Cooper & Hunter MAJESTY Series User manual
OWNER’S MANUAL
For proper operation, please read and keep this manual carefully.
Designed by Cooper&Hunter International Corporation, FL Miami, USA
www.cooperandhunter.com
Heat Pump Air To Air
Split Air Conditioner
MAJESTY Series
1
OWNER’S MANUAL
EXPLANATION OF SYMBOLS
EXCEPTION CLAUSES
Manufacturer will bear no responsibilities when personal injury or property loss is caused by the
following reasons:
1. Damage the product due to improper use or misuse of the product;
2. Alter, change, maintain or use the product with other equipment without abiding by the
instruction manual of manufacturer;
3.
4.
product;
5. Operate, repair, maintain the unit without abiding by instruction manual or related
regulations;
6.
performance of parts and components that produced by other manufacturers;
7. The damage is caused by natural calamities, bad using environment or force majeure.
WARNING This symbol indicates the possibility of death or
serious injury.
CAUTION This symbol indicates the possibility of injury or
damage to property.
NOTICE
Indicates important but not hazard-related
information, used to indicate risk of property
damage.
If it needs to install, move or maintain the air conditioner, please contact dealer or local
by appointed unit. Otherwise, it may cause serious damage or personal injury or death.
When refrigerant leaks or requires discharge during installation, maintenance, or disas-
local laws and regulations.
This appliance is not intended for use by persons (including children) with re-
duced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they have been given supervision or instruction con-
cerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
2
REFRIGERANT
Appliance
gas R32.
Before install
the appliance,
read the
installation
Before use the
appliance,
read the
owner’s
Before repair
the appliance,
read the service
• To realize the function of the air conditioner
unit, a special refrigerant circulates in
the system. The used refrigerant is the
Furthermore, it can lead to explosion under
the refrigerant is very low. It can be ignited
• Compared to common refrigerants, R32 is a
nonpolluting refrigerant with no harm to the
house effect is also lower. R32 has got very
good thermodynamic features which lead
WARNING
Do not use means to accelerate the defrosting
process or to clean, other than those recomm-
ended by the manufacture. Should repair be
necessary, contact your nea rest authorized
Service Centre. Any repairs carried out by unq-
liance shall be stored in a room without contin-
uously operating ignition sources. (for example:
operating electric heater.) Do not pierce or burn.
Appliance shall be installed, operated and stored
2.
(Please refer to table «a» in section of «Safety
For repairs, strictly follow manufacturer’s
instructions only. Be aware that refrigerants
may not contain an odor . Read specialist’s
manual.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience an d knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
Hereby, Our company, declares that this Air
Conditioner is in compliance with the essential
requirement and other relevant provisions of RE
Directive 2014/53/EU. A copy of the full DoC is
attached. Wireless frequency range: 2412MHz –
2472MHz Maximum Transmit Power: 18dBm
R32: 675
This marking indicates that this
product should not be disposed
with other house hold wastes.
To prevent possible harm to the
environment or human health
from uncontrolled waste throu ghout the EU.
To prevent possible harm to the environment or
human health.
From uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse
of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environmental safe recycling.
If it needs to install, move or maintain the air
conditioner, please contact dealer or local service
be installed, moved or maintained by appointed
unit. Other wise, it may cause serious damage or
personal injury or death.
3
OWNER’S MANUAL
SAFETY OPERATION
OF FLAMMABLE REFRIGERANT
All the work men who are engaging in the
refrigeration system should bear the valid
with the refrigeration system recognized
by this industry. If it needs other technician
to maintain and repair the appliance,
they should be supervised by the person
It can only be repaired by the method
suggested by the equipment’s manufacturer.
The air conditioner must be installed in a
room that is larger than the minimum room
area. The minimum room area is shown on
the nameplate or following table a.
It is not allowed to drill hole or burn the
connec-tion pipe.
Leak test is a must after installation.
TA2)
Check whether the maintenance area or
the room area meet the requirement of the
nameplate.
- It’s only allowed to be operated in the
rooms that meet the requirement of the
nameplate.
Check whether the maintenance area is well-
ventilated.
- The continuous ventilation status should
be kept during the operation process.
maintenance area; and the “no smoking”
warning board should be hanged.
Check whether the appliance mark is in good
condition.
- Replace the vague or damaged warning
mark.
