Convaid 996211 User manual

If you have any questions about attaching the Calf Panel,
please call our Sales Department at 888 CONVAID (266-8243) or [phone].
FOOTPLATE
996211
QTYDESCRIPTIONPART NUMBERITEM
1
Footrest Assy: Adult RHS
5009761
1
Footplate Adjustment Tube RH
5009702
1Footrest Extens. Housing Assy5006903
1Tube Connector 7/8" Heavy Duty100017
4
2Screw 1/4"-20 x 1-1/2" Flat Skt100262
5
1Detent Pin With Webbing Assembly5038796
1Thread Locker-Medium-Vibra-tite100690
7
Cruiser 16 Adult Footplate Assembly Kit RH
Assembled
Exploded
4
3
5 7
6
1
2
996211
QTYDESCRIPTIONPART NUMBERITEM
1
Footrest Assy: Adult RHS
5009761
1
Footplate Adjustment Tube RH
5009702
1Footrest Extens. Housing Assy5006903
1Tube Connector 7/8" Heavy Duty100017
4
2Screw 1/4"-20 x 1-1/2" Flat Skt100262
5
1Detent Pin With Webbing Assembly5038796
1Thread Locker-Medium-Vibra-tite100690
7
Cruiser 16 Adult Footplate Assembly Kit RH
Assembled
Exploded
4
3
5 7
6
1
2
Assembled
Standard Footplate Assy Kit - Right
Item Description Qty
1 Footrest Assembly: Adult, RHS 1
2 Footplate Adjustment Tube, RH 1
3 Footrest Extension Housing Assembly 1
4 Tube Connector 7/8" Heavy Duty 1
5 Screw 1/4"-20 x 1-1/2" Flat Skt 2
6 Detent Pin With Webbing Assembly 1
7 Thread Locker-Medium-Vibra-tite 1
996211
#
Kit Includes

If you have any questions about attaching the One Piece Handle,
please call our Sales Department at 888 CONVAID (266-8243) or [phone].
INSTRUCTIONS
Standard Footplate Assy Kit - Right
1. Pull out metal pin and remove the existing footplate extension tube Item 2 .
2. Using a 5/32" allen wrench, remove both bolts from the housing bracket on the
frame and remove existing footplate assembly components.
3. If needed, install tube connector Item 4 into the front leg by hammering or
pressing it into the front leg tube.
4. Slide the loop portion of the detent pin with webbing assembly over the front
x-brace tube.
5. Align footrest extension housing Item 3 with the front leg.
6. Apply some thread locker Item 7 on the thread portion of the screws Item 5 .
7. Using a 5/32" allen wrench, attach the footrest extension housing onto the front
leg using the screws provided Item 5 .
8. Reattach the footplate adjustment tube and secure it with the
detent pin Item 6 .