Contec Combi 08a pulse User manual

User

UserManual

M anual

Manual

ElectronicSphygmomanometer

■Toassurethecorrectuseoftheproductsafetymeasures,pleasecarefullyreadusermanual

beforeusing.

■Afterreading,pleasevalidlykeepingtoreferandconsultatanymoment.

I

Contents

Chapter1 Safety Precautions: ....................................................................................................... 1

Chapter2 Main Unit ...................................................................................................................... 3

Chapter3 Button Functions ........................................................................................................... 4

Chapter4 External Interfaces ........................................................................................................ 4

Chapter5 Dry Battery/AC Adapter Installation ............................................................................ 5

5.1 Dry Battery Installation ..................................................................................................... 5

5.2 Using The AC Adapter ...................................................................................................... 5

Chapter6 Setting The Date And Time ........................................................................................... 6

Chapter7 Unit ............................................................................................................................... 7

Chapter8 User Switch ................................................................................................................... 7

Chapter9 Applying the Arm Cuff ................................................................................................. 7

Chapter10 BP Measurement ......................................................................................................... 8

10.1 Accurate Measurement Way ............................................................................................ 8

10.2 BP Measurement .............................................................................................................. 9

Chapter11 Memory Function ...................................................................................................... 10

11.1 Review The Memory Value ........................................................................................... 10

11.2 Delete Memory Values ................................................................................................... 11

Chapter12 Alarm Function ......................................................................................................... 11

Chapter13 SpO2 Measurement Function(Separate Sale) ........................................................... 12

Chapter14 Monitoring Procedure ............................................................................................... 13

Chapter15 Maintenance and Cleaning ........................................................................................ 14

Chapter16 Installation Of The Software ..................................................................................... 15

16.1 Demand Of Editor ......................................................................................................... 15

16.2 Installation Of Software ................................................................................................ 15

Chapter17 Keys And Symbols .................................................................................................... 16

Chapter18 Error Message ........................................................................................................... 16

Chapter19 TROUBLESHOOTING ............................................................................................ 18

Chapter20 Clean And Maintenance ............................................................................................ 19

Chapter21 NIBP Specification ................................................................................................... 21

Chapter22 SpO2 Specification ................................................................................................... 23

1

C

C hapter1

hapter1

hapter1 Safety

Safety

Safety Precautions:

Precautions:



Before use, carefully read "Safety Precautions" for a correct use.



To prevent users suffered hurt or damnification due to improper use, see "Safety

Precautions", and use this product properly.

For safety reasons, be sure to comply with safety precautions.

Note

If not to use correctly, it exists that a potentially hazardous situation which may result in injury to

the user or patient or damage to the equipment or other property .

Note

Self-diagnosis and treatment using measured results may be dangerous.

Follow the instructions of your physician.

Contact your physician for specific information about your blood pressure.

Please hand measurement results to the doctor who know your health to accept diagnosis.

For severe blood circulation disorder or arrhythmia patients, please use the device under the

guidance of a doctor.

Otherwise it may lead to acute hemorrhage, or measurement error as a result of squeezed arm.

This device is intended for using in measuring blood pressure and pulse rate.

Do not use for any other purpose.

Otherwise it may cause accident or holdback.

Please use special cuff.

Otherwise it is possible that measurement result is incorrect.

Do not disassemble or attempt to repair the unit or components without permission.

Otherwise it can not measure correctly.

Operation for AC Adapter (Separate Sale)

Note

Please use sold separately dedicated AC adapter.

Otherwise it may cause trouble.

Sold separately dedicated AC adapter be sure to use a separate socket.

Otherwise it may cause electric shock or injury.

When there is breakage of sold separately dedicated AC adapter plug or wire ,

please immediately pulled the plug from the socket.

Otherwise it may cause electric shock or injury.

Do not plug or unplug the adapter power cord with wet hands.

Otherwise it may cause electric shock or injury.

2

Operation for battery

Note

Please use 4 "AA" size manganese or alkaline batteries, do not use batteries of other types.

Otherwise it may cause fire.

New and old batteries, different kinds batteries can not be confusion.

Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic

Sphygmomanometer .

+ and - polarities of the batteries must match the polarities of the battery compartment as

indicated. When the batteries power exhausts , replace with four new batteries at the same time.

