Cooper Lighting AMETRIX C-Scroll P1R User manual

Roundel
2
Warning
These installation instructions are valid with the above Ametrix styles.
Sheet 1 of 2
1
Visor and Non-Visor
3
that all sources of power are turned off. All
performed by a certified electrician.
: Before startin any work ensure
work must meet local/national codes and be
Do not
mount fixtures vertically.
Installation Instructions
Vault C-Scroll
Small, OUTDOOR
P1R
(Pendant, 1-way, Remote ballast
ADY071467 REV B(ECN80481)
with canopy.
(2x)
set screw
(2x)
set screw
#10-32 x3/8"
4. Secure canopy usin both #10-32 x3/8" set screws.
3.
To seal door, refer to torque sequence supplementry pa e.
1. After securin fixture to ceilin , attach appropriate wires
and ensure all connections are properly matched.
2. Push wire connections into j-box and cover mountin plate
#6-32 x1/2"
#6-32 x5/8"
set screw
Securing fixture to ceiling
indicator
(2x)
When fixture head is rotated to desired an le, reti hten end
screws to secure the position.
#10-32 x5/8"
End screw
Fixture head
de rees
2.
1. To aim fixture, loosen both #10-32 x5/8" end screws. When
both indicators are lined up, the slope of the lens face is 40-
de rees. Each subsequent notch is an additional +/- 10-
Yoke arm
indicator
(x4)
(2x)
Set screw
Use
J-box
Canopy
mountin plate.
Aiming the fixture
#8-32 x 3/8"
Usin appropriate fasteners, secure fixture to ceilin .
(by others)
Run wires from pendant and j-box throu h wirin holes in
(by others)
4.
additional bracing around J-box to support fixture.
1. Usin both #10-32 x5/8" end screws, secure fixture head to
yoke on pendant and run wire throu h compression fittin
and into pendant.
2. Remove both #10-32 x3/8" set screws and allow canopy to
slide down pendant.
3.
1/4" fasteners
Use additional bracing
around J-box to support
fixture.
(by others)
1/4" fasteners
J-box
#8-32 x3/8"
Set screw
#6-32 x1/2"
Set screw
Canopy
(2x)
#6-32 x 5/8"
(by others)
End screw
Set screw
Exploded view and part call-out
Wiring & sealing the fixture
(2x)
(2x)
#10-32 x5/8"
Compression
fittin

Warning
Visor and Non-Visor
Sheet 2 of 2
Installation Instructions
Vault w/ visor C-Scroll w/ visor Roundel w/ visor
(lamps provided by others)
Lamping Size Chart
These installation instructions are valid with the above Ametrix styles
: Before startin any work ensure
Mounting Plate Dimensions In [mm]
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Small, OUTDOOR
P1R
(Pendant, 1-way, Remote ballast
ADY071467 REV B(ECN80481)
Use only GE or Sylvania
CFL lamps
Side View Top View
7
16 "
11.42
on order
Length dependant
5"
127
127
5"
1
12.70
101.60
4"
101.60
4"
25.40
1" 2"
25.40
1"
6.35
(4x)
1"
4
1
2"
12.70
FIXTURE SIZE
(inches/ mm) WATTAGE # OF LAMPS LAMP TYPE LAMP DESCRIPTION
10
3/4
/ 273.05 39 W 1 T6 Ceramic Metal Halide
12 3/4 / 323.85 70 W 1 T6 Ceramic Metal Halide
12 3/4 / 323.85 150 W 1 T6 Ceramic Metal Halide
12 3/4 / 323.85 26 W 1 4-Pin Triple
Tube Compact Fluorescent
12
3/4
/ 323.85 32 W 1 4-Pin Triple
Tube Compact Fluorescent
12 3/4 / 323.85 42 W 1 4-Pin Triple
Tube Compact Fluorescent
10 3/4 / 273.05 100 W 1 T4 Halogen (Single Ended)
12
3/4
/ 323.85 150 W 1 T4 Halogen (Single Ended)
12
3/4
/ 323.85 250 W 1 T4 Halogen (Single Ended)
LAMP
(not to scale)