Friant Vektor User manual

User Guide and Assembly Instructions
VEKTOR
1
Parts and Hardware
ABack (1 pc) DArmrest (1 set) GCaster (5 pcs) JBolt (5/16” * 3/4”) (3 pcs)
BSeat (1 pc) EGas Lift (1 pc) HAllen Key M5 (1 pc) KBolt (5/16” * 1 1/4”) (4 pcs)
CSeating Mecanism (1 pc) FBase (1 pc) IAllen Key M4 (1 pc) LBolt (1/4” * 1 3/4”) (6 pcs)

2
Assembly Instructions
1 pc
1 pc
1 pc
5 pcs
4 pcs
Step 1
Attach Back [A] to Seat Mechanism [C]
with bolts [J] using Allen Key [H]. Set
aside.
Step 2
Attach Armrest [D] to Seat [B] with Bolts
[L] using Allen Key [I]. .
Step 4
Insert Casters [G] into Base [F].Push hard
until you feel or hear the casters snap into
place.
Step 5
With the base [F] upright and the casters
[G] on the oor, insert the gas lift [E] into
the base [F].
Step 6
Attach the seating mechanism onto the
gas lift [E].Apply pressure onto Seat [B].
Step 3
Attach Seating Mechanism [C] to Seat [B]
with bolts [K] using Allen Key [H].
To access the inserts for the bolts, release
the seat slider mechanism by pulling the
tab highlighted above.
H1pc
C1pc
A1pc
J3pcs
B
I
L
D
6 pcs
1 set
1 pc
1 pc
H
E
F
G
K

3
User Guide
23 4
5 6
6
7
Functions:
1. Turning the dial under the seat controls the tension of Back when reclining.
2. Lever on the right closest to the front of the chair allows the seat to go forward and backwards.
3. Lever on the right closest to the back allows the seat to go up and down.
4. Armrests are able to swivel inward and outward.
5. Push the button on the outside of the armrest to adjust the height of the armrest.
6. Raise or lower the lumbar support behind the seat back as required.
7. Use lever on the left side of the chair to lock the chair from reclining back.
1
Vektor

4
1980 West Avenue 140th, San Leandro CA 94577/ TEL: 877.828.410 / http://www.friant.com
Product Dimensions
38 in - 42 in
18.5 in
22 in - 25 in
17 in - 21 in
8 in - 11 in
20 in
Dec 2019
ALL
WOR KSTYLES
WELCOME