Coolmax HD-381BK-U2 User manual

HD-381-U2 MANUAL
I. Features
•USB 2.0 Interface, support high speed data transfer rates up to 480 Mbps
•Backward compatible with USB 1.1 specifications
•Hot swappable and true Plug-n-Play
•Fully compatible with 3.5” SATA I and SATA II hard disk
•Suitable for Desktop, Notebook
•Insulating designed PCB
•Aluminum case
•One touch file backup
II. Specification
•HDD: SATA I / SATA II
•Interface type: USB 2.0 (Backward to USB 1.1)
•Material Case: Aluminum
•Powered by a DC 12V/DC 5V 2.0A Adaptor
•Power LED/HDD LED
III. Hard Drive Installation Tutorial
Part I: Install Hard Disk (SATA HDD) - Can not support IDE HDD
1. Un-load 2 screws at the back panel and take off the back panel
2. Slide off the front panel set(front panel, metal frame, PCB board),
3. Un-load the main frame with PCB from the metal frame and slowly detach one
side of the black plate
4. Slide-in and affix the HDD on the metal frame with 2 HDD screws
5. Insert the front panel set to the aluminum case and reload the back panel
with screws
IV. Instructions
Note: Please use direct USB connection at the rear of your PC/Notebook
The 3.5" HDD Enclosure connects to the host computer through a USB,
which is made with a USB cable having a Type A connector for connection to a USB
port on the host computer, and a type B connector for connection to the type B port
on the 3.5" HDD Enclosure. Plug on the AC adaptor enclosed, turn on the power
switch, after your computer detects this device as a removable hard disk, you
installation is successful.
(Users of Windows 98 need to download the driver first)
LED Indicator:
1. Blue light is on while connecting
2. Blue light is flashing while loading or writing data.
3. Fan: Power on switch at the back panel.
V. Special OTB Functions
•One Touch Button File Backup
Dowload OTB software:
http://www.coolmaxusa.com/otb.asp
Instructions:
http://www.coolmaxusa.com/usermanual.asp
VI. System requirements
PC Users

- USB 2.0 Hi-Speed PCI card installed in your computer or the System built in
USB 2.0 host ports already
- Pentium X86 processor or above
- OS, Microsoft Windows 98 SE, 2000 Professional, Me, or XP Home,
XP Professional, Vista.
Note: Windows 98 user, please download the driver from
http://www.coolmaxusa.com/drivers.asp
Mac OS Users
- Apple Macintosh G4 or G3 (blue and White G3 only) or iMac computer
with built-in USB controller
-Mac OS 8.6 or above with Mac OS USB v1.3.3 or above, including OS X
Mac OS uses FAT32 format only for hard drives
•Note:
1. To uninstall from PC, users must stop the 3.5" HDD Enclosure first. For Mac
users should select the drive icon and use the Put Away command or drag the icon
onto the trash icon.
2. When hard disk is working, please do not move, distress or knock around it in
order to protect the hard disk.
VII. Environment conditions
Operating Environment Limit
Temperature: Between 10 ~ 60 (37 F ~ 140 F)
Humidity: From 5% ~ 85%
Storage Environment Limit
Temperature: Between -30 ~ 80 (-22 F ~ 176 F)
Humidity: 5% ~ 90%
VIII. Materials included
1. 3.5" HDD Aluminum Enclosure
2. USB 2.0 Type A to Type B Cable
3. Accessories pack (screws)
4. DC12V/DC 5V --2.0A Adaptor
(Note: Adaptor enclosed shall be only for HD-381 series unit only; we will not be
responsible for any damages if users use this on any other applications.)