Contixo IntelliPup R4 User manual

PLEASE READ THIS MANUAL BEFORE USING.
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
IntelliPup R4
User Manual
*product colors may vary

2
How to use Voice Control
1. Press the Voice command button
2. Aim the remote at IntelliPup’s head and
speak into the microphone on the remote
control (COMMANDS ON PAGE 5)
3. Keep the remote in a direct line of sight
with Intellipup until indicator light stops
flashing. Once flashing stops, Intellipup will
complete the action
Voice Command
Button
Maintain direct line of sight between
remote transmitter light and Intellipup.
Speak toward the
microphone from no more
than 12 inches away.
(direct line of sight)
10-16 Feet (3-5 Meters)
<12in (30cm)

3
Battery Installation
IntelliPup Battery Installation
1.
2.
3.
*When removing the battery to charge, take care to unclasp the connector before pulling it off.
Remote Battery Installation
1.
2.
3.
1.
2.
3.
Contixo
IntelliPup R4
Remote for
IntelliPup R4
Rechargeable
Battery
USB Charging
Cable
Use a small phillips head screwdriver to remove the battery cover.
Replace the battery cover and screw back into place.

4
Remote Control
Signal Transmitter
Signal Indicator Light
Voice
Command
Microphone

5
Turn On/Off: Slide the power Switch on the IntelliPup R4
Standby: Occurs after 30 seconds without operation. IntelliPup R4 will turn
off after 90seconds without operation
Directional:
Press and hold the Forward, Backward, Turn Left, and Turn Right buttons.
Voice Commands:
Before speaking a command into the microphone, press the Voice Command
Button.
“Sit down”
IntelliPup will sit.
“Push-ups”
“Yoga”
“Act Cute”
IntelliPup will act cute
“Somersault”
“Angry Dog”
“Hello Rady”
“Sing a song”
IntelliPupwill play music
“Stand up”
IntelliPupwill stand up

6
How to Play with IntelliPup R4 continued
Other Actions
Imitate
Tease the Dog
Guard
Dance
IntelliPup will play music and dance.
IntelliPup will act cute when touching the top of the head.
Programming
Create your own set of actions! To Use the programming feature:
1.
2.
3.
Stop
Touch mode

Common Problem Solution
Nothing happens
when IntelliPup is turned
on low
The remote control
doesn’t work
IntelliPup doesn’t work
with remote
7
1.
2.
3.
immediately.
Low Power Indications
3060-80
Recommend using a 5V 1A charger (Not included) for charging.
1.
2.
3.
5.
6.
7.
8.
light turns on charging
cable. cable

CONTACT INFORMATION
E-Mail: support@con�xo.com
Website: www.con�xo.com
©2021 Con�xo Inc. All rights reserved. Con�xo®, the Con�xo logo and
associated characters, trademarks and design elements are owned and
licensed by Con�xo Company.