If you should cut or weld the refrigerant
system pipes in the process of maintaining,
please follow the steps as below:
A. Shut down the unit and cut power supply
B. Eliminate the refrigerant
C. Vacuuming
D. Clean it with N2gas
E. Cutting or welding
F. Carry back to the service spot for weldin
The refrigerant should be recycled into the
specialized storage tank.
near the outlet of the vacuum pump and it’s
wellventilated.
Charge
amount
(kg)
Floor
location
Window
mounted
Wall
mounted
Ceiling
mounted
////
1.3 14.5 5.2 1.6 1.1
1.4 16.8 6.1 1.9 1.3
1.5 19.3 7 2.1 1.4
1.6 22 7.9 2.4 1.6
1.7 24.8 8.9 2.8 1.8
1.8 27.8 10 3.1 2.1
1.9 31 11.2 3.4 2.3
2 34.3 12.4 3.8 2.6
2.1 37.8 13.6 4.2 2.8
2.2 41.5 15 4.6 3.1
2.3 45.4 16.3 5 3.4
2.4 49.4 17.8 5.5 3.7
2.5 53.6 19.3 6 4
4
lized for R32. Make sure that different kinds
of refrigerant won’t contaminate with each
other.
The refrigerant tank should be kept upright at
detection before test running; another time
of leak detection should be done when it’s
removed.
check before unload and open the container.
According to the local rules and laws.
SAFETY PRECAUTIONS
Installation or maintenance must be
The appliance shall be installed in
accordance with national wiring regulations.
According to the local safety regulations,
circuit breaker.
All wires of indoor unit and outdoor unit
should be connected by a professional.
Be sure to cut off the power supply before
proceeding any work related to electricity
and safety.
Make sure the power supply matches with
the requirement of air conditioner.
Unstable power supply or incorrect wiring
or malfunction. Please install proper
power supply cables before using the air
conditioner.
The grounding resistance should comply
with national electric safety regulations.
Air Conditioner should be properly
grounded. Incorrect grounding may cause
electric shock.
Do not put through the power before
Do install the circuit breaker. If not, it may
cause malfunction.
An all-pole disconnection switch having a
contact separation of at least 3mm in all
Circuit breaker should be included magnet
buckle and heating buckle function. It can
protect the overload and circuitshort.
WARNING
5
OWNER’S MANUAL
SAFETY PRECAUTIONS
This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
If the supply cord is damaged, it must be
replaced by the manufacturer, it’s service
to avoid a hazard.
Do not connect air conditioner to multi-
hazard.
Do disconnect power supply when cleaning
air conditioner. Otherwise, it may cause
electric shock. Do not wash the air conditioner
with water to avoid electric shock.
Do not spray water on indoor unit. It may
cause electric shock or malfunction. Do not
repair air conditioner by yourself. It may
cause electric shock or damage. Please
contact dealer when you need to repair air
conditioner.
or air outlet. It may cause personal injury or
damage.
Instructions for installation and use of this
product are provided by the manufacturer.
Select a location which is out of reach
for children and far away from animals or
plants. If it is unavoidable, please add the
fence for safety purpose.
The indoor unit should be installed close to
If the length of power connection wire is
a new one.
The appliance must be positioned so that
the plug is accessible.
For the air conditioner with plug, the
installation.
For the air conditioner without plug, a
circuit breaker must be installed in the line.
The yellow-green wire in air conditioner
is grounding wire, which can’t be used
for other purposes. The air conditioner is
be properly grounder with specialized
grounding device by a professional. Please
make sure it is always grounded effectively,
otherwise it may cause electric shock.
The temperature of refrigerant circuit will
be high, please keep the interconnection
cable away from the copper tube.
WARNINGCAUTION
6
Do not spill water on the remote controller,
otherwise the remote controller may be
broken.
block air outlet or air inlet. It may cause
malfunction.
Do not step on top panel of outdoor unit, or
put heavy objects. It may cause damage or
personal injury. When below phenomenon
occurs, please turn off air conditioner and
disconnect power immediately, and then
for service:
Power cord is overheating or damaged.
There’s abnormal sound during operation.
Circuit breaker trips off frequently.
Air conditioner gives off burning smell.
Indoor unit is leaking.
WARNING
SAFETY PRECAUTIONS
7
OWNER’S MANUAL
Do not operate the UV-C emitter when it is
removed from the appliance.
To avoid any dangerous situations, the user
shall not replace the UV-C lamp, which
must be performed by the manufacturer
or the professionals of the maintenance or
similar department.
