Continental Instruments CICP1100 User manual

MICROTERM
CICP1100 Single Door Intelligent Controller
The Microterm (CICP1100) has 2 inputs, 1
tamper alarm and 3 outputs, and is housed
in a steel enclosure.
Microterm is a single-door intelligent controller designed to be
installed at or near the protected door. The Microterm is capable
of controlling all access control functions for one door, including
two-reader support. The two-reader configuration is generally
used for in-reader and out-reader applications. It is possible
to use the Microterm’s 2-reader configuration on two separate
doors with certain limitations. This distributed processor-based
panel will operate as a standalone unit in the event server
communications is interrupted. The Microterm is programmed
via CIC CardAccess® software program. Once programmed, the
controller does not require continuous server communications, as
it automatically stores system transactions in its internal memory.
The Microterm (CICP1100) has 2 inputs, 1 tamper alarm and 3
outputs, and is housed in a steel enclosure.
The Microterm accepts industry standard Wiegand output devices
and supports virtually all card/reader technologies. Proximity,
Biometric, Magnetic Stripe, Barcode, Wiegand, Barium Ferrite,
Keypad and Smart Readers are easily connected and controlled.
The Microterm can store multiple card (bit) formats in its internal
memory, making it a cost-effective retrofit panel. Supporting
multiple bit formats allows existing card populations and readers
to remain in place. An optional standby battery is available,
providing 4-6 hours standby power. The Microterm includes a
lithium battery for up to one year of data protection.
Up to 63 CIC Intelligent Controllers (Microterm, Miniterm,
Smarterm or Superterm) can be intermixed on the same
communications network. (A maximum of 31 Microterms
are permitted on each network.) Multiple communication
networks (ports) can be connected to the CardAccess®server for
maximum system expansion. Controller communication choices
include: hardwire (repeat or multi-drop mode), LAN/WAN,
dial-up or fiber optics for maximum flexibility. The Microterm
supports RS232 and RS422 communication formats for optimal
system configuration.
This Intelligent Controller is UL Listed for UL294 (Access
Control System Unit), UL1076 (Proprietary Burglar Alarm Unit)
and UL1950 (Information Technology Equipment).**
Continental Instruments, A Napco Security Group Company •355 Bayview Ave., Amityville, NY 11701
[phone] •FAX [phone] www.cicaccess.com GSA GS-07F-00039H
Microterm Capacities
Cards 1400 standard
Readers (5-wire) 1 or 2 (Wiegand output)
Keypads (5-wire) 1 or 2 (Wiegand output)
Keypads (7-wire) 1 X-Y Matrix type
Readers
w/Keypad
1 5-wire Reader with 1 X-Y Matrix Keypads
Standard
Inputs
2 (Supervised)
Expanded
Inputs
N/A
Standard
Outputs
3 Form C rated at 3A@24VDC/VAC
Expanded
Outputs
N/A
Transaction
Buffer
1000 Standard (exp. to 30,000)
Time Schedules 128
Access Groups 1000
Holidays 50
Reader Power 100mA@5VDC
Battery Backup
4-6 hours (optional)
Enclosure Size 7.5”H x 7.5”W x 2”D, 2lbs.
UL Listings UL294, UL1076, UL1950**
** UL1950 replaced with EN60950 in Q2/2003

Continental Instruments, A Napco Security Group Company •355 Bayview Ave., Amityville, NY 11701
[phone] •FAX [phone] www.cicaccess.com GSA GS-07F-00039H
CardAccess® and CI SQL 3000™ are trademarks of Continental/NAPCO. © Continental Instruments/NAPCO, 2003.
Door Contact
Electric
Door Strike
Door Lock
Power Supply
RS422 to Panels
Continental
Instruments llc
Re
q
uest to Exi
t
M
o
ti
o
n D
e
t
ec
t
o
r
Door Contact
C
ard Reader
Request
to Exit
B
u
Doo
r
Lock
A or B
G
D
G
G
G
Request
to Exit
G
H
G
NOTE: Request to Exit motion detectors will require
an additional 12VDC power cable. Exit devices are
typically mounted on the egress side of door.
C
ardAccess
3000
D
a
t
abase
a
n
d
C
ommunication
s
S
erve
r
C
I
C
E1
9
4
0
PL-
1
Pollin
g
Line Converte
r
R
S
2
3
2 to R
S
42
2
Required if server is not located
within 5
0
RS422 Re
p
eat Mode Communications Networ
k
4
000
' max. distance between controllers.
U
p
to 63 controllers on a Re
p
eat Mode Network
.
p
erter
m
Su
p
p
p
erter
m
Su
p
p
RS
42
2
x
. 4
000'
R
S
42
2
Max. 4
000'
R
S
42
2
Max. 4
000'
R
S
42
2
Max. 4
000'
R
S
42
2
Max. 4000'
R
S
2
32
Max.
50'
nit
e
r
m
M
i
i
m
arter
m
Sm
m
C
CICP1100 Single Door Intelligent Controller
Continental Instrument’s Controllers can connect to the
CardAccess Server via hardwire (shown below), LAN/WAN
dial-up modem or fiber optics. See the CIC Configuration
Guide for additional detailed system information.
Microterm Components
QTY. Part No. Description
1CICP1100
Stand-alone single- or two-door controller
with standard 1,400 card capacity, 2 alarm
inputs, tamper alarm, 3 relay outputs and
printer output. Unit ships complete in a steel
enclosure.
1Standard
12VDC Wallmount Power Supply included.
1Standard
15-conductor wiring Harness included.
1 Optional CICP1100BAT-2
CICP1100BAT-2 Battery Standby - Input
120VAC, Output 12VDC to temporary power
the Microterm only in the event of a power
failure.
Typical Door Configuration
See Continental Instruments Configuration Guide for
additional detailed system wiring information.
A431A