Cooper & Co Emerson TVU-FJI390-NA User manual

ITEM NUMBER: TVU-FJI390-NA
cooperandco_australia
Emerson
TV Unit
ASSEMBLY
INSTRUCTIONS
Cooper & Co®is developed and distributed by UGT International.
ASSEMBLY INSTRUCTIONS

TIPS BEFORE YOU START
1. Sit back, take a deep breath, and get ready to dive into the laid-back world of furniture assembly. We've got
your back with some simple instructions that will have you relaxing with your amazing new piece in no time.
2. Please check that all parts are present before you start the assembly of your furniture.
3. For ease and speed of assembly, we recommend that before you commence each step of the assembly,
that you identify all the parts required for that step.
4. For larger items, please ensure that you have sufficient space and people to assemble your product safely.
5. We recommend that, where possible, all items are assembled near to the area in which they will be placed
in use, to avoid moving the product unnecessarily once assembled.
6. For the protection of your furniture, we recommend that the product is placed on a protected surface
during assembly to prevent any damage.
7. During assembly please take care not to over-tighten any fittings, as this may damage the product.
Do not use power tools.
8. Always place the product on a flat, steady and stable surface.
9. Do not stand on the product. Do not use the product as a stepladder.
10. This product is intended for indoor, household use only as it is a non-industrial product.
11. Please use caution and care when lifting the product to avoid personal injury and/or product damage.
ASSEMBLY REQUIREMENTS
• 2m x 2m assembly space required. Give your furniture some breathing room!
• Approximately 2 hour assembly time. Remember, it's not a race,
so take your time, enjoy the process.
• 2 x adults required, enlist the help of your favourite tag team.
Cooper & Co is your go-to source for homeware that's as stylish as it is affordable!
With our carefully curated selection, we aim to bring you the best of both worlds,
ensuring that you can create a space that reflects your personal style without
breaking the bank.
We're on a mission to sprinkle some pizzazz into every home. Whether you're
looking to transform your living room, kitchen, or bedroom into a masterpiece,
fret not! With us, you don't have to sacrifice quality or design.
Cheers for making this yours!
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS

QUICKFIT
Tighten quickfit until shoulder is flush with panel. Do not overtighten or undertighten.
CAM LOCK
When fitting cam lock, ensure starting position is correct before you insert connecting quickfit.
Quickfit head should be in the centre of the cam lock when the two
panels are joined. Cam lock should be inserted before quickfit. Turn cam lock clockwise to tighten.
USING CAM LOCK & QUICKFIT
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
PANEL PANEL
SHOULDER
CORRECT INCORRECT

PARTS LIST
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
9
13
123
567
10 11
4
8
12
x1 x1 x1 x1
x1 x2 x1 x2
x1 x4 x2 x1
x1
14 15
x2 x2

HARDWARE
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
x16 x16 x24 x24
A B C D
x8 x1 x4 x4
E F G H
x4 x6 x2 x16
I J K L
x16 x4 x8 x2
M N O P
x2 x2 x2 x2
Q R S T

ASSEMBLY INSTRUCTIONS
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
x6
A
x4
B
x4
C
3
3
4
4
A
A
A
A
A
A
B
C
B
B
B
C
C
C
7
4
3

ASSEMBLY INSTRUCTIONS
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
2
3
4
5
x2
A
x2
B
x2
C
B
B
C
C
6
6
A
A

ASSEMBLY INSTRUCTIONS
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
STEP 5
STEP 6
3
4
14
B
B
C
C
5
2
x2
B
x2
C
6
6

ASSEMBLY INSTRUCTIONS
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
STEP 7
STEP 8
R
QA
A
A
A
A
A
A
A
1
x8
B
x8
C
x8
A
x2
Q
x2
R
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
1
5
2
4
3

14
15
15
ASSEMBLY INSTRUCTIONS
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
STEP 9
STEP 10
9
11
11
K
K
x2
K

ASSEMBLY INSTRUCTIONS
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
STEP 11
STEP 12
E
E
E
C
C
C
E
C
C
C
C
C
E
E
E
E
9
5
4
3
2
F
I
HG
J
J
J
J
J
J
10
10
10
10
9
x1
x4
x4
x4
F
G
H
I
J
x6
x8
C
x8
E

ASSEMBLY INSTRUCTIONS
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
STEP 13
STEP 14
x8
D
x4
N
x16
L
x16
M
L
M
14
14
15
15
5
12
13
D
D
N

ASSEMBLY INSTRUCTIONS
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
STEP 15
STEP 16
x8
O
x2
P
x16
D
12
13
5
2
D
D
DD
8
8
2
3
4
5
O
O
O
O
O
O
O
O
P

ASSEMBLY INSTRUCTIONS
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
STEP 17
STEP 18
x2
S
x2
T
WARNING!
IN ORDER TO PREVENT OVERTURNING
THIS PRODUCT MUST BE USED WITH
THE WALL ATTACHMENT DEVICE
PROVIDED
FOR FLOOR STANDING UNITS INTENDED
TO BE ATTACHED TO THE BUILDING:
T
R
S
1