UV-C LAMP FUNCTION INSTRUCTION
This appliance contains a UV emitter. Do not
stare at the light source.
This appliance contains a UV-C lamp.
Read the maintenance instructions before
opening the appliance.
Details for cleaning and other user
maintenance of the appliance:
1. Prior to cleaning or other maintenance,
the appliance must be disconnected
from the supply mains.
2.
3. Use a soft cotton cloth to wipe the
quartz glass until it’s clean.
4.
cleaned and then close the panel cover.
The method, frequency of cleaning, and
necessary precautions to be taken:
Cleaning method: wipe the quartz glass
with soft cloth until the surface is clean.
Cleaning frequency:
clean it every 6 months;
the cleaning frequency can be properly
adjusted according to the degree of air
cleanliness.
Preventive measures:
1. The unit must be turned off and the
power must be cut off before cleaning.
Otherwise, it may cause electric shock
and damage by UV.
2. Do not use volatile oil, alcohol, diluents
or lacquer to clean the UV-C lamp.
Otherwise, the UV-C lamp may be
damaged.
prevent scalding.
4. Do not scratch the surface of glass
when wiping it.
Unintended use of the appliance or damage
to the housing may result in the escape of
dangerous UV-C radiation. UV-C radiation
may, even in small doses, cause harm to the
eyes and skin.
Appliances that are obviously damaged
must not be operated.
Before opening doors and access
panels bearing the ultraviolet radiation
hazard Symbol for the conducting user
maintenance, it is recommended to
disconnect the power.
CAUTION
CAUTION
UV-C barriers bearing the ultraviolet
radiation hazard symbol should not be
removed.
8
INSTALLATION NOTICE
To ensure safety, please be mindful of the
following precautions.
to the wall
Space to the floor
Space to the wall
At least 15cm
Space
At least 15cm
Space to the ceiling
At least 15cm
At least 250cm
Space to the obstruction
At least 300cm
When installing or relocating the unit, be
sure to keep the refrigerant circuit free from
refrigerant.
Any presence of air or other foreign
substance in the refrigerant circuit will
cause system pressure rise or compressor
rupture, resulting in injury.
charge the refrigerant which is not comply
refrigerant.
Otherwise, it may cause abnormal
operation, wrong action, mechanical
malfunction or even serious safety accident.
besure that the unit is running in cooling
If refrigerant recovery takes too much time,
air may be sucked in and cause pressure rise
or compressor rupture, resulting in injury.
During refrigerant recovery, make sure
If compressor starts running when stop
valve is open and connection pipe is not
yet connected, air will be sucked in and
cause pressure rise or compressor rupture,
resulting in injury.
When installing the unit, make sure that
before the compressor starts running.
If compressor starts running when stop
valve is open and connection pipe is not
yet connected, air will be sucked in and
cause pressure rise or compressor rupture,
resulting in injury.
If there is leaked gas around the unit, it may
cause explosion and other accidents.
connections. If the electric wire is not long
enough, please contact a local service
so that their
WARNING
WARNING
9
OWNER’S MANUAL
INSTALLATION NOTICE SELECTION OF
INSTALLATION LOCATION
1. Level meter
2. Screw driver
3. Impact drill
4. Drill head
5. Open-end wrench
6. Pipe cutter
7. Leakage detector
8. Universal meter
9. Inner hexagon spanner
10. Measuring tape
11. Pipe expander
12. Torque wrench
13. Vacuum pump
14. Pressure meter
Installing the unit in the following places
may cause malfunction. If it is unavoidable,
please consult the local dealer:
1. The place with strong heat sources, vapors,
objects spread in the air.
2. The place with high-frequency devices
(such as welding machine, medical
equipment).
3. The place near coast area.
4. The place with oil or fumes in the air.
5. The place with sulfureted gas.
6. Other places with special circumstances.
7. The appliance shall not be installed in the
laundry.
8. It’s not allowed to be installed on the
unstable or motive base structure (such
as truck) or in the corrosive environment
(such as chemical factory).
1. There should be no obstruction near air
inlet and air outlet.
2. Select a location where the condensation
water can be dispersed easily and won’t
affect other people.
3. Select a location which is convenient to
connect the outdoor unit and near the
power socket.
4. Select a location which is out of reach for
children.
5. The location should be able to withstand
the weight of indoor unit and won’t
increase noise and vibration.
6.
7. Don’t install the indoor unit right above the
electric appliance.
8. Please try your best to keep way from
Please contact the local agent for
installation.
