manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Continental Instruments
  6. •
  7. Controllers
  8. •
  9. Continental Instruments CICP1800T User manual

Continental Instruments CICP1800T User manual

SUPERTERM-8
CICP1800T 8-Door Intelligent Controller
The eight-reader Turbo Superterm (CICP1800T)
supports 8 readers and has 24 inputs, 1 tamper alarm
and 17 outputs. A locking steel enclosure, power
supply and battery are included.
Turbo Superterm-8 is an expandable intelligent controller
capable of supporting all access control functions for one to
eight doors. This distributed processor-based panel will operate
as a standalone unit in the event server-communications are
interrupted. The Turbo Superterm is programmed via Continental
Instruments (CIC) CardAccess® software program, a Windows-
based access control and security management solution. Once
programmed, the controller does not require continuous server
communications, as it automatically stores system transactions
in its internal memory. The Turbo Superterm’s memory is
field expandable, allowing for greater cardholder populations
and/or a larger transaction buffer. The controller’s Flash
EPROM firmware is easily upgraded when additional features
or system enhancements are required. Continental’s controllers
feature extensive multi-stage lightning/transient protection
on-board for maximum reliability even in harsh environments.
The Turbo Superterm accepts industry standard Wiegand output
devices and supports virtually all card/reader technologies.
Proximity, Biometric, Magnetic Stripe, Barcode, Wiegand,
Barium Ferrite, Keypad and Smart Readers are easily connected
and controlled. The Turbo Superterm can store multiple card (bit)
formats in its internal memory, making it a cost-effective retrofit
panel. Supporting multiple bit formats allows existing card
populations and readers to remain in place.
Up to 63 CIC Intelligent Controllers (Microterm, Miniterm,
Smarterm or Turbo Superterm) can be intermixed on the same
communications network. Multiple communication networks
(ports) can be connected to the CardAccess® server for maximum
system expansion. Controller communication choices include:
hardwire (repeat or multi-drop mode), LAN/WAN, dial-up or
fiber optics for maximum flexibility. Continental Instruments
supports RS232, RS422 and RS485 communication formats for
optimal system configuration.
In addition to memory and power expansion capabilities, the
Turbo Superterm will accept up to 3 input/output expansion
boards. The Turbo Superterm can be ordered with the expansion
boards pre-installed at the factory. The boards can also be
ordered separately and field installed within the Turbo Superterm
enclosure. The boards are mounted to the inside of the hinged
enclosure cover. The Alarm Expander Board provides 16
supervised inputs while the Relay Expander Board provides 16
relay outputs and 8 unsupervised inputs.
Continental Instruments, A Napco Security Group Company • 355 Bayview Ave., Amityville, NY 11701
(631) 842-9400 • FAX (631) 842-9135 www.cicaccess.com GSA GS-07F-00039H
Turbo Superterm-8 Capacities
Cards 40,000 standard (exp. to 210,000)
Readers (5-wire) 8 (Wiegand output)
Keypads (5-wire) 8 (Wiegand output)
Keypads (7-wire) 8 X-Y Matrix type
Readers
w/Keypad
8 5-wire Readers with 8 or 4 X-Y Matrix Keypads
Standard
Inputs
24 (Supervised)
Expanded
Inputs
48 Additional inputs (Supervised)
Standard
Outputs
17 Form C rated at 3A@24VDC/VAC
Expanded
Outputs
48 Additional Form C rated at 3A@24VDC/VAC
Transaction
Buffer
1000 Standard (exp. to 250,000)
Time Schedules 128
Access Groups 1000
Holidays 50
Reader Power 800mA@5VDC, 500mA@12VDC
Battery Backup 4-6 hours included
Enclosure Size 21.5”H x 21.25”W x 7”D, 48lbs.
UL Listings Optional UL294, UL1076, CE
Superterm8.5x11x.indd 3/4/04, 2:32 PM1
TURBO SUPERTERM 8
A standard on-board power supply provides 800mA @5VDC
or 500mA @12VDC for reader power. An additional
3A@12VDC is available with the optional expanded power
supply. The Turbo Superterm can be ordered with a factory
installed expanded power supply. The expanded power supply
can also be ordered separately and field installed within the
Turbo Superterm enclosure. The expanded power supply
includes a 12AH standby battery, an upgrade to the standard
7AH battery. The standard 7AH and expanded 12AH batteries
provide 4–6 hours standby. In addition to the rechargeable
standby battery, each Turbo Superterm includes a lithium
battery for up to one year of data protection.
UL294 (Access Control System Unit), UL1076 (Proprietary
Burglar Alarm Unit) listings and CE are optional with the
Turbo Superterm-8.
Typical Door Configuration
See Continental Instruments Configuration Guide for
additional detailed system wiring information.
Continental Instruments, A Napco Security Group Company • 355 Bayview Ave., Amityville, NY 11701
(631) 842-9400 • FAX (631) 842-9135 www.cicaccess.com GSA GS-07F-00039H
CardAccess® and CI SQL 3000™ are trademarks of Continental/NAPCO. © Continental Instruments/NAPCO, 2003.
CICP1800T Eight-Door Intelligent Controller
Continental Instrument’s Controllers can connect to the
CardAccess Server via hardwire (shown below), LAN/WAN
dial-up modem or fiber optics. See the CIC Configuration Guide
for additional detailed system information.
Turbo Superterm-8 Components
QTY. Part No. Description
1CICP1800T
or
CICP1800TEXP
Eight (8) reader controller with stan-
dard 40,000 card capacity, 24
supervised alarm inputs, tamper
alarm, and 17 relay outputs. Unit ships
complete in a locked steel enclosure
including a 7AH standby battery for
memory and system operation.
Same as above, with expanded
power supply. Required if more
than one Relay Expander Board
(CICP1800TRB) is used or additional
12VDC is needed. A 12AH Battery is
included.
1Standard 14VAC Power Supply via step-
down transformer mounted inside
enclosure. 10’ power line cable with
110VAC plug is included.
1Standard 7AH Battery Backup included.
1 Optional CICEXPPWS 12V Linear Expanded Power
Supply provides 3A @ 12VDC
Auxiliary Power. 12AH Battery is
included.
2 Optional CICP1800MB2X2 Memory Board - 2MB per memory
board (up to 210,000 cards w/4 MB of
memory expansion).
Up to 3
Optional*
CICP1800RB Relay Expander Board - 16 output
relays, 8 alarm inputs (Unsupervised).
Up to 3
Optional*
CICP1800AB Alarm Expander Board - 16 alarm
inputs (Supervised). UL Listed.
Note: *A maximum of 3 Expansion Boards in any combination may be added to the Turbo Super-
term enclosure.
A480
Superterm8.5x11x.indd 3/4/04, 2:34 PM2