ASSEMBLY INSTRUCTIONS
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International. ITEM NUMBER: TVU-FJI390-NA
ASSEMBLY INSTRUCTIONS
MAXIMUM RECOMMENDED WEIGHT IS 30KGs ON TOP AND 5KGs INSIDE EACH SHELF.
Your new product is ready for use.
RECOMMENDED WEIGHT
MAX:
30kg
MAX:
5kg
MAX:
5kg
MAX:
5kg MAX:
5kg
MAX:
5kg
MAX:
5kg

WALL AFFIXING GUIDE
NOTE: Supplied wall plugs are only suitable for use in plasterboard walls.
If you have any doubts about using the correct plug for your wall, please seek professional advice.
Failure of the product due to using incorrect fixings is the responsibility of the installer.
IMPORTANT:
When drilling into walls, always check for hidden wires or pipes, etc.
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International.
ASSEMBLY INSTRUCTIONS
TIPS & TRICKS
Make sure that the hardware used is suitable for supporting your unit.
Please consult a qualified tradesperson if unsure.
• Take extra care when drilling high walls, ceiling and ceramic tiles. Ensure wall plugs are
inserted beyond the thickness of the ceramic tiles to avoid splitting or cracking.
• If you are unsure, please select a larger screw and wall plug.
• Ensure that you use the recommended drill bit to match the wall plug and hole size.
• Ensure that wall plugs are well fitted and are a tight fit in the drilled hole.
TYPES OF WALLS
Use one of the following types of wall plug (not included) if your walls are made of brick, breeze
block, concrete, stone or wood. Screws may be able to be fixed directly to solid wood walls as they
will provide a secure anchor point.
GENERAL PURPOSE WALL PLUG
Generally, aerated blocks should not be
used to support heavy loads, use a
specialist fitting in this case. For light loads,
general purpose wall plugs can be used.
PLASTERBOARD WALL PLUG
For use when attaching light loads onto
plasterboard partitions.
CAVITY FIXING WALL PLUG
For use with plasterboard partitions or
hollow wooden doors.
CAVITY FIXING HEAVY DUTY
WALL PLUG
For use when fitting or supporting heavy
loads such as shelving and wall cabinets.
HAMMER FIXING WALL PLUG
For use with concrete block or brick walls, or
walls stuck with plasterboard. The hammer
fixing allows it to be fixed to the wall rather
than the plasterboard. Always check the
fixing is secure to the retaining wall.
SHIELD ANCHOR WALL PLUG
HEAVY LOADS
For use with concrete or brick walls, or for
use with heavier loads such as TV & HiFi
speakers and satellite dishes, etc.

HINGE ADJUSTMENT GUIDE
cooperandco_australia
Cooper & Co®is developed and distributed by UGT International.
ASSEMBLY INSTRUCTIONS
PROJECTIVE LINE OF TOP PANEL PROJECTIVE LINE OF TOP PANEL
THE DOOR SHOULD MOVE IN A LITTLE THE DOOR SHOULD MOVE OUT A LITTLE
STEP 1
Open the door.
STEP 2
Adjust the door move in or out a little.
Loosen the screw indicated a little,
adjust the hinge to right position
(see Step 2A & 2B), then tighten screw. Push the hinge back a little. Push the hinge forward a little.
Turn the screw clockwise a little as
shown to make the gap big.
Turn the screw counterclockwise a
little as shown to make the gap small.
STEP 3
To adjust the gap between door & leg.
STEP 2A
Move door in.
STEP 3A
Move door right.
STEP 2B
Move door out.
STEP 3B
Move door left.
Loosen or tighten the screw indicated
a little to adjust the gap between door
and leg (see Step 3A & 3B).
TOO SMALL GAP TOO BIG GAP

Just a few simple steps to keep your furniture looking fabulous and functioning flawlessly:
• Please periodically check all fittings and re-tighten as necessary.
• To clean your item, please use a damp cloth and wipe clean.
• To clean glass, please use glass cleaner.
• Never allow any kind of liquid to remain on your furniture.
Absorption can cause wood to warp or finishes to de-laminate.
• Please do not place hot items (eg. hot drinks) directly on to the surface.
• Please do not drag and pull your furniture.
WARRANTY
Cooper & Co products are warranted to be free from defects in materials and workmanship for the
warranty period of 12 months from the date of retail sale. Our goods come with guarantees that cannot
be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
CARE & MAINTENANCE OF YOUR PRODUCT
Cooper & Co products are waiting for you at:
www.cooperandco.com.au
Find us on Instagram at:
cooperandco_australia
Cooper & Co.® is a registered trademark of UGT International. All rights reserved.
UGT International. 63 Fairchild Street, Heatherton, Victoria, Australia, 3202.