Cooler Master RR-AM4B-H212-S1 User manual

1
AMD AM4 Upgrade Kit
We are ready for your AM4 socket.
First Edition, March 2017
RR-AM4B-H212-S1

2
․MasterAir Pro 4
․MasterAir Pro 3
․Hyper 412 Series
․Hyper 212 EVO
․Hyper 212 X

For other models, additional upgrade kits will be available.
Photo in the instruction is for reference only, but installation steps remain the same. Reference model: MasterAir Pro 4
Before installing the CPU cooler onto your motherboard, we recommend separating the cooler fan from the heatsink for
easier installation.
Before you start
This is an AMD AM4 upgrade kit (RR-AM4B-H212-S1) for the new AMD Ryzen processors
and is compatible with select cooling products.
The models are listed below:

3
Step 1
Remove the screws and the retention module on the motherboard.

Do not remove the plate on the bottom of motherboard.
AMD AM4 upgrade kit fits with any orientation.
Step 2
Secure standoffs to the CPU zone on the
motherboard.

4
Step 3
Place the bracket between the copper base and heatsink, then unfold the bracket to
the “I” configuration for AMD bracket.

Note the locator point from copper base.

Step 4
Install the cooler onto standoffs.
Step 5
Apply the cooler fan back onto the cooler.

Ensure you plug the fan cable into the motherboard.

Make sure you peel off copper base protection label before you
install the cooler.
Apply thermal grease to the CPU.

5
Finish

6
Thank you for reading.
If you have any other questions,
Please contact your local retailer or tech support.
© Cooler Master Technology Inc.