NOTICE
10
1. Must follow the electric safety regulations
when installing the unit.
2. According to the local safety regulations,
switch.
3. Make sure the power supply matches
with the requirement of air conditioner.
Unstable power supply or incorrect
wiring or malfunction. Please install
proper power supply cables before using
the air conditioner.
4. Properly connect the live wire, neutral
wire and grounding wire of power socket.
5. Be sure to cut off the power supply
before proceeding any work related to
electricity and safety.
6. Do not put through the power before
7. If the supply cord is damaged, it must be
replaced by the manufacturer, its service
order to avoid a hazard .
8. The temperature of refrigerant circuit will
be high, please keep the interconnection
cable away from the copper tube.
9. The appliance shall be installed in
accordance with national wiring
regulations.
1.
appliance. It must be properly grounded
with specialized grounding device by a
professional. Please make sure it is always
grounded effectively, otherwise it may
cause electric shock.
2. The yellow-green wire in air conditioner is
grounding wire, which can‘t be used for
other purposes.
3. The grounding resistance should comply
with national electric safety regulations.
4. The appliance must be positioned so tha t
the plug is accessible.
5. An all-pole disconnection switch having a
SELECTION OF INSTALLATION LOCATION
11
OWNER’S MANUAL
INSTALLATION OF INDOOR UNIT
Recommend the installation location to the
1. Choose the position of piping hole according
to the direction of outlet pipe. The position
of piping hole should be a little lower than
the wall-mounted frame, shown as below.
1. The pipe can be led out in the direction of
right, rear right, left or rear left.
screws should be uniform.
3. Open a piping hole with the diameter of Ø55
or Ø70 on the selected outlet pipe position.
In order to drain smoothly, slan t the piping
hole on the wall slightly downward to the
outdoor side with the gradient of 5–10°.
1. Hang the wall-mounting frame on the wall;
adjust it in horizontal position with the
level meter and then point out the screw
2.
should be the same as the plastic expansion
particles in the holes.
3. Fix the wall-mounting frame on the wall with
tapping screws and then check if the frame
plastic expansion particle is loose, please
rear left
right
left
rear right
The wall panel is for illustrative purposes
only, please refer to the actual installation.
Please refer to the actual circumstances for
the number of screws and the position of
screws.
Pay attention to
dust prevention and
take rele vant safety
measures when
opening the hole.
NOTICE
NOTICE
Indoor outdoor
5-10
Ø
55
Ø
70
12
2. When select leading out the pipe from left
or right, please cut off the corresponding
hole on the bottom case.
4. Wrap the indoor pipe and joint of connection
pipe with insulating pipe, and then wrap it
with tape.
1. Aim the pipe joint at the corresponding
bellmouth.
2. Pretighten the union nut with hand.
3. Adjust the torque force by referring to the
following sheet. Place the open-end wrench
on the pipe joint and place the torque wrench
on the union nut. Tighten the union nut with
torque wrench.
1. Connect the drain hose to the outlet pipe of
indoor unit.
2. Bind the joint with tape.
cut off
the hole
left right
INSTALLATION OF INDOOR UNIT
pipe jointunion nut pipe
union nut
torque wrench
pipe
indoor pipe
open-end
wrench
15~2015~20
30~4030~40
45~5545~55
60~6560~65
70~7570~75
insulating pipe
pipe
outlet drain hose
drain hose
outlet pipe
tape
insulating pipe
drain hose
Add insulating pipe in the indoor drain hose
in order to prevent condensation.
The plastic expansion particles are not
provided.
NOTICE
13
OWNER’S MANUAL
1. Open the panel, remove the screw on the
wiring cover and then take down the cover.
2. Make the power connection wire go through
the cable-cross hole at the back of indoor
unit and then pull it out from the front side.
3. Remove the wire clip; connect the power
connection wire to the wiring terminal
according to the color; tighten the screw
wire clip.
4. Put wiring cover back and then tighten the
screw.
5. Close the panel.
1. Bind up the connection pipe, power cord and
drain hose with the band.
2. Reserve a certain length of drain hose and
power cord for installation when binding
them. When binding to a certain degree,
separate the indoor power and then
separate the drain hose.
INSTALLATION OF INDOOR UNIT
All wires of indoor unit and outdoor unit
should be connected by a professional.
If the length of power connection wire is
a new one. Avoid extending the wire by
yourself.
For the air conditioner with plug, the
installation.
