PCI-104 Qseven Carrier Board
Connect Tech’s PCIe/104 Qseven Carrier Board solutions are small embedded carrier boards that
allow complete integration with industry standard Qseven modules. Using any off-the-shelf
Qseven module provides a variety of embedded processor options including Intel Atom, Freescale
i.MX51, TI OMAP and NVIDIA Tegra. This modular approach easily accommodates future
generations of Intel Atom processors, such as Intel Atom E6xx, or ARM based processors, such as
Cortex A8. The on-board connectors of our Qseven products provide easy access to SATA, USB,
Ethernet, LVDS and VGA Video, and RS-232 & RS-422/485.
What is Qseven?
Qseven is an off-the-shelf, multi-vendor, Computer-on-Module that integrates the core
components of a common PC, and mounts onto an application specific carrier board. Qseven
modules have a standardized form factor of 70mm x 70mm and specify a PCIe style edge
connector which interfaces to a low cost, high performance MXM socket on the carrier board.
This single ruggedized MXM connection provides all the Qseven interfaces including: graphics,
audio, mass storage, network, and multiple USB ports.
To learn more about Connect Tech’s Xtreme/SBC PCI-104, visit http://connecttech.com/product-
category/form-factors/qseven/
Features
Qseven module carrier
PCI-104 form factor
Support for up to 4 PCI-104 Devices
Dual display, VGA (via SDVO) and 1x24 LVDS
2x SATA
2x RS232
2x RS485
1x 10/100/1000 Ethernet
ATX power input or +5V/+12V only operation

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 7 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
System Block Diagram
The Qseven module implements the core processing features including: processor, memory, and system
physical interfaces via the southbridge.
Many of the Qseven modules are based on the mobile Intel Atom architecture (Z series processor + Poulsbo
/ SCH US15W chipset); shown in the block diagram below.
This document will generally refer to the features of the US15W.

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 8 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
Hardware Description
Connector Locations
Xtreme/SBC PCI-104 –Top
Xtreme/SBC PCI-104 –Bottom
Connector Summary
Jumper Summary
Location
Connection
P1
Q7
P2
PCI-104
P3A, P3B
USB
P4
GBE
P5
VGA
P6
ATX Power
P7
LVDS Video
P8
LVDS Backlight
P9
RS232 serial
P10A, P10B
SATA
P11
RS485 serial
P12
PCI-104
P13
PS/2 Keyboard & Mouse
P14
Fan Power
P16
Battery holder
Jumper
Function
J1
PS/2 power
J2
Fan Power
J3
Fan PWM polarity
J4
LVDS panel power
J5
LVDS backlight
enable polarity
J6
LVDS Backlight
Power
J7
Suspend Selection
J8
Power Supply On
J9
Power Button

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 9 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
Qseven Module Interface
Description
The processor and Chipset are implemented on the Qseven CPU module, which connects to the
Xtreme/SBC PCI-104 via a MXM connector. As previously mentioned, many of the existing Qseven
Modules use the Intel Atom mobile architecture, Z series processor + Poulsbo / SCH US15W chipset. The
Xtreme/SBC PCI-104 implements a subset of the Qseven features, as describe in the introduction.
For a list of Qseven module vendors, visit http://www.qseven-standard.org/
Connector
Function
Qseven interface
Location
P1
Type
MXM
Foxconn AS0B326-S78N-7F (or equivalent)
Pinout
Refer to Qseven specification
Graphics
The availability of the graphics interfaces depends on the Qseven module selected.
US15W: The US15W chipset provides GMA 500 graphics sub-system and provides two display interfaces:
SDVO (serial digital video output) and LVDS (low voltage differential signalling). The resolution is
generated by the by GMA 500 is limited 1280x1024.
The configuration of either interface as the primary or secondary display depends on the Qseven module’s
BIOS capabilities and settings. Refer to the Qseven module’s documentation for more details.
VGA
Description
The VGA interface is implemented using the Qseven SDVO interface, with a SDVO to VGA converter
(Chrontel CH7317B) which supports resolutions up to 1920x1200; however actually resolutions depend on
the Qseven module.
Connector
Function
VGA graphics
Location
P5
Type
2x5 2mm header
MLE TSHSM-205-D-06-G-V-L (or equivalent)
Pinout
Pin
Signal
Pin
Signal
1
DAC_RED
2
GND
3
DAC_GREEN
4
N/C
5
DAC_BLUE
6
SC_DDC
7
HSYNC
8
SD_DDC
9
VSYNC
10
GND