Please take out the batteries when you do no t use the device for a long time .

Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic

Sphygmomanometer .

If battery fluid should get in your eyes, immediately rinse with plenty of clean water.

Contact a physician immediately.

Otherwise it will cause blindness or other hazards.

If electrolyte of the batteries immodestly glues on the skin or the clothes,

immediately rinse with plenty of clean water.

Otherwise it may hurt the skin.

Advice

Do not subject the device to strong shocks, such as dropping the unit on the floor.

Do not inflate before the cuff wrapps around the arm

Do not inflect the cuff and the air tube forcibly

This device is intended for using in measuring blood pressure and pulse rate in the adult ,

pediatric and neonatal population.

Warning

Please

Please use

use

use the

the

the device

device

device on

on

on the

the

the adult

adult

adult object

object

object who

who

who can

can

can read

read

read the

the

the user

user

user manual

manual

manual and

and

and the

the

the error

error

message

message shown

shown

shown on

on

on the

the

the screen.

screen.

screen. Read

Read

Read the

the

the user

user

user manual

manual

manual before

before

before use

use

use the

the

the device

device

device in

in

in order

order

order to

to

to take

take

actions

actions according

according

according to

to

to the

the

the manual

manual

manual when

when

when something

something

something wrong

wrong

wrong with

with

with the

the

the device.

device.

device. For

For

For pediatric

pediatric

pediatric and

and

neonatal

neonatal population

population

population ,

,

, measurement

measurement

measurement should

should

should be

be

be only

only

only performed

performed

performed by

by

by qualified

qualified

qualified personnel.

personnel.

personnel. And

And

please

please make

make

make sure

sure

sure to

to

to select

select

select the

the

the right

right

right user

user

user mode

mode

mode and

and

and cuff

cuff

cuff before

before

before use

use

use .

.

3

Chapter2

Chapter2 Main

Main

Main Unit

Unit

The production is in the package. Open the package and confirm whether the production is

whole.

Accessories

Accessories ：

Adult

Adult Cuff

Cuff

Cuff Dry

Dry

Dry Battery

Battery

(Specification: limb circumference 22-32cm (middle part of upper arm), please choose suited

cuff when measuring pediatric or other).

USB Data Line Software CD User Manual

Separate Sale :

AC Adapter

InputAC 100-240V 50 - 60Hz AC 500 mA

Output DC 6.0V 1.0A

S p O

2

Probe Y10UCH150

S p O

2

Measurement Range 35%~100 %

Measurement Accuracy 70%~100% ± 2%

Pulse Measurement Range 30~250bpm

UP/DOWN Button

MEMORY Button

AC Adapter Jack

MENU Button

USB Plug Jack

Cuff Plug

Cuff Air Plug

USER SWITCH Button

ON/OFF Button

START/STOP Button

Display

4

Chapter3

Chapter3 Button

Button

Button Functions

Functions

All the operations to the Electronic Sphygmomanometer are through the buttons. The names of

the buttons are above them. They are:

【ON/OFF

ON/OFF

ON/OFF 】Hold the button to start or close the device.

【START/STOP

START/STOP

START/STOP 】Press to inflate the cuff and start a blood pressure measurement.

When measuring, press to cancel the measurement and deflate the cuff.

The three buttons correspond with the hint in the LCD screen downside,

pressing any button will carry on corresponding function, eg: 【MENU 】【 ENTER 】【 LIST 】etc.

Up and down buttons respectively carry on the functions of moving the cursor up and

down, changing the parameters and switching the status.

Chapter4

Chapter4 External

External

External Interfaces

Interfaces

Note

Please

Please hold

hold

hold the

the

the air

air

air plug

plug

plug to

to

to remove

remove

remove the

the

the NIBP

NIBP

NIBP cuff.

cuff.

①Cuff Socket

left side

The right side of the instrument is USB socket and AC adapter socket.

①USB socket

②AC adapter socket

right side

5

Chapter5

Chapter5 Dry

Dry

Dry Battery/AC

Battery/AC

Battery/AC Adapter

Adapter

Adapter Installation

Installation

The production can use dry battery or AC adapter as power source.







5.1

5.1 Dry

Dry

Dry Battery

Battery

Battery Installation

Installation

1Press the ▲ indicator on the battery cover and slide the cover off in the direction of the

arrow.