For the air conditioner without plug, an air
switch must be installed in the line. The air
switch should be all-pole parting and the
contact parting distance should be more
than 3mm.
The wiring board is for reference only,
please refer to the actual one.
NOTICE
NOTICE
panel
screw
wiring cover
Outdoor unit connection
N(1)
blue
2
black
3
brown yellow-
green
indoor unit
band
gas
pipe
liquid pipe
drain hose
indoor and
outdoor power cord
cable-cross
hole
power connection
wire
14
3. Bind them evenly
4. The liquid pipe and gas pipe should be bo-
und separately at the end.
1. Put the bound pipes in the wall pipe and
then make them pass through the wall hole.
2. Hang the indoor unit on the wall-mounting
frame.
3. Stuff the gap between pipes and wall hole
with sealing gum.
4. Fix the wall pipe.
5.
and closed to the wall.
INSTALLATION OF INDOOR UNIT
connection pipe drain hose
band
indoor power cord
connection pipe drain hose
band
indoor power cord
The power cord and control wire can’t be
crossed or winding.
The drain hose should be bound at the
bottom.
Do not bend the drain hose too excessively
in order to prevent blocking.
NOTICE
NOTICE
upper hook
indoor
wall pipe
lower hook of
wall-mounting frame
outdoor
sealing gum
15
OWNER’S MANUAL
When the surface of indoor unit is dirty, it is
recommended to use a soft dry cloth or wet
cloth to wipe it.
CLEAN AND MAINTENANCE
Turn off the air conditioner and disconnect
the power before cleaning the air
conditioner to avoid electric shock.
Do not wash the air conditioner with water
to avoid electric shock.
Do not use volatile liquid to clean the air
conditioner.
Do not use liquid or corrosive detergent
to clean the appliance and do not splash
water or other liquid onto it, otherwise, it
may damage the plastic components , even
cause electric shock.
months. If there is much dust in the operation
environment, clean frequency can be
increased.
to avoid injury.
Do not remove the panel when cleaning it.
WARNING
WARNING
NOTICE
Press the spring fasteners at both sides
in the direction indicated by the arrows.
separated from the fasteners.
Use clear water to wash it or dust catcher
grease), use warm water (45 oC) dissolved
with neutral detergent to clean it, and then
put it in a shady place to dry it.
reverse order. Push it along the guide rails
at both sides and then press the left and
direction indicated by the arrows.
Spring
fastener
Spring
fastener
16
1. Check whether air inlets and air outlets are
blocked.
2. Check whether air switch, plug and socket
are in good condition.
3.
4. Check whether mounting bracket for
outdoor unit is damaged or corroded. If
yes, please contact dealer.
5. Check whether drainage pipe is damaged
1. Disconnect power supply.
2.
3. Check whether mounting bracket for
outdo or unit is damaged or corroded. If
yes, please contact dealer. If there’re other error codes, please contact
NOTICE
NOTICE
ERROR CODE
CHECKED ITEMS BEFORE
MAINTENANCE
1. Many packing materials are recyclable
materials. Please dispose them in appropriat
e recycling unit.
2. If you want to dispose the air conditioner,
please contact local dealer or consultant
service center for the correct disposal
method.
When air conditioner status is abnormal,
temperature indicator on indoor unit will blink
to display corresponding error code. Please
code.
Please check below items before asking
for maintenance. If the malfunction still can’t
be eliminated, please contact local dealer or
It can be eliminated after restarting
professionals for service.
service.
17
OWNER’S MANUAL
CHECKED ITEMS BEFORE MAINTENANCE
Indoor unit can’t
receive remote
controller’s signal or
remote controller has
no action.
Whether it’s interfered severely
(such as static electricity, stable
voltage?)
Pull out the plug. Reinsert the plug after about
3min, and then turn on the unit again.
Whether remote co ntroller is
within the signal receiving range? Signal receiving range is 8m.
Whether there are obstacles? Remove obstacles.
Whether remote controller
is pointing at the receiving
window?
Select proper angle and point the remote
controller at the receiving window on indoor unit.
Is sensitivity of remote controller
low; fuzzy display or no display?
Check the batteries.
If the power of batteries is too low, please rep- lace
them.
No display when operating
remote controller?
Check whether remote controller appears to be
damaged. If yes, replace it.
Fluorescent lamp in room? Take the remote controller close to indoor unit.
No air emitted from
indoor unit
Air inlet or air outlet of indoor
unit is blocked? Eliminate obstacles.