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 10 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
LVDS
Description
The Xtreme/SBC PCI-104 provides dual 18 or 24 bit LVDS display channels via P7, which are connected
directly from the Qseven module . LVDS panel supply power is selected with jumper J4 and backlight
power is selected with jumper J6. Both are current limited to 500 mA.
US15W: The US15W provides only a single 18 or 24 bit display channel. Each LVDS data pair carries two
bits, each channel has four data pairs.
Connectors & Jumpers
Function
LVDS Graphics
Location
P7
Type
Hirose DF14-30P-1.25H connector
Pinout
Pin
Signal
Description
1
VCC_PNL
Panel Power
2
VCC_PNL
Panel Power
3
GND
Digital ground
4
GND
Digital ground
5
LVDS_A3_N
Channel A Data
6
LVDS_A3_P
Channel A Data
7
LVDS_CLK_N
Channel A Clock
8
LVDS_ACLK_P
Channel A Clock
9
GND
Digital ground
10
LVDS_A2_N
Channel A Data
11
LVDS_A2_P
Channel A Data
12
LVDS_A1_N
Channel A Data
13
LVDS_A1_P
Channel A Data
14
LVDS_A0_N
Channel A Data
15
LVDS_A0_P
Channel A Data
16
GND
Digital ground
17
LVDS_B3_N
Channel B Data
18
LVDS_B3_P
Channel B Data
19
LVDS_BCLK_N
Channel B Clock
20
LVDS_BCLK_P
Channel B Clock
21
GND
Digital ground
22
LVDS_B2_N
Channel B Data
23
LVDS_B2_P
Channel B Data
24
LVDS_B1_N
Channel B Data
25
LVDS_B1_P
Channel B Data
26
LVDS_B0_N
Channel B Data
27
LVDS_B0_P
Channel B Data
28
GND
Digital ground
29
LVDS_DID_CLK
Display ID Clock
(3.3V)
30
LVDS_DID_DATA
Display ID Data (3.3V)

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 11 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
Function
LVDS backlight power
Location
P8
Type
Hirose DF13-8P-1.25H connector
Pinout
Pin
Signal
Description
1
+12V
+12 V DC, max. 1A
2
+12V
+12 V DC, max. 1A
3
+5V
+5 V DC, max. 1A
4
+5V
+5 V DC, max. 1A
5
LVDS_BLEN
Backlight enable,
level selected with J4
6
VCC_BKL
Back light power,
selected with J6
7
GND
Digital ground
8
GND
Digital ground
Function
LVDS backlight power select
Selects either +12V or +5V. Refer to the
display panel’s documentation for proper
configuration.
Location
J6
Type
1x3 0.100” jumper block
Pinout
Position
Description
1-2
+12V
2-3
+5V
off
floating
Default
+12V
Function
LVDS panel power select
Selects either +3.3V or +5V. Refer to the
display documentation for proper
configuration.
Location
J4
Type
1x3 0.100” jumper block
Pinout
Position
Description
1-2
+3.3V
2-3
+5V
off
floating
Default
+3.3V

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 12 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
Function
LVDS backlight enable polarity
Selects either positive or negative. Refer to the inverter
power supply documentation for proper configuration.
Location
J5
Type
1x2 2mm jumper block
Pinout
Position
Description
off
Positive polarity
on
Negative polarity
Default
Positive polarity

