Connection Hive Monitor User manual
Hive Monitor Bracket
Assembly Instructions
connection.uk.com
Assembly Instructions
Hive Monitor Bracket to Workrail Assembly
21
3
5
4
1 The monitor bracket can be attached to any straight section of Hive
that has 2 tool plates inserted onto the workrail.
2 Offer the wall fixing plate up to
the work rail.
3 With the fixings provided, attach the wall plate to
the tool rail.
4 Ensure that the fixings are secured tightly,
and that any cables are passed through the
apertures in the plate.
5 The work rail end cap can then be reattached to the rail using the fixings provided with the Hive unit.
Assembly Instructions
Hive Monitor Bracket to Workrail Assembly
6 7
6 The monitor plate is then attached to the back of
the monitor using the fixings provided.
7The monitor, with the plate attached, is then offered up
to the wall plate that has been attached to the workrail.
8
8 The Plates are secured tightly using the fixings provided.
9 The top screen can then be reattached to the completed unit.
© Connection Seating Limited 2020. All rights reserved.
London Showroom
31 Great Sutton Street,
Clerkenwell,
London,
EC1V 0NA
Tel: 020 7253 9877
www.connection.uk.com
Head Office & Showroom
Dogley Mills,
Penistone Road,
Huddersfield,
West Yorkshire,
HD8 0LE
Tel: 01484 600 100
Manchester Showroom
The Old Law Library,
Kennedy Street,
Manchester,
M2 4BY
connection.uk.com
Table of contents