2Install 4 "AA" size dry batteries so the +(positive) and 一(negative) polarities match the

polarities of the battery compartment as indicated.

3Replace the battery cover.

Icon “ ” : the batteries power will exhaust.

Replace with four new batteries (the same sort) at the same time.

Turn the unit off before replacing the batteries.

Note

Dispose

Dispose of

of

of the

the

the batteries

batteries

batteries according

according

according to

to

to applicable

applicable

applicable local

local

local regulations

regulations

regulations about

about

about environmental.

environmental.

5.2

5.2 Using

Using

Using The

The

The AC

AC

AC Adapter

Adapter

1Connect device and the AC Adapter. Insert the AC Adapter Plug into the AC Adapter Jack

on the right side of the device.

2Plug the AC Adapter into a AC outlet.

Note

①Hold

Hold

Hold and

and

and pull

pull

pull the

the

the Housing

Housing

Housing to

to

to remove

remove

remove the

the

the AC

AC

AC Adapter

Adapter

Adapter from

from

from the

the

the electrical

electrical

electrical outlet.

outlet.

outlet. Do

Do

Do not

not

remove

remove by

by

by pulling

pulling

pulling on

on

on the

the

the cord.

cord.

②Remove

Remove

Remove the

the

the AC

AC

AC Adapter

Adapter

Adapter plug

plug

plug from

from

from the

the

the unit.

unit.

Please

Please be

be

be sure

sure

sure to

to

to use

use

use dedicated

dedicated

dedicated AC

AC

AC adapter.

adapter.

Note

You'd

You'd better

better

better take

take

take off

off

off batteries

batteries

batteries when

when

when use

use

use the

the

the AC

AC

AC adapter

adapter

adapter as

as

as power

power

power source.

source.

source. If

If

If there

there

there is

is

is any

any

damage

damage to

to

to the

the

the AC

AC

AC adapter,

adapter,

adapter, you

you

you should

should

should use

use

use batteries

batteries

batteries to

to

to run

run

run the

the

the device.

device.

6

When

When adapter

adapter

adapter and

and

and batteries

batteries

batteries are

are

are both

both

both used

used

used at

at

at the

the

the same

same

same time,

time,

time, the

the

the battery

battery

battery power

power

power will

will

will not

not

not be

be

consumed.

consumed. Switch

Switch

Switch adapter

adapter

adapter and

and

and battery

battery

battery as

as

as power

power

power supply

supply

supply when

when

when the

the

the device

device

device is

is

is off,

off,

off, otherwise,

otherwise,

the

the device

device

device may

may

may shutdown

shutdown

shutdown due

due

due to

to

to power

power

power failure.

failure.

Chapter6

Chapter6 Setting

Setting

Setting The

The

The Date

Date

Date And

And

And Time

Time



It is necessary to set date and time after turning on the device.



The Electronic Sphygmomanometer automatically stores measurement results with date and

time.



If dry battery power exhausts or removed, then, after the device turned on, the date resumes

from the last setting value and the time from 00:00:00, set the date and time again.

The Electronic Sphygmomanometer stores the measure results of three users automatically, and

up to 100 items for every user. The results can be uploaded to PC via USB and processed with

the PC software. If the date and time are set correctly, the date and time when measuring will be

correct in the memory, otherwise it may not be correct.

Note

Correctly

Correctly use

use

use data

data

data upload

upload

upload function:

function:

1. Turn on the device to enter the main interface shown as the follow:

2. Press 【MENU 】button to enter 【SYSTEM MENU 】and select 【SYSTEM TIME 】item

in system menu. The current time will be displayed:

3.Press 【UP 】or 【DOWN 】buttons to set date and time.

4. After setting, select 【CONFIRM 】item and press 【ENTER 】button to confirm the setting

value. If you do not want to change the time, select 【EXIT 】item and press 【ENTER 】button

to return the previous menu.

Note

Please

Please choose

choose

choose the

the

the computer

computer

computer which

which

which should

should

should be

be

be ensured

ensured

ensured compliance

compliance

compliance with

with

with the

the

the requirements

requirements

requirements of

of

IEC60950,

IEC60950, or

or

or else

else

else it

it

it may

may

may damage

damage

damage the

the

the device.

device.