Under heating mode, indoor
temperature is reached to set
temperature?
After reaching to set temperature, indoor unit will
stop blowing out air.
Heating mode is turned on just
now?
In order to prevent blowing out cold air, indoor
unit will be started after delaying for several
minutes, which is a normal phenomenon.
Air conditioner can’t
operate
Power failure? Wait until power recovery.
Is plug loose? Reinsert the plug.
Air switch trips off or fuse is burnt
out? Ask professional to replace air switch or fuse.
Wiring has malfunction? Ask professional to replace it.
Unit has restarted immediately
after stopping operation?
Whether the function setting for
remote controller is correct? Reset the function.
Mist is emitted from
indoor unit’s air
outlet
Indoor temperature and humidity
is high?
Because indoor air is cooled rapidly. After a while,
indoor temperature and humidity will be decrease
and mist will disappear.
Odours are emitted Whether there’s odour source,
such as furniture and cigarette, etc.
Set temperature
can’t be adjusted
Your required temperature
exceeds the set temperature
range?
Cooling (heating)
effect is not good.
Voltage is too low? Wait until the voltage resumes normal.
Filter is dirty?
Set temperature is in proper
range? Adjust temperature to proper range.
Door and window are open? Close door and window.
Air conditioner
operates abnormally
Whether there’s interference,
such as thunder, wireless devices,
etc.
Disconnect power, put back power, and then turn
on the unit again.
noise
Air conditioner is turned on or
turned off just now?
the unit, which is a normal phenomenon.
Cracking noise Air conditioner is turned on or
turned off just now?
This is the sound of friction caused by expansion
and or contraction of panel or other parts due to
the change of temperature.
Air guide louver can’t
be closed normally
Whether the air guide louver has
been adjusted?
Disconnect the power for 3s and then connect the
power; if the problem still exits, disconnect the
power, reinstall the air guide louver (install the
upper air guide louver and then install the lower air
guide louver) and then connect the power.
18
CONSTRUCTION OF THE INDOOR UNIT
air outlet
air inlet
filter
panel
panel
upper air guide louver
lower air guide louver
This is the general introduction and the color of indicator is only for reference. Please refer
to the actual display.
Display content may be different from the actual. Please refer to the actual display.
NOTICE
DISPLAY
Heat mode
Cool mode
Dry mode
Temp. indicator
Power indicator
Humidity indicator
When below phenomenon occurs, please
Power cord is overheating or damaged.
There’s abnormal sound during operation.
Air switch trips off frequently.
Air conditioner gives off burning smell.
Indoor unit is leaking.
yourself.
WARNING
This manual suits for next models
8
Table of contents
Languages:
Other Cooper & Hunter Air Conditioner manuals
Cooper & Hunter
Cooper & Hunter AIR MASTER INVERTER CH-S07FTXP2-NG User manual
Cooper & Hunter
Cooper & Hunter CH-S12FVX User manual
Cooper & Hunter
Cooper & Hunter CHV-5S224NMX User manual
Cooper & Hunter
Cooper & Hunter CH-HYP36CLUO User manual
Cooper & Hunter
Cooper & Hunter CH-S12FTXQ (WI-FI) User manual
Cooper & Hunter
Cooper & Hunter CHV5 Series User manual
Cooper & Hunter
Cooper & Hunter CH-IF035NK User manual
Cooper & Hunter
Cooper & Hunter 230V User manual
Cooper & Hunter
Cooper & Hunter CHML-ID09RK User manual
Cooper & Hunter
Cooper & Hunter CH-36MSPH230VO-3x12MSPH230VI-25FTLS User manual
Cooper & Hunter
Cooper & Hunter FGR20/C-M User manual
Cooper & Hunter
Cooper & Hunter UNIVERSAL Series User manual
Cooper & Hunter
Cooper & Hunter CHML-ID12NK User manual
Cooper & Hunter
Cooper & Hunter NORDIC MULTI LIGHT Series User manual
Cooper & Hunter
Cooper & Hunter PRIMA PLUS Series User manual
Cooper & Hunter
Cooper & Hunter AIR-MASTER Series User manual
Cooper & Hunter
Cooper & Hunter Arctic Series User manual
Cooper & Hunter
Cooper & Hunter Cozy inverter Series User manual
Cooper & Hunter
Cooper & Hunter CH-M18AHU Repair manual
Cooper & Hunter
Cooper & Hunter DAKOTA Series User manual
