Coomber Dance Combo 45790 Series Specification sheet

Product Instruction Manual
Your new Coomber Accessorise your Coomber
We also produce a comprehensive range
of accessories that can help you get more
from your Coomber:
Please contact
Coomber
to place your
order now!
…………………………………………………… …………………………………………………….
Dance Combo 45790 Series
Mains Cable 1820 Loudspeaker stand
Telescopic handle
All controls at the
back of the unit
Speakers
Controlling & Connecting
Included in the box
ON/OFF
Switch
Master
Volume
Battery charging indicators
Microphone
sockets
CD slot
Bluetooth
Switch between
mic or line
Input volume/mixers
Line in or
Aux in
(iPod,MP3)
Voice
Priority
switch and
LED
1918 Wired Microphone
CD ON/OFF
switch
USB port SD card slot
(SD/SDHC)
Mode button
CD Volume
Control
CD/USB/SD Player option
*See separate instructions for full details of CD and remote
control functions
Switch on CD player with the on/o control and use the
volume button along with the main master volume to
control the sound.
41243 or 41244 iPod lead

…..……………………………………………………
Product Instruction Manual
See Website for Full Safety Information
• Do not use in conned space.
• All Coomber equipment is covered by a 12 months warranty against
defective components or faulty manufacture from date of dispatch.
• Any modications to or misuse of the equipment renders this warranty void.
• Equipment that is security marked or damaged cannot,
under any circumstances, be exchanged.
• We reserve the right to change products and specications without notice.
Dance Combo v2 45790 Series
….…………………………………………….………
UHF1 Models option
A wireless microphone receiver is built into this unit
• Switch the on/o and volume control on the UHF– PLL
• A/B LED will light up to say the receivers are on.
• Leave the microphone switched o.
• Set the transmitter to a free channel, press the SET button,
the screen will then ash, select a channel and press SET again
If the LED RX lights up but you microphone is still switched o
this means there is interference from other signal select a
dierent channel.
• Switch on your microphone and if set to the same channel as
the receiver then the RX will light up to indicate reception of a
radio signal. The LED AF will light up if the transmitter transmits
an audio signal of sucient level.
………….…….………………………………………
Connecting an iPod or
External audio device
• Using the supplied iPod lead, connect to the headphone
output of the external device (iPod/Phone/Laptop) to the
stereo Aux input or Line in (depending on cable provided).
• Adjust the volume on your device and, then the volume
button above the Aux in plus the main volume on the unit.
• You can use the Dance Combo v2 to adjust the
tone & balance.
Power connection/
recharging the baeries
………………………………………………….……
Bluetooth
• Turn the unit on.
• Enable Bluetooth on your device– iPod/
iPhone etc.
• Press the Bluetooth button on the
unit. This will then ash.
• When discovered TXA SERIES will be
displayed on your device.
• Select pair or connect on your device.
• An audio notication will be heard and also connected or
paired will be shown on your device. The LED will now be lit
continuously.
• Turn the volume up on your device, you will be able to play
music on your device and amplify it with the Dance Combo v2.
• Use the Bluetooth volume (above Bluetooth symbol) and
Master volume buttons.
NOTE: If another device is already paired/connected you will not be
able to pair at the same time. You will need to switch the unit o and
on then try again or turn o the Bluetooth on the other device.
• Connect the mains cable provided to the socket at the back
of the unit, connect to mains power and switch on.
• The batteries will automatically recharge when connected to
mains power, four LED lights will light up
continuously until 50% charged then the upper
two will light up until fully charged. When charging
is complete the “Full” will then light up.
• It is not necessary to switch on the unit to
recharge but the unit can be operated when
charging is in progress.
• If the unit is always stored with the batteries
fully charged, then many years of use should be
achieved before replacement is required.
Please fully charge the batteries before storage.
Wired Microphones
….…………………………………………….………
Two microphones can be connected
• Mic 1 via an XLR plug or a 6.3mm plug: set the selector switch
to “MIC”
• Mic 2 via a 6.3mm jack plug
NOTE: Use the “VOICE PRORITY” button, once pressed this will be
illumined. The volume of music being played will be substantially
reduced while announcements via a microphone connected are being
made. Press the button again to deactivate.
ON/OFF & Volume Control
RX LED AF LED
Channel selection buttons
SET button
NOTE: Set all the volumes controls down to low before
connecting the speakers, then use the individual volume and
main volume to control the levels.
External Speakers Option (model:45791-SP)