7

Chapter7

Chapter7 Unit

Unit

There are two units: "mmHg" and "kPa".

The default is: "mmHg".

To switch "mmHg" and "kPa" units, enter the 【SYSTEM SETUP 】submenu in 【SYSTEM

MENU 】, and complete switching in 【UNIT 】item.

Chapter8

Chapter8 User

User

User Switch

Switch

The Electronic Sphygmomanometer stores the measure results of three users automatically, and

up to 100 items for every user.

Press 【USER 】button in main interface to switch users. Or press 【USER PURVIEW 】item

in 【SYSTEM SETUP 】menu to switch users.

Note

When

When the

the

the 【USER

USER

USER PURVIEW

PURVIEW

PURVIEW 】is

is

is set

set

set to

to

to be

be

be 【ALL

ALL

ALL 】,

,

, current

current

current user

user

user can

can

can be

be

be switched

switched

switched under

under

main

main interface;

interface;

interface; when

when

when set

set

set to

to

to a

a

a certain

certain

certain user,

user,

user, it

it

it will

will

will not

not

not be

be

be able

able

able to

to

to switch.

switch.

Chapter9

Chapter9 A

A

A pplying

pplying

pplying the

the

the A

A

A rm

rm

rm C

C

C uff

uff

The measurement can be carried out by applying the cuff on left or right arm.

Remove tight-fitting clothing from your upper arms.

Carry out the operation in a room with comfortable temperature.

When measuring, take the thick clothes off instead of rolling up the sleeves.

In order to measure accurately, pay attention to applying the cuff properly (left arm).

8

1Make sure the air plug is securely inserted in the main unit.

2Stretch cuff into a barrel for the arm can conformable enter into the barrel.

3Arm penetrate throught the cuff, the air tube of the cuff will pass the top of your palm.

4Apply the cuff to your upper arm. The color marker is on the inside center of your arm and

make the air tube aligned with your middle forger.

5The bottom of the cuff should be approximately 2cm~3cm above your elbow.

6Be fixed with cloths, and wrapped tight cuff, the arm and the cuff should not have gaps.

Chapter10

Chapter10 BP

BP

BP Measurement

Measurement

10.1

10.1 Accurate

Accurate

Accurate Measurement

Measurement

Measurement Way

Way

Measurement in quiet and relaxing state.

1.Place your arm on a table.

2.The cuff is level with your heart.

3.The palm of the hand is up, and the body relax.

9

Try

Try to

to

to measure

measure

measure your

your

your blood

blood

blood pressure

pressure

pressure at

at

at the

the

the same

same

same time

time

time each

each

each day

day

day with

with

with the

the

the same

same

same arm

arm

and

and the

the

the same

same

same pose

pose

pose for

for

for consistency.

consistency.

The high and low location of cuff will cause changes in measurement results.

Do not touch Electronic Sphygmomanometer , cuff and windpipe during

measurement.

Measurements

Measurements should

should

should be

be

be taken

taken

taken in

in

in a

a

a quiet

quiet

quiet place

place

place and

and

and the

the

the body

body

body relax.

relax.

Remain still 4~5 minutes before measurement.

Relax the body, do not let the muscle activity.

Do not talk and movement during the measurement.

Wait 4~5 minutes between measurements .

Do not use a cellular phone near the device .

10.2

10.2 BP

BP

BP Measurement

Measurement

Press 【START/STOP 】button to take a measurement.

Start measurement measurement result

During measurement, please keep correct pose and quiet state, do not move.

Stop

Stop Measurement

Measurement

D uring measurement, if you wish to stop measuring, p ress 【START/STOP 】button to stop and

deflate .

Confirm Measurement Value

Measurement value can be automatically stored.([using memory function] refer to 10 page)

* Self-diagnosis and treatment using measured results may be dangerous. Follow the instructions

of your physician.

Note



Wait

Wait 4-5

4-5

4-5 minutes

minutes

minutes between

between

between measurements.

measurements.

When repeated measurements, because, the arm appears congestion, it may not get correct blood

pressure measurement. After the blood flow, take a measurement once again.



When some factors affect the measurement results in measurement process, error messages

hints will appear on the screen, you can obviate the malfunction and re start a measurement.

