Coonara 8000 Series User manual

1
8000 Series Thermostat

2
Quick Start Guide
On/Off
Press and release the button to turn the thermostat on and off.
Setting the day of the week and time
With the thermostat off, press and hold the ‘T’ button for 2 seconds or longer
to initiate programming the time. Time, the hour setting and AM/PM will
flash.
Setting the hour function
Press and release the  or  button to increase or decrease the hour setting
by 1 hour.
Press ‘OK’ to accept
Setting the minute function
Press and release, or press and hold the  or  button to increase or
decrease the minute setting by 1 minute.
Press ‘OK’ to accept.
Setting the day of the week function
Press and release the  or  button to change the day of the week to the following
or previous day. Press and hold the  or  button for 2 seconds or longer to increase
or decrease the day of the week by 1 day every .5 seconds.
Press ‘OK’ to complete setting.
The time and day of the week is now set.

3
Manual mode
Manual mode does not require that the time and day of the week are set.
Flame height and fan speed
Press the  or  button to increase or decrease the Fan speed and Flame height.
Automatic mode
The automatic mode allows the temperature to be regulated according to a programmed
level and time.
Manually overriding the set program
At any time, the temperature may be adjusted up or down. However, whenever the
thermostat changes to a new time period, the temperature will be set automatically
according to that period’s setting.
Programming
Each day of the week can be programmed individually for 4 periods P1, P2, P3 and P4,
making a total of 28 programmed periods.
Alternatively, a weekday program can be set, so the same program is used for Monday-
Friday. Similarly, a weekend program can be set for Saturday-Sunday. The entire week can
also have the same program.
Alternatively, a weekday or weekend program can be set with individual programs for the
remaining days.
The suggested period settings for each day/s are:
Period 1 - morning
Period 2 - daytime
Period 3 - evening
Period 4 - night-time
To egin programming
With the thermostat off, press and hold the ‘P’ button for 2 seconds or longer to
initiate programming. The LCD will display , and the time at which the
thermostat is currently set. will flash.
Period 1 can now be set.

4
Setting the day of the week
You must choose which day/s of the week you wish to program.
Press and release the  or  button to change the day of the week to the
following or previous day. Press and hold the ‘ or  button for 2 seconds or
longer to increase or decrease the day of the week by 1 day every .5 seconds.
The order that you can scroll through the days is as follows:
MO  TU  WE  TH  FR  MO TU WE TH FR  SA  SU  SU SA  MO
TU WE TH FR SA SU
To accept the selected day/s of the week press ‘OK’.
Setting the period starting time
The hour and AM/PM settings will now flash. To set the P1 starting time, press
and release the  or  button to increase or decrease the hour setting. Press
and hold the  or  button for 2 seconds or longer to increase or decrease the
hour setting by 1 hour every .5 seconds.
Please ensure that AM/PM is set correctly.
Press ‘OK’ to accept
The minute setting will now flash. Adjust the minute setting similarly, using ‘
or  button
Press ‘OK’ to accept
Setting the temperature
The temperature setting will now flash. Press and release the  or  button to
increase or decrease the temperature setting by 1 °C. Press and hold the  or
 button for 2 seconds or longer to increase or decrease the temperature
setting by 1°C every .5 seconds.
To accept the temperature press ‘OK’.
Period 1 is now set for the day/s of the week that you have chosen. The LCD will display
to indicate that Period 2 can now be set for the same day/s of the week.
Repeat the programming process for periods 3 and 4.
After program 4 is set, press 'OK' and the program for the selected day/s will be set.
Repeat the programming process for any other periods/days that are required.

5
Restore factory default settings
With the thermostat off, press the following sequence of buttons: ‘P’, ‘T’, ‘T’ again, .
Teaching RF thermostat ID code to control unit
CAUTION: The thermostat has already been programmed with a unique code. Do not
attempt to teach the RF Thermostat ID code unless instructed by the manufacturer.
With the thermostat off, press the following sequence of buttons: ‘P’, ‘T’, ‘T’ again, .
The LCD display will show ‘LC’ (Learn Code) for 2 seconds then return to the normal OFF
state display. During this time a special code will be transmitted by the RF Thermostat to the
Control Unit, causing the Control Unit to learn its ID.
LED Lighting Mode – Coonara Mosman Models Only
Setting the LED lighting
Press and hold the ‘MODE’ button for 3 seconds to enter lighting mode. When you
release the MODE the button L I should be displayed on LCD.
To adjust the colour setting press ‘’ button until desired colour has been reached.
will be displayed on LCD.
To adjust the brightness setting press ‘’ button until desired brightness has been
reached. will be displayed on screen.
To keep the LED on and return to manual/auto mode hold down the ‘MODE’ hold
button for 3 seconds and release.
To keep the LED on but turn the heater off press and release the button in manual
or auto modes.
To turn off both the LED and Heater press and hold the in manual or auto mode for
5 seconds. Heater will turn off followed by LED’s. When in LI Mode turns ON/OFF
LED’s.