This manual suits for next models

1

Other Continental Instruments Controllers manuals

Continental Instruments CICP1200 User manual

Continental Instruments

Continental Instruments CICP1200 User manual

Continental Instruments CICP1100 User manual

Continental Instruments

Continental Instruments CICP1100 User manual

Continental Instruments CICP1400 User manual

Continental Instruments

Continental Instruments CICP1400 User manual

Continental Instruments CICP1400UL User manual

Continental Instruments

Continental Instruments CICP1400UL User manual

Continental Instruments CICP1300 User manual

Continental Instruments

Continental Instruments CICP1300 User manual

Continental Instruments CICP1800 User manual

Continental Instruments

Continental Instruments CICP1800 User manual

Popular Controllers manuals by other brands

SOMFY Smoove UNO io installation guide

SOMFY

SOMFY Smoove UNO io installation guide

TemperZone SAT-3 quick start guide

TemperZone

TemperZone SAT-3 quick start guide

KIOUR FA3F quick start guide

KIOUR

KIOUR FA3F quick start guide

H3C WX Configuration guide

H3C

H3C WX Configuration guide

Burkert 3005 quick start

Burkert

Burkert 3005 quick start

Parker Compax3S025V2 operating instructions

Parker

Parker Compax3S025V2 operating instructions

Deif SGC 420 user manual

Deif

Deif SGC 420 user manual

NSI Tork TPE24VA Installation, operation & service manual

NSI

NSI Tork TPE24VA Installation, operation & service manual

ROBBE RO-CONTROL PRO WIFI 200A OPTO user manual

ROBBE

ROBBE RO-CONTROL PRO WIFI 200A OPTO user manual

Woodward L-Series Installation and operation manual

Woodward

Woodward L-Series Installation and operation manual

Eaton Ampgard 720A Instructions for installation, operation and maintenance

Eaton

Eaton Ampgard 720A Instructions for installation, operation and maintenance

Whelen Engineering Company MPC02 operating guide

Whelen Engineering Company

Whelen Engineering Company MPC02 operating guide

Auber Instruments DSPR400 instruction manual

Auber Instruments

Auber Instruments DSPR400 instruction manual

safgard 1100 instructions

safgard

safgard 1100 instructions

ABB IRC5 Compact Applications manual

ABB

ABB IRC5 Compact Applications manual

Murphy PowerCore TEC-10 installation manual

Murphy

Murphy PowerCore TEC-10 installation manual

Omega Engineering HE-XT105 user guide

Omega Engineering

Omega Engineering HE-XT105 user guide

GESTRA NRR 2-52 Original Installation & Operating Manual

GESTRA

GESTRA NRR 2-52 Original Installation & Operating Manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.