In no physiological alarm state, press any button to carry on the corresponding button function;

10

in audio alarm state, press any button (excep t 【ON/OFF 】button ) to clear up the audio alarm.

④Take off the cuff, hold 【ON/OFF 】button to turn the device off.

*The device will automatically turn off after two minutes in which there is no operation to the

device , even if you forget to turn the power off.

Chapter11

Chapter11 Memory

Memory

Memory Function

Function

The device r is designed to store and display the blood pressure, pulse rate values and the dat e and

time when measure d , which are up to 100 items . I f there have been 100 items store d, when the

101 measurement have been taken, the earliest results are deleted.

11.1

11.1 Review

Review

Review The

The

The Memory

Memory

Memory Value

Value

1.In the main interface (interface when boot-strap), press 【MEMORY 】button to review the

most recent measurement values in large-print with the serial number from 1 to 100.

2. Press 【UP 】/【DOWN 】button to circularly switch the former measurement values.

*The right figure shows that there is no Measurement result.

3.Press 【LIST 】button to switch to data table interface.

4.Press 【TREND 】button to display trend interface.

11

5. Finish display ing the measurement values

Press 【EXIT 】to return the main interface or hold 【ON/OFF 】button to turn the power off.

* The device will automatically turn off after two minutes in which there is no operation to the

device , even if you forget to turn the power off.

11.2

11.2 Delete

Delete

Delete Memory

Memory

Memory Values

Values

User s can delete a ll values stored in the memory of each user separately instead of deleting a

special item .

1.Press 【MENU 】button to enter 【SYSTEM MENU 】, select 【DELETE

DATA

】item and

enter its interface , in which select the user whose data will be deleted . A ll measurement results of

selected user will be deleted after confirm

2.Finish Operation

Select 【CONFIRM 】or 【EXIT 】to return the previous menu, or hold 【ON/OFF 】button

to turn the power off.

* The device will automatically turn off after two minutes in which there is no operation to the

device , even if you forget to turn the power off.

Chapter12

Chapter12 Alarm

Alarm

Alarm Function

Function

Alarms are classified into two categories : technical alarm and physiological alarm.

P

P hysiological

hysiological

hysiological A

A

A larm

larm

User can press 【MENU 】button to enter system menu, select 【ALARM SETUP 】item to enter

its interface, and then set alarm on-off and the high and low alarm limits, when blood pressure is

higher than the high limit or lower than the low limit, the physiological alarm will occur.

12

Press any button to cancel the alarm in physiological alarm state and this method brings no

affection to the next alarm .

T

o c lose alarm in 【ALARM SETUP 】will disable the alarm

function until switch alarm on .

T

echnical

echnical A

A

A larm

larm

When power is about to exhaust and alarm is o n , the n the alarm will occur . Th is alarm can not

be cancelled unless being close d or the power replace d .

Chapter13

Chapter13 SpO

SpO

2

Measurement

Measurement Function(

Function(

Function( Separate

Separate

Separate Sale

Sale

Sale )

)

Please

Please pay

pay

pay attention

attention

attention to:

to:

Warning

◎Pulse

Pulse

Pulse oximeter

oximeter

oximeter can

can

can overestimate

overestimate

overestimate the

the

the S

S

S p

p

p O

O

2

value

value in

in

in the

the

the presence

presence

presence of

of

of Hb-CO,

Hb-CO,

Met-Hb

Met-Hb or

or

or dye

dye

dye dilution

dilution

dilution chemicals.

chemicals.

◎ES (Electrosurgery) equipment wire and S p O

2

cable must not be tangled up.

◎Do not put the sensor on extremities with arterial catheter or venous syringe.

◎Do not perform S p O

2

measuring and NIBP measuring on the s ame arm at one time,

because obstruction of blood flow during NIBP measuring may adversely affect the

reading of S p O

2

value.

Note

◎Make sure the nail covers the light window.

◎the wire s hould be on the backside of the hand.

◎S p O

2

value is always displayed in the fixed place.

13

Warning

◎Check

Check

Check if

if

if the

the

the sensor

sensor

sensor cable

cable

cable is

is

is in

in

in normal

normal

normal condition

condition

condition before

before

before monitoring.

monitoring.

monitoring. After

After

After unplugging

unplugging

unplugging the

the

S

S p

p

p O

O

2

probe

probe cable

cable

cable from

from

from the

the

the socket,

socket,

socket, the

the

the interface

interface

interface will

will

will return.

return.