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 13 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
Gigabit Ethernet
Description
The gigabit Ethernet interface’s controller (MAC + PHY) is implemented on the Qseven module, while the
Xtreme/SBC PCI-104 provides the necessary magnetics and termination.
Most Qseven modules support 1000BASE-T, 100BASE-TX, and 10BASE-T standards with either a
Realtek 8111 or Intel 82574 PCIe Ethernet controller.
Connector & LEDs
Function
Gigabit Ethernet
Location
P8
Type
2x5 2mm header
MLE TSHSM-205-D-06-G-V-L (or equivalent)
Pinout
Pin
Signal
Description
Pin
Signal
Description
1
MX1-
Data
2
MX1+
Data
3
MX2-
Data
4
MX2+
Data
5
FGND
Frame
Ground
6
FGND
Frame
Ground
7
MX3-
Data
8
MX3+
Data
9
MX4-
Data
10
MX4+
Data
Function
Ethernet Status LEDs
Locations
Pin
Signal
D9
Activity
D10
1000BASE-T Link
D11
100BASE-TX Link
D12
10BASE-T Link

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 14 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
USB 2.0
Description
The Xtreme/SBC PCI-104 implements 4 of the 8 available USB 2.0 connections via two connectors. Over
current protection and power supply filtering is provided.
Only the USB host features of the Qseven specification have been implemented, USB client features are
not supported.
Connector
Function
USB 2.0 x2
Locations
P3A, P3B
Type
Hirose DF13-8P
Pinout
Pin
Signal
Description
1
VCC_USB_0
Port 0 Filtered +5V
2
USB_0_N
Port 0 Data
3
USB_0_P
Port 0 Data
4
USB_GND_0
Port 0 Filtered Digital Ground
5
USB_GND_1
Port 1 Filtered Digital Ground
6
USB_1_N
Port 1 Data
7
USB_1_N
Port 1 Data
8
VCC_USB_1
Port 1 Filtered +5V

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 15 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
SATA
Description
The Xtreme/SBC PCI-104 provides 2 SATA host connections.
US15W: Most Qseven modules based on the US15W, convert the US15W’s IDE interface to one SATA
connection (as IDE master) and one built-in NAND based flash drive (as IDE slave). Consult the Qseven
module’s documentation for more information.
In this case only P10A connector is active
Connector & LEDs
Function
SATA host
Locations
P10A, P10B
Type
Industry standard right angle sata host
connector
Molex 0470804005 (or equivalent)
Pinout
Pin
Signal
1
GND
2
SATA_TX_P
3
SATA_TX_N
4
GND
5
SATA_RX_N
6
SATA_RX_P
7
GND
Function
SATA Status LEDs
Locations
Pin
Signal
D13
Activity

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 16 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
PCI-104
Description
The Xtreme/SBC PCI-104 allows up to 4 PCI-104 add-on boards to be installed in a “stack up”
configuration. The PCI-104 connected through a PCIe to PCI bridge which is attached the first x1 PCIe
lane of the Qseven connector.
Note: The Xtreme/SBC PCI-104 provides 3.3V generated from the +5V input power. The entire +3.3V rail
on the PCI-104 stack is limited to 4A.
Connectors
Function
PCI-104 (Top Stacking Only)
Locations
P2
Type
Industry standard
EPT 264-60303-02
Pinout
(A1 @ Bottom Left Corner)

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 17 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
LPC Super I/O
The Xtreme/SBC PCI-104 implements many low speed legacy I/O features with the SMSC SCH3114
Super I/O, which is connected to the Qseven module via the LPC (Low Pin Count) bus. This Super I/O
device provides 4 serial ports, 2 PS/2, and many other status / control features.
Note: the Qseven specification states that all Qseven modules BIOS implementations must support either
the Winbond W83627 or SMSC SCH3114.
Serial
Description
Two RS232 serial ports are provided on P9 and two RS485 serial ports are provided on P11.
For the RS485 ports, the default configuration is full duplex without any bias or termination. Various
resistors configurations can be populated to enabled TX and RX termination as well as RTS control. The
following diagram shows the available configuration options. Contact Connect Tech’s support department
for further information.
Resistor
Function
Default
R99
Always enable driver
Populated
R101
Always enable receiver
Populated
R156
RTS controlled receiver
R160
RTS controlled driver
R98
Receiver termination
R102
Driver termination
R100
Receiver bias
R97
Receiver bias

