Continental Electric CE27205 User manual

MODEL:
CE27205
INSTRUCTION MANUAL
6” CLIP FAN
ASSEMBLY
• Position the back grille against the motor.
• Use the screw x the main body.
• Unclose the transparent sticker on back of the fan blade, put the steel
washer/steel ring into the pole of back of fan blade.
• Position the front grille against the rear grille so that the holes in the rims
that accept the small nut and bolt are in line
NOTE: THERE IS A STEEL RING WHICH FIXES THE PRO FELLER
BLADES IN PLACE. DO NOT RELEASE IT.
SPECIAL NOTES
• Do not insert nger or any object into the grill.
• Do not unplug by pulling on the wire.
• Unplug the fan when not in use
• Do not place the fan near ame or other source of heat motor’s axis
propeller blade.
• Do not use near water prolect from rain
• Do not use gasoline or any volatile chemicais to clean the fan.

MODEL:
CE27205
INSTRUCTION MANUAL
6” CLIP FAN
ASSEMBLY
• Position the back grille against the motor.
• Use the screw x the main body.
• Unclose the transparent sticker on back of the fan blade, put the steel
washer/steel ring into the pole of back of fan blade.
• Position the front grille against the rear grille so that the holes in the rims
that accept the small nut and bolt are in line
NOTE: THERE IS A STEEL RING WHICH FIXES THE PRO FELLER
BLADES IN PLACE. DO NOT RELEASE IT.
SPECIAL NOTES
• Do not insert nger or any object into the grill.
• Do not unplug by pulling on the wire.
• Unplug the fan when not in use
• Do not place the fan near ame or other source of heat motor’s axis
propeller blade.
• Do not use near water prolect from rain
• Do not use gasoline or any volatile chemicais to clean the fan.

IMPORTANT SAFEGUARDS
WHEN USING ELECTRICAL APPLIANCESBASIC SAFETY PRECAU-
TIONS SHOULD ALWAYS BE FOLLOWED INCLUDING
THE FOLLOWING.
• Please read all instructions before using this product.
• Use fan only for intended use as described instruction manual.
• To protect against electrical shock do not place fan in window immerse
plug or coad in water or spray with liquid.
• Close supervision is necessary when any appliance is used by near
children
• Unplug from outlet when in use. When moving fan from one location to
another before putting on or taking off parts and before cleaning.
• Avoid contacting moving parts.
• Do not operate in the presence of explosive and ammable fumes.
• Do not place fan or any parts near an open ame. Cooking or other
heating appliance.
• Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions. Or has been dropped or damaged in any marner
return appliance to nearest authorized service facility for examination
repair or electrical or mechanical adjustment.
• The use of attachments not becomended or sold by the appliance
manufacturer may cause hazards.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter or touch hot surfaces.
• To disconnect grip plug and pull from wall outlet never yank on cord.
• Always use on a dry level surface.
• Do not operate without fan grills properly in place.
• This products intended for house hold use only and not for commercial
or industrial use.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.
DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED CONTROL
DEVICE.
READ AND SAVE THESE INSTRUCTIONS