◎Do

Do

Do not

not

not use

use

use the

the

the S

S

S p

p

p O

O

2

probe

probe once

once

once the

the

the package

package

package or

or

or the

the

the sensor

sensor

sensor is

is

is found

found

found damaged.

damaged.

damaged. Instead,

Instead,

you

you shall

shall

shall return

return

return it

it

it to

to

to the

the

the vendor.

vendor.

◎Prolonged and continuous monitoring may increase jeopardy of unexpected change of dermal

condition such as abnormal sensitivity, erubescence, vesicle, repressive putrescence, Particularly

in newborns or in a Perfusion disorders and changes or immature skin form of the patient.

According to skin quality change, correct optical path alignment and attachment methods to

regularly check the place of S p O

2

probe, and change the attachment position when the quality of

skin decline. More frequent examinations may be required for different patients.

Chapter14

Chapter14 Monitoring

Monitoring

Monitoring Procedure

Procedure

1. Attach the sensor to the appropriate site of the patient finger as following figure.

place S p O

2

2. Plug the connector of the S p O

2

probe cable into the USB socket in the lower right of the device.

The main interface will switch to S p O

2

interface. The update period of data is less than 5 seconds,

which is changeable according to different individual pulse rate. This operation brings no

affection to other functions.

Warning

U

U ncomfortable

ncomfortable

ncomfortable or

or

or painful

painful

painful feeling

feeling

feeling may

may

may appear

appear

appear if

if

if using

using

using the

the

the device

device

device ceaselessly,

ceaselessly,

ceaselessly, especially

especially

especially ,

,

, for

for

the

the m

m

m icrocirculat

icrocirculat

icrocirculat ion

ion

ion barrier

barrier

barrier patients.

patients.

patients. It

It

It is

is

is recommended

recommended

recommended that

that

that the

the

the sensor

sensor

sensor should

should

should not

not

not be

be

applied

applied to

to

to the

the

the same

same

same finger

finger

finger for

for

for over

over

over 2

2

2 hours.

hours.

Measurement

Measurement Limitations

Limitations

During

During operation,

operation,

operation, the

the

the accuracy

accuracy

accuracy of

of

of oximeter

oximeter

oximeter readings

readings

readings can

can

can be

be

be affected

affected

affected by:

by:

High-frequency electrical noise, including noise created by the host system, or noise from

external sources, such as electrosurgical apparatus connected to the system.

Intravascular dye injections.

Excessive patient movement.

14

External light radiation.

Improper sensor installation or incorrect contact position of the patient.

S p O

2

probe temperature (optimal temperature between 28 ° C and 40 ° C).

Placement of the S p O

2

probe on an extremity that has a blood pressure cuff, arterial catheter,

or intravascular line.

Significant concentrations of dysfunctional hemoglobin, such as carboxyhemoglobin and

methemoglobin.

S p O

2

too low.

Bad circular injection of the part being measured.

It is required to use S p O

2

probe which is provided by our company, contact with our sale

department when changes S p O

2

probe.

Chapter15

Chapter15 Maintenance

Maintenance

Maintenance and

and

and Cleaning

Cleaning

Warning

Take

Take cuff

cuff

cuff and

and

and the

the

the power

power

power source

source

source off

off

off before

before

before cleaning

cleaning

cleaning the

the

the unit

unit

unit or

or

or the

the

the S

S

S p

p

p O

O

2

probe.

Caution



Do not subject the sensor to autoclaving.



Do not immerse the S p O

2

probe into any liquid.



Do not use any S p O

2

probe or cable that may be damaged or deteriorated.

Cleaning:



Use a cotton ball or a soft mull moistened with hospital-grade ethanol to wipe the surface of

the S p O

2

probe , and then dry it with a cloth. This cleaning method can also be applied to the

luminotron and receiving unit.



The cable can be cleaned with 3% hydrogen dioxide, 70% isopropanol, or other active

reagent. However, connector of the S p O

2

probe shall not be subjected to such solution.