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 18 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
Connectors
Function
RS232 x2
Locations
P9
Type
2x10 2mm header
Pinout
Pin
Signal
Pin
Signal
1
DCD1
2
DSR1
3
RXD1
4
RTS1
5
TXD1
6
CTS1
7
DTR1
8
RI1
9
GND
10
N/C
11
DCD2
12
DSR2
13
RXD2
14
RTS2
15
TXD2
16
CTS2
17
DTR2
18
RI2
19
GND
20
N/C
Function
RS485 x2
Locations
P11
Type
2x10 2mm header
Pinout
Pin
Signal
Pin
Signal
1
RXD0+
2
N/C
3
TXD0+
4
N/C
5
TXD0-
6
N/C
7
RXD0-
8
N/C
9
GND
10
N/C
11
RXD1+
12
N/C
13
TXD1+
14
N/C
15
TXD1-
16
N/C
17
TXD1-
18
N/C
19
GND
20
N/C

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 19 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
PS/2 Keyboard and Mouse
Description
A PS/2 keyboard and PS/2 mouse interface are provided via P13; where the PS/2 voltage is selectable with
J1. Refer to the specification printed on the bottom of the keyboard and mouse to determine which voltage
to select; in most cases this is 5V.
Connectors & Jumpers
Function
PS/2 Keyboard and Mouse
Locations
P13
Type
Molex 0532610671 connector
Pinout
Pin
Signal
Description
1
KDAT
Keyboard Data
2
KCLK
Keyboard Clock
3
PS2_GND
Filtered digital ground
4
PS2_VCC
Filtered PS/2 supply voltage, via
J1
5
MDAT
Mouse Data
6
MCLK
Mouse Clock
Function
PS/2 voltage select
Selects either +3.3Vauxiliary or +5V auxiliary.
Location
J1
Type
1x3 0.1” jumper
Pinout
Position
Description
1-2
+3.3V_A
2-3
+5V_A
off
floating
Default
+3.3V

Xtreme/SBC PCI-104 Single Board Computer & PCI-104 Qseven Carrier Board
Users Guide
www.connecttech.com
Document: CTIM-00060
Revision: 0.07
Page 20 of 29
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-08-08
Power
Description
The Xtreme/SBC PCI-104 is designed to be powered from an ATX type power supply, and support many
of the ACPI features like suspend to RAM. A CR1225 battery holder (P16) provides the VBAT for the
Qseven module.
The Xtreme/SBC PCI-104 generates 3.3V on board, to facilitate alternate powering options.
WARNING: If using a PCI-104 power supply that supplies voltages to the Xtreme/SBC PCI-104 through
the PCI-104 connector, you must ensure this power supply DOES NOT supply +3.3V (as this would
conflict with the onboard +3.3V).
Other powering options include
A) +5V & +12V only: The ATX features can be bypassed by powering +5V_SB with same 5 volt supply
as the +5V input pins.
B) +5V only: similar to the above cause, but excluding the +12V which is used only by the backlight and
PCI-104 connector. Before attempting this, verify that this configuration is appropriate for the target
installation.
Using a PCI-104 Power Supply (Providing Power Through the PCI-104 Bus Connector)
When using a PCI-104 Power Supply that provides power over the PCI-104 bus connector ensure the
following:
-The PCI-104 Power Supply should ONLY provide +5V and/or +12V power rails. NOT +3.3V as
mentioned above.
-Install a standard 0.1” pitch jumper on pins 5&6 of the QCG002’s ATX power supply connector
as shown below. This will connect the +5V rail to the +5V-SB rail.
This jumper needs to be done for the following reasons:
oSome Qseven modules require +5V-SB in order to boot properly
oThe QCG002 SuperIO chipset requires +5V-SB to operate properly
Recommended Connect Tech Power Supplies
Xtreme/PSU –details here
oPN: PSG003 (PCI-104 Bus Connector Installed)
oPN: PSG006 (No Bus Connectors Installed)
Xtreme/PSU Isolated –details here
oPN: PXG109 (PCI-104 Bus Connector Installed)
oPN: PXG112 (No Bus Connectors Installed)
oPN: PXG309 (PCI-104 Bus Connector Installed –High Voltage Input)
oPN: PXG312 (No Bus Connectors Installed –High Voltage Input)