15

Chapter16

Chapter16 Installation

Installation

Installation Of

Of

Of The

The

The Software

Software

16.1

16.1 Demand

Demand

Demand Of

Of

Of Editor

Editor

Pentium IV 1.8G or more

Operation System:Windows XP

EMS memory: 256 M or more

Hard Disk: 40G or more

Display: 17 inch or more

CD-ROM

USB: 2 or more

Resolution of printer: 600 DPI

16.2

16.2 Installation

Installation

Installation Of

Of

Of Software

Software

1.Place the CD-ROM in the CD-ROM compartment located on your computer.

2.If Auto Play for CDs is enabled, place CD in reader and follow instructions when they appear

in the screen; otherwise follow install instructions below:

1.Open Windows Explorer.

2.Click on the root CD-ROM directory.

3 .Follow the instructions in the screen.

Refer to "Software Help"for details about the operation method of the PC software.

16

Chapter17

Chapter17 Key

Key

Key s

s

s And

And

And Symbols

Symbols

Signal Description

Warning – See User Manual

SYS Systolic pressure

MAP MAP pressure

DIA Diastolic pressure

PR Pulse rate (bpm)

ADU Adult

PED Pediatric

NEO Neonatal

INFO Information

Open the alarm sound indication

Close the alarm sound indication

Low-power

Full-power

1.no NIBP data to review

2.no finger inserted to SpO

2

probe

3.An indicator of signal inadequacy

Class Ⅱequipment

WEEE (2002/96/EC)

BF Applied Part

SN

SN Serial number

USB or connect S p O

2

probe

Chapter18

Chapter18 Error

Error

Error Message

Message

Error message will be displayed in the screen if there is something wrong when measuring. The

causes and solutions are shown as follows:

Error Message Causes Solutions

17

Self-test failure

System failure

Function abnormal Please contact us

Loose cuff

Cuff is not connected

correctly.

Correctly connect cuff (refer to 8 page)

Air leakage Cuff plug fall off

Make sure the cuff plug is securely

inserted in the windpipe (refer to 8 page)

Air pressure error Air pressure error Refer to the troubleshooting

Weak signal

The pulse signal is too weak

or the cuff is loose.

Correctly connect cuff (refer to 8 page)

overpressure Cuff is blocked or squeezed Correctly connect cuff (refer to 8 page)

Excessive movement

Over range

Saturated signal

The signal extent is too big

owing to the arm or body

moving or other reasons when

measuring

Keep arm, body still, measure again

Time out It takes too much time

18

Chapter19

Chapter19 TROUBLESHOOTING

TROUBLESHOOTING

Abnormal

Phenomenons

Causes Solutions

BP measurement

values too high or

too low.

Cuff is not connected correctly.

Correctly connect cuff (refer to 8

page)

Talk or move arms when

measuring

Keep quiet and restart a measurement

The turnup clothing presses the

arm

Take off the clothing which presses

the arm, and restart a measurement

No pressure

Cuff leakage Buy a new cuff

The cuff windpipe is not

correctly connected with cuff

Correctly connect

Cuff is not inflated Stop using the device and contact us

Cuff deflates in

short time

Loose cuff Correctly apply cuff

It can not carry on measurement when press the

measurement button

Switch on the power once again and

restart a measurement

Power off suddenly

when inflating

No use for a long time, the

power of batteries can be

exhausted owing to the

changed temperature

Replace all four batteries with new

ones.

Hold the on/off

button but can not

start the device

Power of batteries can be

exhausted

Replace all four batteries with new

ones.

The battery polarities is

reversed

Check the battery installation for

proper placement of the battery

polarities.

Cuff inflation start before press the measurement

button or never stop inflating when measuring

P ull out the cuff to deflate. Stop using

the device and contact us.

Cuff never deflation

P ull out the cuff to deflate. Stop using

the device and contact us.

Air pressure error

No d eflation or d eflation error

or inflation without stop

P ull out the cuff to deflate. Stop using

the device and contact us.

Others Keep arm, body still, measure again.

No press value displayed or the value unchanged or

change erratically when cuff inflated

P ull out the cuff to deflate. Stop using

the device and contact us.

Other phenomenon

Switch on the power once again and

restart an operation.

Replace the batteries.

If no, please contact us.

Contec Combi 08A pulse User manual

Popular Blood Pressure Monitor manuals by other brands